Carnes SFAB User Manual

SPECIFICATION SHEET

Models SFTB and SFAB

Round Neck Stamped Louvered Diffuser

24” x 24” Donn®FineLine®T-Bar Lay In

SUPERCEDES 12008-A 12008-B

Nominal

Duct Size

Model Number (Dia. In.) A B

SFAB/SFTB 2D06 6 (152) 23-3/4 (603) 5-7/8 (149) SFAB/SFTB 2D07 7 (178) 23-3/4 (603) 6-7/8 (175) SFAB/SFTB 2D08 8 (203) 23-3/4 (603) 7-7/8 (200) SFAB/SFTB 2D10 10 (254) 23-3/4 (603) 9-7/8 (251) SFAB/SFTB 2D12 12 (305) 23-3/4 (603) 11-7/8 (302) SFAB/SFTB 2D14 14 (356) 23-3/4 (603) 13-7/8 (352) SFAB/SFTB 2D16 16 (406) 23-3/4 (603) 15-7/8 (403)

NOTES:

1. The inner assembly is easily removable by disengaging the spring lock and rotating counter clockwise.

2. To gain access for damper adjustment, remove the plug button on the center cone.

3. To surface mount this diffuser, use Carnes Model KXFA Auxiliary Frame.

4. Standard finish is #11 Bright White Electrocoat Enamel. Other finishes available upon request.

5. Metric (SI) dimensions are given in millimeters.

6. Construction of model SFTB is steel.

7. Construction of model SFAB is aluminum.

Dia.

Outside

4-3/16”

1-5/16”

3-17/32”

23-3/8”

3/8”

.313

PANEL MOUNTING DETAIL

Imperial [IP] Dimensions

Metric (SI) in Parentheses

CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: (608)845-6411 Fax: (608)845-6504 www.carnes.com