Page 1
4101K MOBILE DESK
ASSEMBLY INSTRUCTIONS
*Model views may not represent exact model purchased
[- 1 -]
Page 2
TABLE OF CONTENTS
PAGE
REVISIONS TABLE…………………………………………………… ……………………………………………… ……………….…………………..……….… ………..……….……………… …………………...………..…………………… ………3
ASSEMBLY COMPONENTS………………………………………………… …………………………………………………… …………….…………………..……….… …….……………...………………………… ………………3
CASTER ASSEMBLY……………………………………………… …………………………………….………… ………..……….……………………………..…… ….………………………………… ….……………………………………… ……4
PULL ASSEMBLY………………………………………… …………………………………………………… …………………….…………………..………. …..……….…………….…………………… ..………………..………………………… .………5
Page 3
ITEMS INCLUDED
PART #
PART #
ASSEMBLY INSTRUCTIONS
1-HARDWARE BOX
4-CASTERS, 4" SWIVEL TOP PLATE
100081
1-CASTER HARDWARE BAG
206509
---
Original Created
6-22-09
NAM
ASSEMBLY COMPONENTS
REV DESCRIPTION DATE INITIAL
Page 4
Assembly Instructions for
4101K MOBILE DESK
Items not included but needed for assembly:
1. ½” Wrench 2. Adjustable pliers
Instructions:
1. Attach the (4) 100081 4” Swivel Top Plate, W/Brake Casters into place using the (16) 100488 Screw, ¼” -
20X1 ¼” slotted flat, (16) 218589 Washer, ¼” Flat, Zinc Plated & the (16) 100483 Nut, ¼” - 20 Hex Zinc into the
bottom of the base as shown.
Figure 1
Figure 1A Detail
Page 5
2. Reverse Pulls to Exterior of unit.
3. Clean top with water only.
Loading...