Carlyle Tools CL801 Owner's Manual
0099001994-00
PLEASE SAVE THIS OWNER’S MANUAL AND READ BEFORE EACH USE.
This manual will explain how to use the work light safely and effectively
.
Please read and follow these instructions and precautions carefully.
POR FAVOR GUARDE ESTE MANUAL DEL PROPIETARIO Y LEER ANTES DE
CADA USO. En este manual le explica cómo utilizar la luz de trabajo de manera
segura y conable. Por favor, lea y siga las siguientes instrucciones y precauciones.
ESSAYER DE GARDER LE MANUEL D’INSTRUCTIONS ET LE LIRE AVANT
CHAQUE UTILISATION. Ce manuel explique comment utiliser l’unité d’une façon
sûre et efcace. S’il vous plaît lisez et suivez ces instructions et précautions.
MODEL / MODELO / MODÈLE :
CL801
15W COB LED
Under-the-Hood Work Light
Luz de trabajo bajo el capó
LED COB de 15 W
Lumière de travail sous le capot
LED COB de 15 W
OWNER’S MANUAL
MANUAL DEL USUARIO
MANUEL D’UTILISATION
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .......................................................................... 4
PERSONAL SAFETY PRECAUTIONS ............................................................................ 4
SETUP INSTRUCTIONS .................................................................................................. 4
FEATURES ....................................................................................................................... 5
CHARGING ....................................................................................................................... 5
OPERATING INSTRUCTIONS ......................................................................................... 5
MAINTENANCE INSTRUCTIONS ................................................................................... 5
STORAGE INSTRUCTIONS ............................................................................................6
TROUBLESHOOTING ...................................................................................................... 6
BEFORE RETURNING FOR REPAIRS ...........................................................................6
SPECIFICATIONS ............................................................................................................ 6
REPLACEMENT PARTS ..................................................................................................6
LIMITED WARRANTY ...................................................................................................... 6
CONTENIDOS
INSTRUCCIONES IMPORTANTES DE SEGURIDAD ....................................................8
PRECAUCIONES DE SEGURIDAD PERSONAL............................................................ 8
INSTRUCCIONES DE INSTALACIÓN ............................................................................. 9
CARACTERÍSTICAS ........................................................................................................ 9
CARGANDO...................................................................................................................... 9
INSTRUCCIONES DE OPERACIÓN ...............................................................................9
INSTRUCCIONES DE MANTENIMIENTO.....................................................................10
INSTRUCCIONES DE ALMACENAMIENTO ................................................................. 10
RESOLUCIÓN DE PROBLEMAS ..................................................................................10
ANTES DE DEVOLVER A REPARACIONES .................................................................10
ESPECIFICACIONES ..................................................................................................... 10
REPUESTOS ..................................................................................................................10
GARANTÍA LIMITADA ..................................................................................................... 11
TABLE DES MATIÈRES
CONSIGNES DE SÉCURITÉ IMPORTANTES .............................................................. 12
MESURES DE SÉCURITÉ PERSONNELLE ................................................................. 12
DIRECTIVES DE CONFIGURATION ............................................................................. 13
CARACTÉRISTIQUES ...................................................................................................13
CHARGE ......................................................................................................................... 13
CONSIGNES D’UTILISATION ........................................................................................ 13
CONSIGNES D’ENTRETIEN .........................................................................................14
INSTRUCTIONS DE STOCKAGE .................................................................................. 14
TABLEAU DE DÉPANNAGE ..........................................................................................14
AVANT DE RETOURNER POUR LES RÉPARATIONS ................................................14
SPÉCIFICATIONS ..........................................................................................................14
PIÈCES DE RECHANGE ..............................................................................................14
GARANTIE LIMITÉE ....................................................................................................... 15
• 4 •
1. IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS.
1.1 SAVE THESE INSTRUCTIONS –
This manual contains important safety
and operating instructions.
1.2 Read, understand and follow all
instructions, cautions and warnings
listed in this manual. Failure to follow all
instructions and abide by all cautions and
warnings could result in personal injury,
injury to others and property damage.
1.3 IMPORTANT! CHARGE WORK LIGHT
IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST
EVERY 3-6 MONTHS.
1.4 DO NOT turn on the work light while it is
being charged.
1.5 DO NOT handle or move the work light
while it is being charged.
1.6 DO NOT cover or block the lenses
during use.
1.7 DO NOT look directly into the light or
shine the light directly into the eyes of any
person or animal.
1.8 DO NOT allow children to use the work light.
1.9 DO NOT operate the work light if it has
received a sharp blow, been dropped, or
otherwise damaged in any way; take it to
a qualied service person.
1.10 DO NOT leave the battery in a
discharged state.
1.11 WARNING! Do not use any other charger
except the one provided to charge the
internal battery. Use of a charger not
supplied by the work light manufacturer may
result in a risk of re, injury to persons and/
or damage to property.
1.12 DO NOT use the work light with a charger
which has a damaged cord or plug.
Replace the cord or plug immediately.
1.13 IMPORTANT! Make sure the voltage
marked on the charger plug is the same
as the work light.
1.14 To reduce the risk of damage to the
charger plug, pull by the plug, rather than
the cord when disconnecting the charger.
1.15 DO NOT use the provided charger to
charge or power any other electrical item.
1.16 DO NOT immerse the work light in water.
1.17 AC CHARGER FOR INDOOR USE ONLY.
DO NOT expose the AC charger to water
or use in damp conditions.
1.18 Ensure the work light is unplugged and
allowed to cool before attempting any
cleaning or replacement.
2. PERSONAL SAFETY PRECAUTIONS
WARNING! TO REDUCE THE RISK OF
BURNS OR FIRE, FOLLOW THESE
SAFETY PRECAUTIONS:
2.1 DO NOT open or disassemble the work
light; take it to a qualied service person
when service or repair is required. Incorrect
reassembly may result in a risk of re.
2.2 DO NOT crush, puncture, short external
contacts or dispose of in re or water.
2.3 DO NOT expose to temperatures above
140°F (60°C).
2.4 Recycle or dispose of the used battery
as required by local regulations. DO NOT
dispose of with household waste.
2.5 If the electrolyte in the cells gets on
your skin, wash thoroughly with soap
and water. If it gets into your eyes, rinse
thoroughly with cool water and seek
immediate medical attention.
2.6 This product contains a lithium ion
battery. In case of re, you may use
water, a foam extinguisher, Halon,
CO2, ABC dry chemical, powdered
graphite, copper powder or soda (sodium
carbonate) to extinguish the re. Once
the re is extinguished, douse the
product with water, an aqueous-based
extinguishing agent, or other nonalcoholic
liquids to cool the product and prevent the
battery from re-igniting. NEVER attempt
to pick up or move a hot, smoking, or
burning product, as you may be injured.
3. SETUP INSTRUCTIONS
3.1 Remove any cord wraps and uncoil
the cable between the charger and the
work light.
3.2 Use the hooks to attach the work light to
the underside of the car hood.
• 5 •
4. FEATURES
5 4 3
1
2
1. Hooks for mounting
2. (3) COB LEDs
3. Power level button
4. Charging port
5. Battery status LEDs
Not shown:
• 100-240V AC wall charger
with USB port
• Micro USB to USB
charging cable
5. CHARGING
IMPORTANT! CHARGE THE WORK
LIGHT IMMEDIATELY AFTER
PURCHASE, AFTER EACH USE, AND
AT LEAST EVERY 3-6 MONTHS.
Failure to do this will reduce the battery’s
capacity and may void the warranty.
5.1 Before charging, make sure the work light
is turned off.
5.2 Connect the micro USB end of the charging
cable to the micro USB port on the work
light. Insert the USB end of the cable into
the USB port on the wall charger.
5.3 Plug the AC charger into a live AC outlet.
The green LEDs will light, to indicate
battery status.
5.4 Charging will take 7-8 hours.When the
battery is fully charged, all four LEDs
will be lit.
5.5 When fully charged, unplug the charger
from the AC outlet, and then from the work
light. The work light is now ready for use.
5.6 Recharge the work light after use, and at
least every 3-6 months.
6. OPERATING INSTRUCTIONS
6.1 IMPORTANT:
Charge the internal battery before use.
6.2 Press the Power Level button on the front
of the unit:
1x – turns on one (center) light
2x – turns on two lights
3x – turns on all three lights
4x – turns all lights off
The position of each individual light may be
rotated, for more precise positioning.
7. MAINTENANCE INSTRUCTIONS
7.1 After use and before performing
maintenance, unplug and disconnect
the work light.
7.2 Ensure the work light is unplugged and
allowed to cool before attempting any
cleaning.
7.3 Any servicing should be performed by
qualied service personnel.
Loading...