Carlo Gavazzi ICS, IP69K, M12 Data Sheet

ICS, IP69K, M12

Proximity Inductive Sensors - Ecolab certified
Standard and Extended Range, Stainless Steel Housing
Types ICS, IP69K, M12

• Sensing distance: 2 to 8 mm

• Flush or non-flush mountable

• Long body version

• Rated operational voltage (U

• Output: DC 200 mA, NPN or PNP

• Normally open or normally closed

• 4 x 90° LED indication for output ON, short-circuit and
overload

• Protection: reverse polarity, short circuit, transients

• M12 plug version

• According to IEC 60947-5-2

• High-pressure washdown resistant

• Ecolab certified, FDA-certified plastic

• Laser engraved on the housing, permanently legible

• Extended temperature range: -40°C...+80°C

• CSA certified for Hazardous Locations

): 10 - 36 VDC

b

Product Description Ordering Key

A family of inductive proxim­ity switches in stainless steel
(AISI 316L) ideal for food
and beverage applications
where sensors are exposed
to high pressure and high
temperature cleaning pro­cesses.

They are fully sealed and
resistant to all common
acid and alkaline cleaning
agents and disinfectants
(Ecolab certified). IP68 and
IP69K-rated products. Out­put is open collector NPN or
PNP transistors.

Type
Housing style
Housing material
Housing size
Housing length
Detection principle
Sensing distance
Output type

ICS12LF04NOM1-FB

Output configuration
Connection
Washdown series

Type Selection

Connec- Body Rated Ordering no. Ordering no. Ordering no. Ordering no.
tion style operating NPN, PNP, NPN, PNP,
distance S

Standard range

Plug Long 2 mm
Plug Long 4 mm

Extended range

Plug Long 4 mm
Plug Long 8 mm

1)

For flush mounting in metal

Normally open Normally open Normally closed Normally closed

n

1)

ICS12LF02NOM1-FB ICS12LF02POM1-FB ICS12LF02NCM1-FB ICS12LF02PCM1-FB

2)

ICS12LN04NOM1-FB ICS12LN04POM1-FB ICS12LN04NCM1-FB ICS12LN04PCM1-FB

1)

ICS12LF04NOM1-FB ICS12LF04POM1-FB ICS12LF04NCM1-FB ICS12LF04PCM1-FB

2)

ICS12LN08NOM1-FB ICS12LN08POM1-FB ICS12LN08NCM1-FB ICS12LN08PCM1-FB

2)

For non-flush mounting in metal

Specifications

Rated operational voltage (Ub)
Ripple ≤ 10%
Output current (I

) ≤ 200 mA @ 50°C

e

(≤ 150 mA @ 50-80°C)

OFF-state current (I

) ≤ 10 μA

r

No load supply current (I
Voltage drop (U

) Max. 2 VDC @ 200 mA

d

Protection Reverse polarity,

short-circuit, transients

Voltage transient 1 kV/0.5 J
Power ON delay (t

) ≤ 20 ms

v

Operating frequency (f) ≤ 2000 Hz

Specifications are subject to change without notice (08.01.16) 1

10 to 36 VDC (ripple incl.)

) ≤ 15 mA

o

Indication for output ON

Activated LED, yellow (4x90°)
NO version Target present
NC version Target not present

Indication for short circuit/
overload LED blinking (f = 2 Hz)

Assured operating
sensing distance (S

) 0 ≤ Sa ≤ 0.81 x S

a

n

Effective operating
distance (S

Usable operating distance (Su)

) 0.9 x Sn ≤ Sr ≤ 1.1 x S

r

0.9 x Sr ≤ Su ≤ 1.1 x S

n

r

Repeat accuracy (R) ≤ 5%
Differential travel (H)

(Hysteresis) 1 to 20% of sensing dist.

ICS, IP69K, M12

Specifications (cont.)

Ambient temperature
Operating

-40° to +80°C (-40° to +176°F)

short exposure (15’) to
100°C during cleaning
process
Storage

-40° to +80°C (-40° to +176°F)

Shock and vibration IEC 60947-5-2/7.4
Housing material

Body Stainless steel (AISI 316L)

Front

Grey PPS - FDA-certified

Connection
Plug M12 x 1

Degree of protection IP67, IP68 (1 m, 7 days),

IP69K

Weight (cable/nuts included) Max. 35 g
Dimensions See diagrams below
Tightening torque 25 Nm

Dimensions (mm)

Approvals cULus (UL508)

cCSAus As Process Control

Equipment for Hazardous
Note: The terminal connector
(version ...M1) was not
evaluated. The suitability of
the terminal connector should
be determined in the end-use
application.

Locations.

- Class I, Division 2,
Groups A, B, C and D.

- T5, Enclosure Type 4.
Ambient temperature
Ta: -25° to +60°C

CCC is not required for
products with a maximum
operating voltage of ≤ 36 V

EMC protection According to IEC 60947-5-2
IEC 61000-4-2 (ESD) 8 KV air discharge,
4 KV contact discharge
IEC 61000-4-3 3 V/m
IEC 61000-4-4 2 kV
IEC 61000-4-6 3 V
IEC 61000-4-8 30 A/m

MTTF

770 years @ 50°C (122°F)

d

Flush version

38.7 6.2 9.6 10.3

64.8

LED (4 x 90°)

3

142

6.2

Non-flush version

Installation

Flush mountable proximity switches, when installed in
damping material, must be according to Picture 1A.

Picture 1A Picture 1B

≥ 3 x S

n

d

Free zone or
non-damping
material

Non-flush mountable proximity switches, when installed in
damping material, must be according to Picture 1B.

≥ 3 x S

64.8

32.5 6.2 9.6 10.3

n

≥ 3 x d

d

**

3

142

LED (4 x 90°)

Free zone or
non-damping
material

: nominal sensing distance

S

n

d : sensor diameter (12 mm)

: nominal sensing distance

S

n

d : sensor diameter (12 mm)

** ≥ 6 mm, Sn = 4 mm (1x)
≥ 12 mm, Sn = 8 mm (2x)

2 Specifications are subject to change without notice (08.01.16)