CARDIOSTRONG CST-BX70i-2, Ergometer BX70i Assembly And Operating Instructions Manual

Assembly and Operating Instructions
ErgometerBX70i
Art. No. CST-BX70i-2
CSTBX70i.02.02
2
3
Dear Customer,
Thank you for deciding for a high-quality training equipment of the brand cardiostrong®, the brand that makes athlete‘s hearts beat faster. cardiostrong® oers a wide range of home tness equipment like elliptical cross trainers, ergometers, treadmills and rowing machines. cardiostrong® equipment is the optimal equipment for all those who want to train at home independent of goals and tness level. For further information please visit www.sport-tiedje.com or www.cardiostrong.de.
SAFETY NOTICE
Please read all of the instructions carefully before assembly and rst use. These instructions are intended to ensure speedy assembly and
explain safe usage. Make sure that all people exercising with the equipment (in particular children and persons with limited physical, sensory, mental or motor capabilities) are informed about these instructions and its content in advance. In case of doubt, a responsible person must supervise the use of the equipment.
This equipment has been manufactured according to the latest safety knowledge. As far as possible, potential safety hazards which could cause injury have been eliminated. Make sure to follow the instructions carefully and that all parts are securely in place. If required, read through the instructions again to correct any mistakes.
Please pay close attention to the safety and maintenance instructions given here. The contract partner cannot be held liable for damage to health, accidents or damage to the equipment when it is not used in accordance with these instructions.
The equipment is suitable for home use as well as semi-professional use (e. g., hospitals, clubs, hotels, schools, etc.). It is not suitable for commercial or professional use (e. g., commercial gyms).
Retain these instructions in a safe place for future reference, maintenance or when ordering replacement parts.
4
CONTENTS
1 GENERAL INFORMATION 6
1.1 Technical data 6
1.2 Personal safety 7
1.3 Electrical safety 8
1.4 Set-up place 8
2 ASSEMBLY INSTRUCTIONS, MAINTENANCE AND CARE 9
2.1 General instructions 9
2.2 Faults and Troubleshooting 10
2.3 Maintenance and service calendar 11
3 ASSEMBLY 11
3.1 Package contents 11
3.2 Assembly instructions 13
4 OPERATING INSTRUCTIONS 19
4.1 Console display 19
4.2 Button function 21
4.3 Turning on and setting the equipment 22
4.4 Training programme 22
4.4.1 Manual mode 22
4.4.2 Program mode 24
4.4.3 H.R.C. mode 24
4.4.4 Watt mode 25
4.4.5 User program mode 25
4.4.6 Recovery 26
4.4.7 Body fat 26
4.5 iConsole+ and Fit Hi Way training apps 28
5 WORKOUT INSTRUCTIONS 29
5.1 Heart-rate measuring 29
5.2 10 tips for eective ergometer training 32
5.3 Designing a workout 33
5.4 Stretching exercises for leg and chest muscles 35
5.5 Workout journal 37
5
6 WARRANTY INFORMATION 38
7 DISPOSAL 40
8 ORDERING ACCESSORIES 41
9 ORDERING SPARE PARTS 42
9.1 Service hotline 42
9.2 Serial number and model name 42
9.3 Parts list 43
9.4 Exploded drawing 46
6
1 GENERAL INFORMATION
1.1 Technical data
LED display of
+ speed in km/h + training time in min + training distance in km + cadence (rotations per minute) + calories burnt + heart rate (when using the hand sensors or a chest strap) + watt + resistance level
Resistance system: electromagnetic induction brake Resistance level: 32 Watt: 25 - 350 Watt (adjustable in 5-watt increments)
Total number of training programs: 18 Manual programs: 1 Pre-set programs: 12 Watt-controlled programs: 1 Heart rate controlled programs: 1 User dened programs: 1
Flywheel mass: 10 kg Transmission: 1 : 8.1 Pedal arm length: 17 cm
Weight and dimensions
Article weight (gross, including packaging): 50.8 kg Article weight (net, without packaging): 46.6 kg
Packaging dimensions (L x W x H): approximately 102 cm x 28 cm x 68 cm Set-up dimensions (L x W x H): approximately 96 cm x 56cm x 143 cm Maximum user weight: 150 kg/330 lbs
7
1.2 Personal safety
+ Before you start using the equipment, you should consult your physician that
this type of exercise is suitable for you from a health perspective. Particularly aected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year.
+ Please note that working out excessively can seriously damage your health. Please
also be aware that heart rate monitoring systems might be imprecise.
+ The equipment may only be used for its intended purpose; that means for cycle
training for adults.
+ Any other usage is prohibited and potentially dangerous. The contract partner
cannot be held liable for damage resulting from improper use.
+ The equipment is strictly for use by one person at a time. + Children should not be allowed unsupervised access to the equipment. + Before starting your training, make yourself familiar with all of the equipment‘s
functions and setting options. Have an expert explain the correct usage of the
product to you.
+ Make sure that nobody is in the range of motion of the equipment while exercising. + Keep your hands, feet and other body parts, hair, clothing, jewelry and other
objects well clear of moving parts.
+ During use, wear suitable sports clothing rather than loose or baggy clothing.
When selecting sports shoes, think about the suitability of the sole – preferably
this should be made of rubber or other non-slip materials. Shoes with heels,
leather soles, studs or spikes are not suitable. Never work out in bare feet.
+ It is also important to take note of the information given in the workout instructions
for creating a workout plan.
+ At the rst signs of weakness, nausea, dizziness, pain, diculty in breathing or
other abnormal symptoms, stop your workout immediately and, if necessary,
consult your physician.
+ Without prior agreement from your authorized contract partner, opening the
equipment is prohibited.
8
1.3 Electrical safety
+ The equipment requires a 220 - 230V / 50 Hertz mains power supply. + The equipment should be connected directly to a grounded plug socket only by
means of the power cable supplied. The use of multi-socket adapters or similar is not recommended. Extension leads must comply with local electrical safety guidelines. Always fully unwind the power cable.
+ The outlet should be secured with a fuse with a minimum value of „16 amperes,
slow“.
+ In order to reduce the risk of an electric shock, always unplug the equipment from
the mains socket immediately after your workout, before assembly or dismantling, and before maintenance or cleaning. Do not pull on the cable.
+ When plugged in, do not leave the equipment unattended at any time. To avoid
use by anyone unfamiliar with the operating instructions, the power cable should be removed when the equipment is not in use.
+ Keep the power cable away from heat, oil and sharp edges. Do not route the power
cable underneath the equipment or under a carpet or rug, and do not place any
objects on top of it.
+ Make no modications to either the power cable or the mains plug. + If the power cable or the plug are damaged or defective, contact your authorized
contract partner. Do not use the equipment in the meantime.
+ Do not keep electrical devices (e. g., mobile phones) in close proximity to the
console or the control electronics, otherwise display values (e. g., pulse measuring)
could be inaccurate.
1.4 Set-up place
+ The equipment should only be used indoors, in a suciently heated and dry area
(ambient temperature between 10°C and 35°C). The equipment should not be
used outdoors or in rooms with high humidity (over 70%) like swimming pools. The
equipment should only be stored in surroundings with an ambient temperature
between 5°C and 45°C.
+ The training room should be well ventilated during training and not be exposed to
any draughts.
+ Choose a location in which to place the equipment such that there is enough free
space/clearance to the front, the rear and to the sides of the equipment (at least
1.50 m). Furthermore, the equipment should not be set up in main entrances or on
escape routes.
+ Always keep the power cable away from hot surfaces and grounds and make sure
that the cable is not stuck somewhere or becomes a „trip hazard“.
+ No objects of any type should be inserted into the openings of the equipment.
9
+ The equipment should be placed on a level and solid surface, any unevenness in
the oor should be leveled out.
+ A oor protective mat / equipment underlay can help to protect high-quality oor
coverings (parquet, laminate, cork, carpets) from dents and sweat and can help to
level out slight unevenness.
2 ASSEMBLY INSTRUCTIONS, MAINTENANCE AND CARE
2.1 General instructions
+ Please check if all parts and tools belonging to the equipment are included in the
delivery and if there is any transport damage. If there are any complaints, please
contact your contract partner directly.
+ Some of the nuts and bolts to be used in assembly are already pre-mounted in
order to make set-up as easy as possible.
+ The equipment must be assembled by adults. In case of doubt, ask for assistance
from another person with technical skills.
+ Keep children away from the equipment during assembly, because small parts are
included in the delivery and may be swallowed.
+ Make sure that you have enough space (at least 1.50 m) in every direction during
assembly.
+ Do not leave any tools and packaging materials like plastic sheeting laying around
to avoid danger of suocation for children.
+ Assemble the equipment on an underlay mat or on the cardboard packaging in
order to avoid damage to the equipment and to the oor (scratches).
+ Before starting assembly, all individual parts should be placed on the oor next to
each other.
+ Read the assembly instructions carefully and assemble the equipment according
to the illustrations. Proceed carefully and cautiously.
+ First loosen all parts and check for their correct tting. Then tighten the screws
using a tool.
+ Modications to the design or improper repairs may pose a hazard to the user and
should not be carried out. The product warranty may be void as a result.
+ Only authorized service technicians are permitted to carry out all servicing and/or
repairs – it excludes maintenance and care.
+ Damaged or worn components may impair your safety and the lifespan of
the equipment. You should therefore immediately replace damaged or worn
components. Please contact your contract partner in such a case. The equipment
should no longer be used until it has been repaired. When needed, only use
original cardiostrong® spare parts.
10
+ Check the tightness of all screw connections once a month. + In order to be able to guarantee the constructively dened safety level of this
equipment, we recommend having the equipment regularly maintained (at least
once a year) by specialists (service technicians of your contract partner).
+ The equipment may be cleaned of dust, dirt and sweat using a damp cloth. The
use of solvents should be strictly avoided. Also, make sure that no liquids (e. g.
sweat) get into the openings of the equipment (e. g. console).
2.2 Faults and Troubleshooting
The equipment runs through regular quality controls during production. Nevertheless, errors or malfunctions on the equipment may occur. Individual parts are often the cause of faults and replacement is usually sucient. Please use the following overview to see the ve most common errors and how to repair them. If the equipment still does not work properly, please contact your contract partner.
Error Cause Repair
Cracking near the pedal
Loose pedals Tighten the pedals
Equipment wobbles Equipment is not level Adjust the supporting feet
Handlebar/saddle wobbles
Screws are loose Tighten screws
Display does not turn onPower supply disrupted Check all screw connections
and see if the plug is plugged in
No pulse reading • Sources of interference
in the room
• Using a chest strap:
- Unsuitable chest strap
- Chest strap is incorrectly positioned
- Empty batteries
• Eliminate sources of interference (e. g. mobile phone, loudspeaker, etc.)
• Use a suitable chest strap (see recommended accessories)
• Reposition the chest strap and/or moisten the electrodes
• Change the batteries
11
2.3 Maintenance and service calendar
The following routine work must be done in the specied time intervals:
Part Weekly Monthly 2x annually Annually
Display console C I
Tighten the pedals
I
Plastic covers
C I
Seat rail
I
Legends: C = cleaning; I = inspect
3 ASSEMBLY
3.1 Package contents
The package contains the parts represented in the illustration, including a power cable with mains plug. If one of the illustrated parts is missing, please contact your contract partner.
12
1
11
66
29
28
17
65
32
62
2
4
88
81
x1
x1
x1x1
x1
x1
x1
x1
x
1
x1
x1
x1
10
&
&
23
x2
47
x1
x1
15
13
3.2 Assembly instructions
Before starting assembly, look carefully through the individual assembly steps shown and assemble the equipment in the order indicated.
Step 1: Assembly of the bases
(1) Mount the front base
(4) and the rear base (2) on the main frame (1) with the help of the spacer sleeve (7), spring washer (8) and socket screw (9). (2) Turn the wheel under the foot cap in order to set the corresponding height. Tighten the screws. Mount the cover for wheel (23).
(MM)
9
M8*20L 8pcS
7
scp861D
8
D15.4 8pcs
M8*50L 4pcs
30
8
D15.4 4pcs
7
scp461D
Step 3 Step 1
9
M8*20L 4pcs
7
D16 4pcs
M5x15L 2pcs
20
Step 4
8
D15.4 4pcs
D15.4
M8*20
D16
9
7
x8
8
4
1
2
9
8
7
4
23
14
Step 2: Assembly of the saddle and seat tube
(1) Mount the seat (10) on the adjusting tube of the seat (11). (2) Mount the adjusting tube on the seat post (66) with the help of the round cross
screw (16) and quick-released knob (15). (3) The seat can be adjusted in a vertical and horizontal direction, see gure a. and b.
1
a
b
M5*10L
(x1)
16
66
10
15
11
16
10
66
D
O
W
N
U
P
15
Step 3: Assembly of the handlebar tube
(1) This assembly step should be executed by at least two persons. (2) First take the upper protective cover (28) o (see gure a). Then connect the
computer cables (72 & 73) (see gure b). (3) Insert the handlebar tube (29) on the main frame and mount this with the spacer sleeve (7), spring washer (8) and socket screw (30). Place the upper protective cover back on and mount it on the main frame.
73
72
D15.4
M8*50
D16
30
8
7
x4
28
29
a
b
30
7
8
28
29
Loading...
+ 33 hidden pages