CARLO GAVAZZI SCTL55 Instruction Manual

Download

Page 1

ENITDEFRESDAZH

SCTL55

Smart Conﬁgurator

for IO-Link devices

Instruction manual

Manuale d’istruzione

Betriebsanleitung

Manuel d’instructions

Manual de instrucciones

Brugervejledning

使用手册

UAB Carlo Gavazzi Industri Kaunas Raudondvario pl. 101 Kaunas LT-47184 Lithuania

Page 2

Table of contents

1. Introduction ................................................................................................... 3

1.1 Validity of documentation .........................................................................................3

1.2 Who should use this documentation ...........................................................................3

1.3 Safety information ...................................................................................................3

1.4 Service and warranty ..............................................................................................3

2. Structure ....................................................................................................... 4

3. Description .................................................................................................... 5

3.1 Contents of the box .................................................................................................5

4. Features ........................................................................................................ 6

4.1 General .................................................................................................................6

4.2 IO-Link interface ......................................................................................................6

4.3 IODD ﬁle administration ...........................................................................................6

4.4 Conﬁguration ﬁle administration ...............................................................................6

4.5 Button function ........................................................................................................6

4.6 Electrical ratings ......................................................................................................6

4.7 Battery info ............................................................................................................. 6

4.8 LED function ...........................................................................................................7

4.9 Environmental .........................................................................................................7

4.10 Approval and markings .........................................................................................8

4.11 Accessories ..........................................................................................................8

5. Unboxing ...................................................................................................... 8

5.1 Switch ON your SCTL55 ..........................................................................................8

5.2 Screen gestures .......................................................................................................8

6. Software ....................................................................................................... 9

6.1 Example of inductive sensor connected ......................................................................12

6.2 Example of capacitive sensor connected ....................................................................17

Page 3

1. Introduction

This manual is a reference guide for Carlo Gavazzi Smart Configurator. It describes how to set up and use the product for its intended use.

1.1 Validity of documentation

This manual is valid only for SCTL55 and until any new documentation is published. It describes the function and operation of the product for its intended use.

1.2 Who should use this documentation

This manual contains all the information you need for commissioning and operating the SCTL55 and must be read and completely understood by specialized personnel dealing with Configurator. We highly recommend that you read the manual carefully before starting to use the SCTL55. Save the manual for future use. The installation manual is intended for qualified technical personnel.

1.3 Safety information

Hospitals, electronic implants and pacemakers

Radio Interference

Fire hazard

Contact with liquid

Batteries

Shock and impact

Maintenance

General

Do not use or place device near any medical device. Anyone who is ﬁtted with an electronic implant or pacemaker must hold the device on the opposite side as a precaution when the device is on.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area can cause harmful interference, in which case the user will be required to correct the interference at his own expense.

Do not leave your device near heat sources such as radiators or cookers. Do not leave your device charging near ﬂammable materials as there is a risk of ﬁre.

Do not expose the device to liquid or touch it with wet hands. Any damage caused by liquid may be irreparable.

The device contains Li-ion batteries. Do not disassemble the device. Do not destroy the batteries. Never use battery that have been damaged. Leave batteries away from magnetic objects as the latter might cause a short circuit (between the positive and negative terminals of the batteries) and destroy battery and device. As a general rule, you shoud not expose the batteries to very high or low temperatures, (below 0°C or above 45°C).

Handle and use your device with the utmost care. Protect your device. Shocks and impacts may damage it. Part of the device is made of glass and might break if the device is dropped or is subject to severe impact. Do not touch the display with sharp objects.

Cleaning: dry cloth only. Do not disassemble device.

Protection provided by the equipment may be impaired if used in a manner not speciﬁed by the manufacturer

1.4 Service and warranty

Not everybody is authorized to open the Smart Configurator. This operation is reserved exclusively for CARLO GAVAZZI technical service personnel. Tampering of the SCTL55 by unauthorized personnel voids the warranty.

Page 4

2. Structure

Battery status

Power

Micro SD card port

Micro USB port

M8 3-wire

M12

M8 4-wire

LEDs

battery

indication

LEDs state indication

5.5”

Page 5

3. Description

The SCTL55 is the Industry 4.0 portable, self-powered and user friendly smart configurator for IO-Link sensors that accesses your sensor data and manages its parameters. There is no need for a PC and dedicated software.

Through a 5.5” HD touchscreen display and dedicated Apps you can now:

• Have access to an advanced diagnostic, showing operating hours, number of detections, operating cycles and alarms

• Verify your sensor status, including current temperature, quality of run and process data

• Easily change the operating sensor parameters to better meet the process requirements (switchpoint mode, sensing distance, timing functions, PNP/NPN/push-pull, NO/NC). It is also possible to add favourite parameters to the homepage and create different user profiles (observer, maintainer, specialist).

• Automatically download IODD files, through Wi-fi. As soon as you plug the sensor to one of the 3 connectors on the top of the device, if the IODD file is not already on the device memory, it automatically connects to the download area and shows all the data of the sensor.

Thanks to these innovations you can now manage and optimize your sensor very quickly and improve your processes and predictive maintenance.

3.1 Contents of the box

Page 6

4. Features

4.1 General

Manufacturer Carlo Gavazzi UAB Industri Kaunas Model number SCTL55 Body Polycarbonate Dimensions (H x L x W) 62 x 222 x 90 [mm] Weight 600 g Screen size 5.5”

Shipping weight (including bag etc.)

800 g

4.2 IO-Link interface

Supply voltage 24VDC +/- 20% Max load 80mA/Short circuit protected SIO2 output test Led indicated SIO2 (Standard Input Output 2) logic state (pull down only) Incorrect polarity protection Yes Connectors to sensor Plug types: M8 3-wire, M8 4-wire, M12 IO-Link protocol support IO-link v1.1

4.3 IODD file administration

Wifi Download IODD ﬁle via Conﬁgure App Micro SD card (not inclulded) Import IODD file from Micro SD card

4.4 Configuration file administration

Micro SD card (not inclulded) Save and load device conﬁguration ﬁles Internal memory Save and load device configuration files

4.5 Button function

Battery status Short press will indicate battery level for 5 sec. + (plus)

- (minus)

Power button

Reserved for future use

Hold for 3 sec to power on / off your Smart Configurator Short press to switch on / off the screen

4.6 Electrical ratings

Standard charger via micro USB 5V/1A or PC USB port

4.7 Battery info

Operating time (connected to sensor)

Standby time Device completely off: 6 months Internal batteries 3.8V/10Ah (2x3,5Ah + 3Ah) (LI-ION) Charge time 5V/1A standard charger via USB mini connector: <10 hours Battery expected lifetime 60% capacity after 500 cycles

Full operation: > 5 hours Screen off: > 22 hours

Page 7

4.8 LED function

Battery LEDs (green)

When the device is connected to power, it ﬂashes from the ﬁrst LED

Flashing

Steady on

Flashing The main battery is almost discharged. Please recharge your device

on the left to the other LEDs on the right and indicates that the main battery is being charged.

After briefly pressing the battery status button, it indicates the status of the charge of the main battery. Each LED indicates around 20% of the charge.

Power LED (green)

Steady on The device is switched on

IO-Link LED (green)

Flashing

Steady on IO-Link communication is established with the IO-Link sensor connected

IO-Link communication is ready, the sensor is not connected or it does not have IO-Link communication enabled

Error LED (red)

Flashing Error (short circuit, data transmission error, overload)

SIO2 LED (orange)

Steady Status of the switching input output 2 of the sensor

USB LED (orange)

Steady Micro USB port is connected to a PC

4.9 Environmental

Operational environment To be used in indoor applications only IP-rating IP30

Ambient air temperature

Storage temperature 0 to + 50°C

Ambient humidity range

Transportation test EN60068-2-31 Drop test EN62368-1:2014, T.7 Pollution degree 2

Charging: 10 to + 35°C Operating: 0 to + 40°C

Operating: 0 to + 90% non condensing Storage: 0 to + 90% non condensing

Page 8

4.10 Approval and markings

General reference

FCC

Approvals

EN62368-1 Radio ETSI EN 300 328 v2.1.1 EMC CFR 47 Parts 15.107 & 15.109

Radio CFR 47 Part 15 Subpart C Contains FCC ID: 2AH8Q-HT17

4.11 Accessories

DC 5V/1A (current limited). Only suitably rated and approved USB charger should be used with the

Micro USB power adapter (not included)

Extension cable 0.5m M12 to 4 hooks, included Protective holster Included Lanyard Included Micro USB cable Included Quick start guide Included

equipment as per the National Regulations for the country of use. Marked as LPS (according to IEC 60950-1) or PS2 (according to IEC 62368-1). Using any other may affect the safety of the equipment. Contact the manufacturer if in doubt

5. Unboxing

5.1 Switch ON your SCTL55

To switch on your smart configurator, press and hold the power key button for 3 seconds.

5.2 Screen gestures

Touch: touch an item once. For example, touch to select an option

Swipe: swipe your finger on the screen vertically to scroll through a list or horizontally to

change a value

Page 9

6. Software

Home screen

Settings

Time and date

Configure app

STEP1: settings > Wi-Fi

Wi-Fi switch

Store

Select settings

Select WiFi

Select to turn on the Wi-Fi and select one of the networks available from the list, to connect the device to internet. If requested, insert the password

Page 10

STEP2: store > update

Keep your smart configurator up to date and accept available software updates to get new and enhanced features

Select the store

STEP3: configure app

Select the icon to start

Page 11

STEP4: connect your sensor

Back to home screen

Sensor not connected

IODD file not found in the device

Press the icon to download it automatically from internet

Sensor unrecognized

IODD file editable, wait..

Warning:

It is possible to connect only one sensor at a time

Page 12

6.1 Example of inductive sensor connected

Parameterization

Main icons

Create a user: parameterization > settings > users

Close Configure App and go back to home screen

Process data

Graphic of set point

Favourite parameters

Select parameterization

Functions Observer Maintenance Specialist

Identification

Observation

Diagnosis

Basic

Parameter

Advanced

Select settings

✓ ✓ ✓

Select users, then to add a user with a specific role

Roles

✓ ✓

✓

Page 13

Project options: parameterization > save, load or write

Save, load or write

a project

Delete, rename or load a project

List of projects

Touch

to open a saved

project

IODD options: parameterization > settings > IODD

Select the project to open and touch

Delete or update the existing IODD file

Refresh the IODD index

Select settings

Select IODD

Page 14

Process data

Example of SO active

Information:

Please scan the QR code on the right or press the link below to understand all the possible settings via IO-Link for our inductive sensors

http://www.productselection.net/MANUALS/UK/IOL_IM.pdf

Switching output setup

Select + details

Select ▼ to change

Select + to change

Select + SO

Scroll vertically to find the desired parameter

Command icons

Page 15

Command icons

Touch this to write the changes into the sensor

Touch this to go ahead

Touch this to activate the live mode When the live mode is turned on, the changes are written automatically into the sensor

Touch this to read the parameters of the sensor

Attention:

Remember to push after each change if mode is not

Touch this to go back to the previous parameter

Add a parameter to the favourite list

Scroll vertically to find the desired parameter, for example “So” (source)

Swipe left and press to add it to the favourites list

Favourite selection saved

Page 16

Delete a favourite parameter

Touch the arrow to open the list

Use a main icon

Scroll vertically to find the icon, then touch it

Touch to delete it

Touch the number to change, for example “3” of divider

Attention:

Remember to push after each change if mode is not

Select the icon

To change the value: Touch “3” and digit via keypad the correct value, or... Swipe horizontally, or... Touch + or - to change by 1, or touch + or - to change by 10

Page 17

6.2 Example of capacitive sensor connected

Options

Close Configure App and back to home screen

Process data

Graphics of set point

Main icons

Favourite parameters

Information:

Please scan the QR code on the right or press the link below to understand all the possible settings via IO-Link for our capacitive sensors

http://www.productselection.net/MANUALS/UK/MAN%20CA18-30%20IO-LINK%20MUL.pdf

CARLO GAVAZZI SCTL55 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual