Carlo Gavazzi RGC1S, RGS1S Accessories Catalog

RGC1S, RGS1S

RG Current Sensing

Control Module

RG Power Module

Thermal Pad

provided w ith

RGS1SDIN

2xsc rews + was her M 5x23mm, Torx T 25

(provid ed with R G S 1DIN)

Max. mounting torque: 1.5Nm

R

GS1SDIN

1 screw M4, Philips PH1

(provided with SSR)

Max. mounting torque: 0.3mm

Accessories

RG DIN Clip

Ordering Key

DIN clip accessory

This DIN Clip accessory can be mounted to any RGS model
and will enable the RGS to be DIN rail mount. Current rating
@ 40˚C is 10AAC. Refer to ‘Current Derating’ section for
Space Derating.

Mounting Instructions for RGS1DIN to RGS

RGS1DIN

The RG Power Module is gradually tightened (alternating between the 2 screws) to a maximum torque of 1.5Nm.

Once the power module is tightened to the RGS1DIN, the control module can be mounted on top of the power module and screwed with a
torque of 0.3Nm to ensure good contact between the 2 units.

Specifications are subject to change without notice (18.03.2013) 25

RGC1S, RGS1S

9.2

9.5

106

98

82

47.5

1

7.8
5

Accessories (cont.)

RGS1DIN Dimensions

Current Derating (RGS1S + RGS1DIN)

Installation Instructions

26 Specifications are subject to change without notice (18.03.2013)