Carlton CF1W Service Manual

- Page 1 of 27 -

CF1W

Dishwasher

Service Manual

Models:

CF1W

l Features

l Overflow Protection Function
l Good measures for Avoiding Noise
l Water Softener for Descaling
l Super-Capacity for 12 settings

Haier Group

Manual code: Edition:2004.11.23

- Page 2 of 27 -

Contents

1.Features ............................................................................................................................................3

2.Speciafications .................................................................................................................................4

3. Safety Precaution............................................................................................................................6

4.Net dimension ...................................................................................................................................7

5.Installation and Accessory Parts....................................................................................................7

6.Parts and Functions.........................................................................................................................8

7.Function Schedule .........................................................................................................................11

8.Program Diagram..........................................................................................................................12

9.Maintenances Service and Trouble Shooting...........................................................................13

10. Circuit Diagram..........................................................................................................................19

11.Exploded View.............................................................................................................................20

12.List of Parts..................................................................................................................................21

13.Damageable Parts List...............................................................................................................26

- Page 3 of 27 -

Features

1.Features

1.1 Easy control and varies of washing mode

This model adopts mechanical controling structure, with a integrated knob, so varies of

washing programs are available for selection by turning the knob.

1.2Prewashing

It may avild the peak of using electricity effectively, saving electricity consumption.

1.3 Overf low Protection Function

- Page 4 of 27 -

Specifications

2.Speciafications

DISH WASHER FREE STANDING

Last update 2003-2-10 2004-1-10
Revision 00.01 00.01

Supplier Type N°. CF1W
Suppliers bar code N°. EAN
Sales Brand / Model GXCH
Sales bar code N°. EAN

Key-features
Energy efficiency Class B

Washing efficiency Class B
Drying efficiency Class B
Noise level power / pressure dB(A) 55/­Energy consumption* kWh / y 449
　 KWh / 24h 1.25
Water consumption* l 18
Duration of programme (Based on 65° normal prog. ) mins. 137
Place settings (international standard) 12
Programs n°. 5

Programme selection single dial / electronic l/ -
Washing temperatures °C 50/65
Spray levels n°. 4
Certification's (CE / LGA / ISO 9001 / ISO 9002) CE / GS /EMC / ISO 9001

Technical equipment

Work top / -removable - /l
Decor frame / optional l/l
Water heating element hidden / open - /l
Refill spy -lamps salt / rinse aid - / ­Program progress indicator LED / visual - / ­Inner door S= stainless steel / P= plastic S
Interior S= stainless steel / P= plastic S
Dispenser system Detergent / Rinse aid l /l
Water softening system / n°. of water hardness levels l/4
Easy clean filter system / self cleaning micro filter l /-
Upper Basket Full load adjustable / Height adjustable

- /l

Lower Basket Folding/Not folding - /l
Plates sizes bottom basket / uper basket cm 19-26/14
Water inlet hose cold water / hot water l/-
Water drain hose / -hose support l /l
Drying system Condenser / Turbo vented Naturul

- Page 5 of 27 -

Specifications

Height adjustable feet n°. / max. mm 　 4/20
Delay timer (from - to) h -

Safety systems 　 　

Child resistant door lock CDL ­Anti flood system AFS

l

Waterproof anti leak system ALS

l

Water return protection WRP

l

Acqua Stop kit ­Programs 　 　

Normal C° 50
Intensive C° 50
Economic C° ­Delicate or Light wash C° ­Rinse C° 65
Glasses C° 50
Rapid C° ­Pre-wash (soak) C° Cold water
Strong C° -

Technical data 　 　

Voltage/frequency V/Hz 230V~50Hz
Nominal power W 2100
Main fuse (intensity) A 13

Product dimensions 　 　

Unit dimensions (H x W x D) cm 85X60X60
Net weight kg 43
Requested measures of niche (H x W x D) ­Dimensions of door panel (H x W) ­Dimensions of packing (H x W x D) cm 88X66X67.5
Weight of packing (all materials) kg 48
40' Container load capacity pcs ­40' HC load capacity pcs 162

Packing materials / Recycling symbols RS REzY

Carton (weight) g 4,600
Polistyren (weight) g 1,518
Polyetylene foil (weight) g 65
Other packing materials (weight) g 55
Wood (weight) kg 0.15

Delivery Time of First Batch 　 Oct. 2004

- Page 6 of 27 -

Safety Precaution

3. Safety Precaution

IMPORTANT

Carefully read the instructions contained in this manual, as it provides information that is essential to

safe and proper installation, use and maintenance of this appliance.
This appliance complies with following EEC directives:

-73/23/EEC of 19/02/73(Low Voltage)and subsequent modifications;

- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications.

- Carefully dispose of the packing material.

- After removing the packing, check to make sure that the appliance is not damaged. If in doubt,
contact a qualified professional.

- The dishwasher must only be used by adults for the washing of household dishes and cooking
utensils.

- Fundamental rules to follow when using the appliance:

* Never touch the dishwasher with wet hands;
* We discourage the use of extension cords and multiple sockets;
* During installation, the power supply cord must not be excessively or dangerously bent or

flattened;

* If the appliance is not operating properly or requires maintenance, disconnect the appliance

from the power supply.

- Keep detergents out of the reach of children. Also keep children away from the dishwasher
when it is open to reduce the risk of injury.

- This appliance cannot be installed outdoors, not even if the area in which it is installed is
covered by a roof. It is also very dangerous to leave it exposed to the rain and elements.

- Do not touch the heating element during or after a wash cycle.

- Do not lean or sit on the door when it is open, as this could overturn the dishwasher.

- If the appliance malfunctions, turn off water supply to the appliance and disconnect the plug
from the wall socket. Then, refer to the "Troubleshooting" section on page 9.If you cannot
resolve the problem, contact an authorised service agent.

- Only specialised personnel are authorised to make repairs.

- Appliances which are being discarded must be made inoperable by cutting the power supply
cord and removing the door lock.

- The appliance must be positioned so that the plug is accessible.

- If installing this dishwasher on a carpeted floor, ensure the car pet does not obstruct the
opening.

- If the supply cord is damaged, it must be replaced by the manufacturer or an authorised service
agent.

- Always load the dishwasher as detailed in this instruction manual, loading knives and other
utensils with sharp points with their points placed down or in a horizontal position.

- When connecting the appliance to the water mains always discard any old hose-sets and use
new ones.

- When not in use, keep the door of your dishwasher slightly ajar to allow air circulation however
to prevent danger of tripping never leave the door down.

- Page 7 of 27 -

Net dimension / Installation and Accessory Parts

4.Net dimension

5.Installation and Accessory Parts

5.1 Positioning the Appliance

Positioning the appliance in the desired location. The back should rest against the wall behind it, and
the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain
hoses that can be positioned to the right or the left to facilitate proper installation.

5.2 Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the dishwasher,
making it level. In any case, the appliance should not be inclined more than 2 . If the appliance is level, it
will help ensure proper performance.

5.3 Cold Water Connection

Connect the cold water supply hose to a threaded 3/4 (gas) connector and make sure that it is
fastened tightly in place (see fig. 1). If the water pipes are new or have not been used for an extended
period of time, let the water run to make sure that the water is clear and free of impurities. If this
precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

5.4 Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised
system, heating system), as long as it does not exceed a temperature of 60. In this case, the wash cycle
time will be shortened by about 15 minutes and the wash efficiency slightly reduced. The connection must

- Page 8 of 27 -

Installation and Accessory Parts / Parts and Functions

be made to the hot water line following the same procedures as those for the connection to the cold water
line.

5.5 Drain Hose Connection

Insert the drain hose into a drain pipe with a minimum diameter of 4cm, Or let it run into the sink,
making sure to avoid bending or crimping it. Use the speical plastic support that comes with the appliance
(see fig.2). The free end of the hose must be at a height between 40 and 100 cm and must not be
immersed in water.

Attention:

The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from

moving and allowing water to spill outside the drain.

5.6 Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to
those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical
system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which
is earthed properly (the earthing of the appliance is a safety requirement mandated by law).

If the electrical socket to which the appliance must be connected is not appropriate for the plug,
replace the plug, rather than using adaptors or the like as they could cause overheating and burns.

6.Parts and Functions

6.1 Parts

A ON-OFF Light
B ON-OFF Button
C Handle For Opening Door

D Knob For Selecting Cycle
E Program Symbols

- Page 9 of 27 -

Parts and Functions

6.2 Functions

Salt

The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the
dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate
lime and minerals from the water.

Loading the Salt into the Softener

Always use salt intended for use with dishwashers. The salt container is located beneath the lower rack and should
be filled as follows:

- Remove the lower rack and then unscrew and remove the cap from the salt

container;

- If you are filling the container for the first time, fill it with water;

- Place the end of the funnel (supplied) into the hole and introduce about 2
kg of salt. It is normal for a small amount of water to come out of the salt
container.

- Carefully screw the cap back on.

To prevent the formation of rust, load the salt just before beginning a wash

cycle.

Adjusting Salt Consumption

The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of the water

used. This is intended to optimise and customise the level of salt consumption so that it remains at a minimum.

To adjust salt consumption, proceed as follows:

- Unscrew the cap from the salt container;

- There is a ring on the container with an arrow on it (see figure to the side).

- If necessary, rotate the ring in the anticlockwise direction from the "-" setting towards the

"+" sign, based on the hardness of the water being used.

It is recommended that adjustments be made in accordance with

the following scheme:

Detergent

Detergent specifically intended for use with dishwashers must be used. The
dispenser must be refilled before the start of each wash cycle following the
instructions provided in the "Wash Cycle Table". The detergent dispenser is
located on the inside panel the door.