Carnes RSEAH User Manual

SUPERSEDES 14097-H

14097-I

CARNES COMPANY, 448 S.Main St., P.O.Box 930040, Verona, WI. 53593-0040 Phone: 608/845-6411 Fax: 608/845-6470 E-Mail: carnes@carnes.com www.carnes.com

Models RSEA, RSHA, RTEA, RTHA

Sturdicore™ Heavy Duty Return Grilles & Registers

Steel, 0° and 40° Fixed Deflection

SPECIFICATION SHEET

IP [English] Dimensions

SI (Metric) In Parentheses

Nominal

Height

- 1/2” (13)

Nominal

Height

+ 2” (51)

Nominal Width + 2” (51)

Nominal Width - 1/2” (3)

1-5/16” (33)

2-5/8” (67)

2-7/8” (73)

1-9/16” (40)

Notes:

1. Frame is made of 18 gauge formed steel.

2. Blades are made of 10 gauge rounded steel bars.

3. Blade supports are made of 14 gauge steel.

4. Blade supports are on 6” (152) centers.

5. Minimum size available is 6” x 4” (152 x 102).

6. Maximum single panel size is 72” x 48” (1829 x 1219), assuming blades are parallel to the long dimension.

7. Sizes larger than 72” x 48” (1829 x 1219) can be furnished by joining single units together.

8. Standard color is #11 Bright White. Other colors are available upon request.

9. Standard finish is electrocoat acrylic baked enamel. Other finishes are available upon request.

10. Recommended duct opening is Nominal Size.

11. Screws provided are #8 x 1-1/4” (32) countersunk Phillips head.

12. Screw holes are countersunk for flush appearance.

Blade Blade Available Sizes

Model Setting Alignment Damper Minimum WxH Maximum WxH

RSHAH 40° Horizontal No 6” x 4” (152 x 102) 72” x 48” (1829 x 1219)

RSHAV 40° Vertical No 6” x 4” (152 x 102) 48” x 72” (1219 x 1829) RSEAH 0° Horizontal No 6” x 4” (152 x 102) 72” x 48” (1829 x 1219) RSEAV 0° Vertical No 6” x 4” (152 x 102) 48”x 72” (1219 x 1829 RTHAH 40° Horizontal Yes 6” x 4” (152 x 102) 72” x 48” (1829 x 1219) RTHAV 40° Vertical Yes 6” x 4” (152 x 102) 48” x 72” (1219 x 1829) RTEAH 0° Horizontal Yes 6” x 4” (152 x 102) 72”x 48” (1829 x 1219) RTEAV 0° Vertical Yes 6” x 4” (152 x 102) 48” x 72” (1219 x 1829)

Model

RSE

Model

RSH

40°