Carlo Gavazzi RP1A, RP1B Catalog Page
Specifications are subject to change without notice (30.09.2005) 1
Solid State Relays
PCB, 1-Phase ZS/IO
Types RP1A, RP1B
•AC Solid State Relay for PCB mounting
•Zero switching or instant-on
•Rated operational current: 3, 5 or 5.5 AACrms
•Rated operational voltage: Up to 480 VACrms
•Surface mount technology
•Flexible encapsulation for extended life
•Control voltage: 3 to 32 VDC* / 16 to 32 VAC**
•Opto-isolation: > 4000 VACrms
•Non-repetitive peak voltage: Up to 1000 V
p
•Non-repetitive surge current: Up to 250 A
p
Product Description
Ordering Key
Solid State Relay (PCB)
Number of poles
Switching mode
Rated operational voltage
Control voltage
Rated operational current
Rated operational Non-rep. voltage Control voltage Rated operational current
voltage 3 AACrms 5 AACrms 5.5 AACrms
230 VACrms 650 Vp 3 to 32 VDC RP1A23D3 RP1A23D5 RP1A23D6
RP1B23D3 RP1B23D5 RP1B23D6
16 to 32 VAC - - RP1A23A6
400 VACrms 850 Vp 3 to 32 VDC RP1A40D3 RP1A40D5 RP1A40D6
4 to 32 VDC RP1B40D3 RP1B40D5 RP1B40D6
480 VACrms 1000 Vp 4 to 32 VDC RP1A48D3 RP1A48D5 RP1A48D6
RP1B48D3 RP1B48D5 RP1B48D6
Switching mode Rated operational voltage Rated operational current Control voltage
A: Zero switching 23: 230 VACrms 3: 3 AACrms D: 3 to 32 VDC*
B: Instant-On switching 40: 400 VACrms 5: 5 AACrms A: 16 to 32 VAC**
48: 480 VACrms 6: 5.5 AACrms
* 4 to 32 VDC for RP1A48..
4 to 32 VDC for RP1B40.. and RP1B48..
** Only available for 230V, 5.5 A
Type Selection
Selection Guide
RP 1 A 23 D 3
The RP1 is an SSR series for
socket- or PCB-mounting,
providing an ideal interface
between logic controls and
AC loads. The RP1 is
designed for resistive and
inductive loads up to
480VACrms. Two regulated
control voltage ranges cover
most standard input requirements in an economic package. These features allow a
direct substitution of existing
PCB mounted relays with
RP1. Internally this new series
enjoys an improved technical
design with the introduction of
stress-free flexible encapsulation and automated assembly
of components. Opto-isolation and load switching are
performed by individual components, providing higher reliability than monolithic
designs. Additionally RP1..6
is a special version with high
current surge capability that
reduces fusing requirements.
This relay can also drive higher AC53a loads up to 5 A.
The Solid State technology
used can withstand peak voltages of 1000V, making the
RP1 series suitable to drive
AC loads such as valve
solenoids and small induction
motors.
Rated operational Non-rep. voltage Control voltage Rated operational current
voltage 3 AACrms 5 AACrms 5.5 AACrms
230 VACrms 650 Vp 5 to 34 VDC RP1A23D3M1 RP1A23D5M1 RP1A23D6M1*
RP1B23D3M1 RP1B23D5M1 RP1B23D6M1
16 to 32 VAC - - RP1A23A6M1
* For operational voltages ≥ 230 VACrms add suffix M2 to part no.
Selection Guide (mounted on DIN EN adaptor)
2 Specifications are subject to change without notice (30.09.2005)
Insulation Input - Output
Insulation resistance ≥ 1010Ω
Insulation capacitance ≤ 8 pF
RP 1
RP1....3 RP1....5 RP1....6
Rated operational current
AC 51 @ T
a
= 25ºC 3 A 5 A 5.5 A
AC 53a @ Ta= 25ºC 2 A 3 A 5 A
Min. operational load current 20 mA 20 mA 20 mA
Rep. overload current t=1 s 10 AACrms 12 AACrms 16 AACrms
Non-rep. surge current t=20 ms 65 A
p
80 A
p
250 A
p
Off-state leakage current < 1 mA < 1 mA < 1 mA
I2t for fusing t=10 ms 20 A2s 50 A2s 340 A2s
Critical dI/dt @ 50 Hz 50 A/µs 20 A/µs 20 A/µs
Critical dV/dt off state min. 250 V/µs 500 V/µs 500 V/µs
On-state voltage drop
@ rated current < 1.2 Vrms < 1.2 Vrms < 1.2 Vrms
Output Specifications
Operating temperature
-20° to +70°C (-4° to +158°F)
Storage temperature
-40° to +100°C (-40° to +212°F)
Thermal Specifications
RP1...A. RP1A23A6
Control voltage 16 - 32 VAC
RP1.23.. RP1A40.. 3-32 VDC -
RP1B40.. RP1.48.. 4-32 VDC Pick-up voltage 10 VAC
RP1.23.. RP1A40.. 2.8 VDC -
RP1B40.. RP1.48.. 3.8 VDC Drop-out voltage 1.2 VDC 5 VAC
Max. input curent 13 mAAC
RP1A... 10 mADC -
RP1B... 15 mADC Max. reverse voltage 32 VDC Response time pick-up
RP1A... < 10 ms -
RP1B... 12 VDC/ 50 Hz < 160 µs -
5 VDC/ 50 Hz < 320 µs -
Response time drop-out < 20 ms
RP1A... < 10 ms -
RP1B... < 10 ms -
Input Specifications
RP1.23.. RP1.40.. RP1.48..
Operational voltage range
RP1A... 12 - 265 VACrms 20 - 440 VACrms 20 - 530 VACrms
RP1B... 12 - 265 VACrms 12 - 440 VACrms 12 - 530 VACrms
Non-rep. peak voltage 650 V
p
850 V
p
1000 V
p
Rated insulation input to output 4 kVACrms 4 kVACrms 4 kVACrms
Operational frequency range 45 - 65 Hz 45 - 65 Hz 45 - 65 Hz
Power factor > 0.5 > 0.5 > 0.5
Zero voltage turn-on < 10 V < 10 V < 10 V
Approvals UL, cUL, VDE* UL, cUL, VDE* UL, cUL, VDE*
CE-marking Yes Yes Yes
* VDE 0700, VDE 0805 (excluding RP1A23A6)
General Specifications
Loading...