Carnes SFAB 2407 User Manual

CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: [phone] Fax: [phone] www.carnes.com

COPYRIGHT © 2012 CARNES COMPANY

ALL RIGHTS RESERVED

SUPERSEDES 12001-D 12001-E

SPECIFICATION SHEET

Models SFTB and SFAB

Round Neck Stamped Louvered Diffuser

24” x 24” T-Bar Lay In

Nominal

Duct Size

Model Number (Dia. In.) A B

SFAB/SFTB 2406 6 (152) 23-3/4 (603) 5-7/8 (149)
SFAB/SFTB 2407 7 (178) 23-3/4 (603) 6-7/8 (175)
SFAB/SFTB 2408 8 (203) 23-3/4 (603) 7-7/8 (200)
SFAB/SFTB 2410 10 (254) 23-3/4 (603) 9-7/8 (251)
SFAB/SFTB 2412 12 (305) 23-3/4 (603) 11-7/8 (302)
SFAB/SFTB 2414 14 (356) 23-3/4 (603) 13-7/8 (352)
SFAB/SFTB 2416 16 (406) 23-3/4 (603) 15-7/8 (403)

NOTES:

1. The inner assembly is easily removable by disengaging the spring lock and rotating counter clockwise.

2. To gain access for damper adjustment, remove the plug button on the center cone.

3. To surface mount this diffuser, use Carnes Model KXFA Auxiliary Frame.

4. Standard finish is #11 Bright White Electrocoat Enamel. Other finishes available upon request.

5. Metric (SI) dimensions are given in millimeters.

6. Construction of model SFTB is steel.

7. Construction of model SFAB is aluminum.

A

B

Dia.

Outside

A

4-3/16”

1-5/16”

3-17/32”

21/32”

Imperial [IP] Dimensions

Metric (SI) in Parentheses