Carpet Care Systems Trinity OP, Trinity CM Owner's Manual
Trinity CM
Owners Manual
Carpet Care Systems
Table of Contents
Table of contents 2
Operation and Care 3
Grounding Instructions 3
Warnings 3
Maintenance of Machine 4
Machine Specifications 4
Wiring Instructions 4
Parts list and Diagram 5
Sprayer Hookup Instructions, Handle assembly 6
Warranty 7
Changing the speeds for your Trinity 8
Page 2
Operation and care Instruction
For the Trinity OP machine.
This floor machine is a high quality, precision made product. All parts used in the manufacturing of this machine have
passed rigid quality control standards prior to assembly and an “each unit” final inspection prior to packaging is your
assurance of proper assembly. This machine was protectively packed to prevent possible damage in transit. Should
damage occur, please notify the transporting carrier immediately for loss and/or claim.
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or break-
down, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock. This appliance is
equipped with a cord having equipment grounding conductor and
grounding plug. The plug must be inserted into an appropriate outlet
that is properly installed and grounded in accordance with all local
codes and ordinances.
Risk of explosion. Floor sanding can result in an explosive
mixture of fine dust and air. Use floor-sanding machine
only in a well ventilated area free from any flame or match.
RISK OF FIRE: Do not use with a flammable or
Combustible liquid to clean a floor
DANGER means: Severe bodily injury or death can occur to you
or other personnel if the DANGER statements found on this ma-
chine or in this Owner's Manual are ignored or are not adhered to.
Read and observe all DANGER statements found in this Owner's
Manual and on your machine.
Improper connection of the equipment grounding conductor
can result in a risk of electric shock. Check with a qualified
electrician or service person if you are in doubt as to weather
the outlet is properly grounded.
Do not modify the plug provided with the appliance – if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician. Warranty is voided by removal of grounding pin.
This appliance is for use on a nominal 120- Volt circuit, and has a grounded
plug that looks like the plug illustrated in sketch A below. A temporary
adapter that looks like the adapter illustrated in sketches B and C may be
used to connect this plug to a 2-pole receptacle as shown in sketch B if a
properly grounded receptacle is not available. The temporary adapter
should be used only until a properly grounded outlet (sketch A) can be installed by a qualified electrician. The green colored ear, lug, or the like extending from the adapter must be connected to a permanent ground such
as a properly grounded outlet box cover. Whenever the adapter is used,
it must be held in place by a metal screw.
NOTE: In Canada, the use of a temporary adapter is not permitted
by the Canadian Electrical Code.
Minimum Wire Size (AWG) f
WARNING means: Injury can occur to you or to other personnel
if the WARNING statements found on your machine or in this Own-
er's Manual are ignored or are not adhered to. Read and observe all
WARNING statements found in this Owner's Manual and on your
machine.
CAUTION means: Damage can occur to the machine or to other
property if the CAUTION statements found on your machine or in
this Owner's Manual are ignored or are not adhered to. Read and
observe all CAUTION statements found in this Owner's Manual and
on your machine.
DANGER: Failure to read the Owner's Manual prior to operating or
attempting any service or maintenance procedure to your machine
could result in injury to you or to other personnel; damage to the machine or to other property could occur as well.
DANGER: To reduce the risk of fire, use only commercially available
carpet products intended for machine application.
DANGER: Risk of explosion. Floor sanding can result in an explosive mixture of fine dust and air. To reduce risk of explosion, use as
floor sanding machine only in well ventilated area.
DANGER: Operating a machine that is not completely or fully assembled could result in injury or property damage. Do not operate
this machine until it is completely assembled. Inspect the machine
carefully before operation.
Extension Cord Usage Chart
Total Extension Cord Length (Feet)
Rating-Amps 25 50 75 100 125 150 175 200
0-10.0 18 18 16 16 14 14 12 12
10.1-13.0 16 16 14 14 14 12 12 12
13.1-15.0 12 12 12 12 12 12 12 –
DANGER: Electrocution could occur if maintenance and repairs are
performed on a unit that is not disconnected from the power source.
Disconnect the power supply before attempting any maintenance
or service.
DANGER: Using a machine with a damaged power cord could result
in an electrocution. Do not use the machine if the power cord is
damaged. Do not use the electrical cord to move the machine.
Page 3
Loading...