8
2 ASSEMBLY INSTRUCTIONS, MAINTENANCE AND CARE
2.1 General instructions
+ Please check if all parts and tools belonging to the equipment are included in the delivery and if the-
re is any transport damage. If there are any complaints, please contact your contract partner directly.
+ Some of the parts to be used in assembly can are already be pre-mounted in order to make set-up as
easy as possible.
+ The equipment must be assembled by adults. In case of doubt, ask for assistance from another per-
son with technical skills.
+ Keep children away from the equipment during assembly, because small parts are included in the
delivery and may be swallowed.
+ Make sure that you have enough space (at least 1.50 m) in every direction during assembly.
+ Do not leave any tools and packaging materials like plastic sheeting laying around to avoid danger
of suocation for children.
+ Assemble the equipment on an underlay mat or on the cardboard packaging in order to avoid da-
mage to the equipment and to the oor (scratches).
+ Before starting assembly, all individual parts should be placed on the oor next to each other.
+ Read the assembly instructions carefully and assemble the equipment according to the illustrations.
Proceed carefully and cautiously.
+ First loosen all parts and check for their correct tting. Then tighten the screws using a tool.
+ Modications to the design or improper repairs may pose a hazard to the user and should not be
carried out. The product warranty may be void as a result.
+ Only authorized service technicians are permitted to carry out all servicing and/or repairs – it exclu-
des maintenance and care.
+ Damaged or worn components may impair your safety and the lifespan of the equipment. You
should therefore immediately replace damaged or worn components. Please contact your contract
partner in such a case. The equipment should no longer be used until it has been repaired. When
needed, only use original cardiostrong® spare parts.
+ Check the tightness of all screw connections once a month.
+ In order to be able to guarantee the constructively dened safety level of this equipment, we re-
commend having the equipment regularly maintained (at least once a year) by specialists (contract
partner service technicians).
+ The equipment may be cleaned of dust, dirt and sweat using a damp cloth. The use of solvents
should be strictly avoided.