Carlsbro CMW20 User Manual

CMW20

USER GUIDE

Thank you for buying the Carlsbro CMW10 microphone. Correctly
used it will provide you with years of reliable service and fulfil all your
performance needs.

SPECIFICATIONS:

1. Frequency response 75Hz - 14000Hz

2. Sensitivity 72dB

3. Impedance 600 30% (at 1KHz)

4. Uni-Directional directivity (dynamic)

5. Operating temperature -60 C - 70 C

Frequency Response

± 3dB

±W

°°

OPERATION

First connect the supplied XLR cable to the base of the microphone,
next connect the male end to unit the microphone is being connected to.
Make sure that the amplifier that is being used is set to its minimum
position before turning the on, then gradually increase the volume until
the desired levelis achieved.

NOTE:

being used with as the resulting feedback can permanently damage the
equipment and thehearing of people in thesurrounding area.
Always store any use the microphone away from moisture and areas of
high humidity.

Never pointthe microphone directlyat the loudspeakers it is

CONTENTS

Microphone Guarantee Card
User Guide XLR to XLR Cable
Zipped Case Microphone Stand Clip