Carimali CENTO 50, CENTO Series Quick Start Manual

QUICK START GUIDE

CENTO

NT-05451-00-EN

Pag. 1

Turn on the tap from the water mains and switch the power ON by pressing the “I.G “ main switch.

seconds the software version: Example ( VER 4.10 ) (E2 model)

This operation will automatically stop when the level of the probe is reached

s slowly flash

heating up phase the display show

During this phase heating of the boiler starts, wait about 20 minutes to reach the set

This operation will automatically stop when the boiler temperature is reached, the display shows :

EEP THE STEAM LEVER

Check the delivery pressure in the pump gauge by fitting

1-2

I.G.

STEAM

light on in sequence

NDS, THIS OPERATION

the filter holder filled with properly ground, pressed coffee

-3-4-5

GAUGE

1-2-3-4-5

STEAM

GAUGE

The display will show for few

HOT WATER

I.G. LEGEND:

Re-filling the boiler.

I= ON

O= OFF

STARTING UP

CARIMALI IMC
CENTO50 VX.XX

DISPLAY

.

FILLING UP

During this phase all the keypad LED

Heating the boiler.

During the

PLEASE NOTE:
DURING THIS STAGE, K
FROM THE BOILER

order to deliver at 8/9 bars.

simultaneously.

s the boiler temperature and all the keypad LEDs

HEATING BOILER

XXX °C

temperature.

SELECT DRINK

XXX °C

OPEN FOR A FEW SECO

from right to left.

WILL RELEASE THE AIR

dose in

Pag. 2