Carnes SFPA 1106 User Manual

SPECIFICATION SHEET

Model SFPA

Plaque Diffuser

T-Bar Lay In

SUPERSEDES 12003-D, 12005-A 12003-E

DIMENSIONS LISTED IN INCHES (In Millimeters)

Nominal

Model Duct Size

Number Dia. A B C D E F

SFPA 1106 6 (152) 11-3/4 (298) 11-3/4 (298) 5-7/8 (149) 9 (229) 3-7/16 (87) 3 (76) SFPA 1108 8 (203) 11-3/4 (298) 11-3/4 (298) 7-7/8 (200) 9 (229) 3-7/16 (87) 3 (76) SFPA 2406 6 (152) 23-3/4 (603) 23-3/4 (603) 5-7/8 (149) 17-5/8 (448) 3-7/8 (98) 3-1/2 (89) SFPA 2408 8 (203) 23-3/4 (603) 23-3/4 (603) 7-7/8 (200) 17-5/8 (448) 3-7/8 (98) 3-1/2 (89) SFPA 2410 10 (254) 23-3/4 (603) 23-3/4 (603) 9-7/8 (251) 17-5/8 (448) 3-7/8 (98) 3-1/2 (89) SFPA 2412 12 (305) 23-3/4 (603) 23-3/4 (603) 11-7/8 (302) 17-5/8 (448) 3-7/8 (98) 3-1/2 (89) SFPA 2414 14 (356) 23-3/4 (603) 23-3/4 (603) 13-7/8 (352) 17-5/8 (448) 3-7/8 (98) 3-1/2 (89) SFPA 2416 16 (406) 23-3/4 (603) 23-3/4 (603) 15-7/8 (400) 17-5/8 (448) 3-7/8 (98) 3-1/2 (89)

NOTES: 1. The core is easily removable by compressing the locking spring and rotating the core counter-clockwise.

2. The standard finish is electrocoat baked enamel. Other finishes are available upon request.

3. The standard color is #11 Bright White. Other colors available on request.

4. Inlet is undersized by 1/8” (3) to fit into the duct.

5. To mount this diffuser in a plaster ceiling, use KXFA Auxiliary Frame.

6. Construction is steel.

7. Unit is shipped completely assembled.

8. Metric dimenions are in millimeters.

1-1/4” (32)

Imperial [IP] Dimensions

Metric (SI) in Parentheses

CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: (608)845-6411 Fax: (608)845-6504 www.carnes.com