Carnes RSLAH User Manual
COPYRIGHT © 2012 CARNES COMPANY
ALL RIGHTS RESERVED
SUPERSEDES 14096-H
14096-I
SPECIFICATION SHEET
Models RSLA (Grille), RTLA (Register)
Steel Louvered Face Return Grilles & Registers
Blade Minimum Maximum
Model Damper Alignment W x H W x H
RSLAH No Horizontal 48” x 36” (1219 x 914)
RSLAV No Vertical
4” x 4” (102 x 102)
36” x 48” (914 x 1219)
RTLAH Yes Horizontal 48” x 36” (1219 x 914)
RTLAV Yes Vertical 36” x 48” (914 x 1219)
Notes
1. Standard screws are #6 x 1-1/4” (32) phillips trusshead screws.
2. The standard finish is electrocoat acrylic baked enamel. Other finishes are available on request.
3. The standard color is #11 Bright White. Other colors are available on request.
4. Louvers can be aligned either horizontally or vertically.
5. Louver edges are hemmed for extra strength and safety.
6. Standard sizing is in even inch increments in both dimensions.
7. Odd inch and fractional sizing (in 1/8” increments) is available on request.
8. Damper construction is electrogalvanized steel.
9. The standard operator on the damper takes a medium size flat-blade screwdriver.
10. Maximum size shown is the maximum single panel size. Panels can be joined for larger sizes.
11. Metric dimensions are given in millimeters.
Nom.
Size
-1/2”
(13)
Nom.
Size
2”
(51)
5/32” (4)
1-1/4” (32)
Nom. Size +2” (51)
1-3/8” (35)
2-9/16” (65)
Grille
Model RSLA
Register
Model RTLA
Imperial [IP] Dimensions
Metric (SI) in Parentheses
CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: (608)845-6411 Fax: (608)845-6504 www.carnes.com
Nom.
Duct Height
2/3” (17)
Size - 1/2 (13)
1” (25)
Loading...