Instruction Manual
Precautions for Safety
<Warning> This precaution must be read to protect the users and to prevent any property loss
or inconvenience. Please read it carefully for proper use.
Do not install or repair this product by yourself.
Do not install where the space between the door and the door frame is less than 5mm.
Be careful not to expose your PIN code, and please change it regularly.
Do not use the product with wet hands. Be aware of liquid such as water or drinks permeating
into the product.
Do not press the buttons of the keypad with excessive force or use sharp objects.
Please confirm that the door is completely locked before leaving.
Please check the polarity (+/-) of the battery before inserting.
Please be aware as fluid flowing or battery rupture may occur if the polarity of the battery is
reversed.
Change all the batteries at once when they go dead. Do not confuse new batteries with the old
ones.
Do not use water, benzene, or alcohol to clean the product. Only use dry clothes.
Please replace the batteries within a week after the initial low-battery alarm.
Identification of Product
Card Reader
- Card
authentication
Bluetooth 4.0[BLE]
- i-Key authentication
- d-Key authentication
Keypad
- PIN Code
authentication
Out-Body