Carnes SJAB 2406 User Manual

SUPERSEDES 12721

12721-A

CARNES COMPANY, 448 S.Main St., P.O.Box 930040, Verona, WI. 53593-0040 Phone: 608/845-6411 Fax: 608/845-6470 E-Mail: carnes@carnes.com www.carnes.com

Models SJAB Stamped Louvered Diffuser

Aluminum Round Neck

Adjustable Discharge T-Bar Lay-in

SPECIFICATION SHEET

IP [English] Dimensions

SI (Metric) In Parentheses

Perforated material as diverter

23-3/4” (603)

4-15/16”

(125)

Metric Dimensions are in Millimeters

Nominal Inlet O. D.

Model Inlet Size (Dim. B)

SJAB 2406 6” (152) 5-7/8” (149) SJAB 2407 7” (178) 6-7/8” (175) SJAB 2408 8” (203) 7-7/8” (200) SJAB 2410 10” (254) 9-7/8” (251) SJAB 2412 12” (305) 11-7/8” (302) SJAB 2414 14” (356) 13-7/8” (352)

Notes:

1. The core is easily removable b y compressing the loc king spring

and rotating the core counter clock-wise.

2. Adjustment between horizontal and vertical discharge is done by adjusting the pattern deflectors from flush with the cone to horizontal (parallel to the floor).

3. To gain access for damper adjustment, remove the center plug on the center cone of the core.

4. The standard finish is electrocoat acrylic baked enamel. Other finishes are available on request.

5. The standard color is #11 bright white. Other colors are available upon request.

6. Perf orated material is 21% free area on sizes 5-10, and 51% on sizes 12-14.

7. Inlet is 1/8” (3) undersized to fit into the duct.

4-1/8” (105)

1-1/4” (32)

Horizontal Discharge

Vertical

Discharge