Carlo Gavazzi SPD 100W Bi-Phase Data Sheet
Approvals
1 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. - 0940
Model
Mounting ( D = Din rail )
Output voltage
Output power
Input type
Input type:
2= single phase high voltage (bi-phase)
Output Performances
• Installation on DIN Rail 7.5 or 15mm
• Short circuit protection
• Input single phase 340 to 575VAC
• Passive PFC
• Power ready output on 24VDC
• LED indicator for DC power ON
• LED indicator for DC low
• Standard parallel function
• Very compact dimensions
• UL, cUL listed and TUV/CE approved
• Class I div2 certification (in progress)
Product De scrip tion
This particular SPD is the
most compact 100W power
supply on the market. Relay
output for “power ready”
parallel function and PFC are
included. Performances are
unique with high efficiencies
and the possibility of being
used up to 70°C with a little
derating. Furthermore it can
be powered with 2 phases of
a 3 phase grid system due to
its high voltage input.
Switching Power Supply
Type SPD 100W Bi-Phase
DIN rail mounting
Output voltage accuracy
-0 +1% max (factory adjusted)
Line regulation ± 1%
Load regulation
Non parallel model ± 1%
Parallel model ± 5%
Temp. coefficient ± 0.03% / °C
Ripple and noise 50mV
Vi nom, Io nom, BW=20MHz
Rated continuous Loading
8.4A @ 12VDC / 6.9A @14.5VDC
4.2A @ 24VDC / 3.5A @ 28.5VDC
2.1A @ 48VDC / 1.8A @ 56VDC
Fall Time 150ms
Transient recovery time
Vi nom, Io= 0.5 x Inom 2ms
Turn On Time
Vi nom, Io nom
1.0s
Vi nom, Io nom with Capacitor load
1.5s
Output Data
Ordering Key
SP D 24 100 2
Rise Time
Vi nom, Io nom
150ms
Vi nom, Io nom with Capacitor load
500ms
Capacitor Load
12V, 24V versions 7000µF
48V version 3500µF
Reverse Voltage Immunity
12V 18V
24V 35V
48V 63V
Hold up Time Vi nom Io max
20ms
Minimum load Vi nom 0%
Parallel Operation 2 units max.
0.1 Io min~0.9 Io max
Model
Rated output
Voltage
(VDC)
Output
Power
(W)
Output
Current (A)
Voltage Trim Range
0.8 Io nom
DC ON LED (VDC)
Threshold at startup
DC LO LED (VDC)
Threshold after startup
Typical
Efficiency
Min. VDC Max. VDC Min. Max. Min. Max.
SPD12100
12 100.8 8.4 11.4 14.5 10 11.2 10 11.2 86%
SPD24100
24 100.8 4.2 22.5 28.5 17.6 19.4 17.6 19.4 87%
SPD48100
48 100.8 2.1 47.0 56.0 37.0 43.0 37.0 43.0 89%
g
t
e
r
p
a
r
u
ü
a
f
t
B
Rheinland
Product Safety
T
d
y
e
p
v
e
o
r
a
p
p
0940 - Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 2
Rated input voltage 400/500VAC
Voltage range
AC in 340 - 575VAC
DC in 480 - 820VDC
Rated input current 0.48A / 0.75A
Power dissipation
12V 15.0W
24V 13.0W
48V 10.5W
Input Data
Input Fuse 2A/600VAC internal
1)
Output Short Circuit current limit
Rated Overload Protection 115 - 135%
Over voltage protection (auto recovery)
12V model 14.5V to 17.4V
24V model 30.0V to 33.0V
48V model 60.0V to 66.0V
Controls and Protections
Ambient temperature -25°C to 71°C
Derating (>61°C to +71°C) 2.5% / °C
Ambient humidity 20 to 95%RH
Storage -25°C to +85°C
Pollution degree 2
Protection degree IP20
Cooling Free air convection
Switching frequency 45kHz
General Data (@ nominal line, full load, 25°C )
Insulation voltage
Input / Output 3.000VAC / 4242VDC
Input / FG 1500VAC / 2121VDC
Insulation resistance 100MΩ min
Shock resistance acc. to IEC 60068-2-27
(15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face)
Vibration resistance acc. to IEC 60068-2-6
(Mounting by rail: 10-500 Hz, 2G, along
X, Y, Z each Axis, 60 min for each Axis)
UL / cUL UL 508 Listed
UL 60950-1,
Recognized ISA 12.12.01
(Class I, Division 2, Groups
A, B, C and D in progress)
TUV EN 60950-1,
CB scheme
EN 61558-1,
EN 61558-2-17 (acc.to EN 60204)
Approvals and EMC
1)
Fuse not replaceable by user
Frequency range 47 - 63Hz
Internal Voltage Surge Protection
Varistor
(acc. to IEC61000-4-5)
Leakage Current
Input / Output 0.25mA
Input / FG 3.5mA
Inrush current 10A
P. F.C. 0.55
Input Voltage Surge Protection
Varistor
Power ready (only SPD241002)
Threshold at start up
Min. 17.6VDC - Max.19.4VDC
(contact closed)
Contact rating at 60VDC 0.3A
Insulation 500VDC
MTBF (Bellcore Issue 6@40°C), GB
12V model 622.000h
24V model 661.000h
48V model 672.000h
Altitude during operation 3.000m
Case material Plastic
Dimensions L x W x D 90 x 54 x 114mm
Weight 500g
CE EN 61000-6-3,
EN 55022 Class B,
EN 61000-3-2, EN 61000-3-3
EN 61000-6-2, EN 55024,
EN 61000-4-2 Level 4,
EN 61000-4-3 Level 3
EN 61000-4-4 Level 4,
EN 61000-4-5 L-N Level 3,
L / N-FG Level 4
EN 61000-4-6 Level 3,
EN 61000-4-8 Level 4,
EN 61000-4-11
ENV 50204 Level 2,
EN 61204-3
Switching Power Supply
Type SPD 100W Bi-phase
DIN rail mounting
Loading...