Carlo Gavazzi DAA51, DAA71 Catalog Page

Mounting Output Housing Supply: Supply:
12 to 240 VAC/DC 24 VDC and 24 to 240 VAC
DIN-rail SPDT Mini-D DAA 51 C M24 DIN-rail DPDT Mini-D DAA 71 D W24 DAA 71 D M24
Specifications are subject to change without notice (13.10.04) 1
Product Description Ordering Key
Delay on Operate
Multi-voltage delay on oper­ate timer with 7 selectable time ranges within 0.1 s and 100 h. For mounting on DIN­rail
Housing 17.5 mm wide for SPDT version and 35.5 mm for DPDT version, suitable both for back and front panel mounting.
• Time range 0.1 s to 100 h
• Knob selection of time range
• Knob adjustable time setting
• Automatic start
• Repeatability: ≤ 0.2%
• Output: 5 A SPDT or 5 A DPDT relays
• For mounting on DIN-rail in accordance with DIN/EN 50 022
• 17.5 mm (DAA51C) or 35.5 mm (DAA71D) DIN-rail housing (DIN 43880)
• Combined AC and DC power supply
• LED indication for relay status and power supply ON
Output SPDT or DPDT relays Rated insulation voltage 250 VAC (rms) Contact Ratings (AgSnO
2
Resistive loads AC 1 5 A @ 250 VAC
DC 12 5 A @ 24 VDC
Small inductive loads AC 15 2.5 A @ 250 VAC
DC 13 2.5 A @ 24 VDC
Mechanical life 30 x 106operations Electrical life 10
5
operations
(at 5 A, 250 V, cos ϕ = 1)
Operating frequency < 7200 operations/h Dielectric strength
Dielectric voltage 2 kVAC (rms) Rated impulse withstand voltage 2.5 kV (1.2/50 µs)
Output Specifications
Type Selection
DAA 51 C M24
Housing Function Type Item number Output Power supply
Time Specifications
Time ranges
Knob selectable 0.1 to 1 s
1 to 10 s 6 to 60 s 60 to 600 s
0.1 to 1 h 1 to 10 h 10 to 100 h
Setting accuracy ≤ 5%
Types DAA51, DAA71
Timers
Power supply Overvoltage cat. II
Rated operational voltage (IEC 60664, IEC 60038) through terminals: (DAA51C) A1, A2 M24 24 VDC ± 15% and
24 to 240 VAC + 10% -15%, 45 to 65 Hz
(DAA71D) A1, A2 M24 24 to 240 VAC +10% -15%,
45 to 65 Hz
W24 12 to 240 VDC +10% -15%
and 12 to 240 VAC +10% -15%, 45 to 65 Hz
Voltage interruption 10 ms Rated operational power
(DAA51C) AC supply 4 VA
DC supply 1.5 W
(DAA71D) AC supply 5.5 VA
DC supply 2 W
Supply Specifications
DAA51 DAA71
Repeatability 0.2% Time variation
Within rated power supply 0.05%/V Within ambient temperature 0.2%/°C
Reset
Power supply interruption 200 ms
2 Specifications are subject to change without notice (13.10.04)
L(+)
N(-)
m m
A1
15
25
162618
28
A2
DAA01C... DAA01D...
DAA01D...
DAA51, DAA71
Power ON delay 100 ms Indication for
Power supply ON LED, green Output relays ON LED, yellow
(flashing when timing)
Environment (EN 60529)
Degree of protection IP 20 Pollution degree 2 (IEC 60664) Operating temperature -20° to +60°C, R.H. < 95% Storage temperature -30° to +80°C, R.H. < 95%
Housing dimesions
(DAA51C) 17.5 x 81 x 67.2 mm (DAA71D) 35.5 x 81 x 67.2 mm
Weight 75 g Screw terminals
Tightening torque Max. 0.5 Nm according to
IEC EN 60947
Approvals UL, CSA (DAA51 only)
RINA (DAA51 only)
CE Marking Ye s EMC
Electromagnetic Compatibillity
Immunity According to EN 61000-6-2 Emission According to EN 50081-1
General Specifications
Wiring Diagram
Centre knob:
Time setting on relative scale: From 1 to 10 with respect to the chosen range.
Lower knob:
Setting of time range
Time Setting
Mode of Operation
The yellow LED, flashing when timing, is ON as soon as the relay turns ON.
The set delay period begins as soon as the power supply is connected. At the end of the set delay the relay oper­ates and does not release
until the power supply is interrupted for at least 200 ms. If the power supply is interrupted for at least 200 ms before the relay operates the time is set to zero and the circuit is ready for a new time period.
DAA51C... DAA71D... DAA71D...
67.2
18.7
45
17.5
81
2
Dimensions
DAA51 DAA71
67.2
18.7
45
35.5
81
2
Operating Diagram
OFF
Power Supply
Relay
ON
µ
µ
Tensione di alimentazione
Relè
LED
T
Loading...