Carnes SJEA 1807 User Manual

SPECIFICATION SHEET

Model SJEA

Round Neck Stamped Louvered Diffuser

Adjustable — Surface Mount

COPYRIGHT © 2007 CARNES COMPANY

ALL RIGHTS RESERVED

SUPERSEDES 12241-D 12241-E

DIMENSIONS LISTED IN INCHES (Millimeters)

Nominal

Duct Size

Surface Mount

No. of

Model No. [Dia.] A B C D E Cones

SJEA 1205 5 (127) 12-1/2 (318) 4-7/8 (124) 3-1/8 (92) 3-1/4 (95) 1-1/4 (32) 3
SJEA 1206 6 (152) 12-1/2 (318) 5-7/8 (149) 3-1/8 (92) 3-1/4 (95) 1-1/4 (32) 3
SJEA 1207 7 (178) 12-1/2 (318) 6-7/8 (175) 3-1/8 (92) 3-1/4 (95) 1-1/4 (32) 3
SJEA 1806 6 (152) 18-1/2 (469) 5-7/8 (149) 3-15/16 (113) 4-7/16 (125) 1-1/4 (32) 4
SJEA 1807 7 (178) 18-1/2 (469) 6-7/8 (175) 3-15/16 (113) 4-7/16 (125) 1-1/4 (32) 4
SJEA 1808 8 (203) 18-1/2 (469) 7-7/8 (200) 3-15/16 (113) 4-7/16 (125) 1-1/4 (32) 4
SJEA 1810 10 (254) 18-1/2 (469) 9-7/8 (251) 3-15/16 (113) 4-7/16 (125) 1-1/4 (32) 4
SJEA 1812 12 (305) 18-1/2 (469) 11-7/8 (302) 3-15/16 (113) 4-7/16 (125) 1-1/4 (32) 4

Each unit has a removable center cone for access to the damper control rod.
Each unit inner assembly is easily removable for mounting to the duct work.
Standard finish is #11 white electrocoat enamel.

HORIZONTAL POSITION

THROW

VERTICAL POSITION

THROW

VIEW A - A

ADJUSTMENT DETAIL

MINIMUM CEILING SQUARE
OPENING IS “

A

” MINUS 1-1/4” (32)

B

DIA. OUTSIDE

A

SQUARE

E

C

D*

A

A

*Vertical Pattern Position For

Horizontal Pattern Add 5/8” (16)

Imperial [IP] Dimensions

Metric (SI) in Parentheses

CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: [phone] Fax: [phone] www.carnes.com