Carnes SFPA 2414 User Manual

Imperial [IP] Dimensions

Metric (SI) in Parentheses

SPECIFICATION SHEET

MODEL SFPA

PLAQUE DIFFUSER

Donn®Fineline®T-BAR LAY IN

CARNES COMPANY, 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone (608) 845.6411 Fax: (608 ) 845.6470 carnes@carnes.com

12009

DIMENSIONS LISTED IN INCHES (In Millimeters)

Nominal

Model Duct Size

Number Dia. A B C D E F

SFPA 2406 6 (152) 23-3/4 (603) 23-3/8 (594) 5-7/8 (149) 17-5/8 (448) 3-7/8 (98) 3-1/2 (89) SFPA 2408 8 (203) 23-3/4 (603) 23-3/8 (594) 7-7/8 (200) 17-5/8 (448) 3-7/8 (98) 3-1/2 (89) SFPA 2410 10 (254) 23-3/4 (603) 23-3/8 (594) 9-7/8 (251) 17-5/8 (448) 3-7/8 (98) 3-1/2 (89) SFPA 2412 12 (305) 23-3/4 (603) 23-3/8 (594) 11-7/8 (302) 17-5/8 (448) 3-7/8 (98) 3-1/2 (89) SFPA 2414 14 (356) 23-3/4 (603) 23-3/8 (594) 13-7/8 (352) 17-5/8 (448) 3-7/8 (98) 3-1/2 (89) SFPA 2416 16 (406) 23-3/4 (603) 23-3/8 (594) 15-7/8 (400) 17-5/8 (448) 3-7/8 (98) 3-1/2 (89)

NOTES: 1. The core is easily removable by compressing the locking spring and rotating the core counter-clockwise.

2. The standard finish is electrocoat baked enamel. Other finishes are available upon request.

3. The standard color is #11 Bright White. Other colors available on request.

4. Inlet is undersized by 1/8” (3) to fit into the duct.

5. To mount this diffuser in a plaster ceiling, use KXFA Auxiliary Frame.

6. Construction is steel.

7. Unit is shipped completely assembled.

8. Metric dimenions are in millimeters.

1-1/4” (32)

3/8”

.313

PANEL MOUNTING DETAIL