Carnes RSRBH User Manual

Imperial [IP] Dimensions

Metric (SI) in Parentheses

SPECIFICATION SHEET

MODELS RSRB, RTRB (STEEL)

0° FIXED DEFLECTION RETURN

GRILLES & REGISTERS

CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: (608)845-6411 Fax: (608)845-6470 www.carnes.com

SUPERSEDES 14095-G 14095-H

Notes:

1. Standard screws are #6 x 1-1/4” (32) phillips trusshead screws.

2. Polyurethane foam gasket around edge of frame is available on request.

3. The standard finish is electrocoat acrylic baked enamel. Other finishes available on request.

4. The standard color is #11 Bright White. Other colors are available on request.

5. Blades can be aligned either horizontally or vertically, and are fixed at 0° deflection.

6. Center mullion is used for blade lengths exceeding 24” (610) nominal size in either dimension on steel models RSRB and RTRB.

7. Standard sizing is in even inch increments in both dimensions. Odd inch and fractional sizing [in 1/8” (3) increments] is available on request.

8. This product is covered by U.S. Patent #5,771,647.

9. Damper construction is electrogalvanized steel.

10. The standard operator on the damper takes a medium size flat-blade screwdriver.

11. Maximum size shown is the maximum single panel size. Panels can be joined for larger sizes.

12. Metric dimensions are given in millimeters.

Blade Minimum Maximum

Model Construction Damper Alignment W x H W x H

RSRBH Steel No Horizontal RSRBV Steel No Vertical 4” x 4” 36” x 36” RTRBH Steel Yes Horizontal (102 x 102) (914 x 914) RTRBV Steel Yes Vertical