Cardinal Health 685X User manual
CARDINAL SCALE MFG. CO.
1930-M458-O1 Rev F
203 E. Daugherty, Webb City, MO 64870 USA
Printed in USA
03/15
Ph: 417-673-4631 Fax: 417-673-2153
www.detecto.com
Technical Support: Ph: 866-254-8261 tech@cardet.com
Waist-High
Digital Bariatric Scale
Model 685X Series
Operating Instructions
1
PRECAUTIONS
Before using this product, read this manual
and pay special attention to all
"NOTIFICATION" symbols:
IMPORTANT
FCC COMPLIANCE STATEMENT
Serial Number_______________________
Date of Purchase ____________________
Purchased Form_____________________
___________________________________
___________________________________
RETAIN THIS INFORMATION FOR FUTURE USE
This equipment generates uses, can radiate radio frequency, and if not installed and used in
accordance with the instruction manual, may cause interference to radio communications. It
has been designed within the limits for a Class A computing device pursuant to Subpart J of
Part 15 of FCC rules to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area may
cause interference, in which case the user will be responsible to take whatever measures
necessary to correct the interference.
You may find the booklet “How to Identify and Resolve Radio TV Interference Problems”
prepared by the Federal Communications Commission helpful. It is available from the U.S.
Government Printing Office, Washington, D.C. 20402. Request stock No. 001-000-00315-4.
PROPER DISPOSAL
When this device reaches the end of its useful life, it must be properly disposed of. It must not
be disposed of as unsorted municipal waste. Within the European Union, this device should
be returned to the distributor from where it was purchased for proper disposal. This is in
accordance with EU Directive 2002/96/EC. Within North America, the device should be
disposed of in accordance with the local laws regarding the disposal of waste electrical and
electronic equipment.
It is everyone’s responsibility to help maintain the environment and to
reduce the effects of hazardous substances contained in electrical and
electronic equipment on human health. Please do your part by making
certain that this device is properly disposed of. The symbol shown to the
right indicates that this device must not be disposed of in unsorted municipal
waste programs.
COPYRIGHT
All rights reserved. Reproduction or use, without expressed written permission, of editorial or
pictorial content, in any manner, is prohibited. No patent liability is assumed with respect to
the use of the information contained herein.
DISCLAIMER
While every precaution has been taken in the preparation of this manual, the Seller assumes
no responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from use of the information contained herein. All instructions and diagrams have been
checked for accuracy and ease of application; however, success and safety in working with
tools depend to a great extent upon the individual accuracy, skill and caution. For this reason
the Seller is not able to guarantee the result of any procedure contained herein. Nor can they
assume responsibility for any damage to property or injury to persons occasioned from the
procedures. Persons engaging the procedures do so entirely at their own risk.
1930-M458-O1 Rev-F Waist-High 685X Series
2
6856 / 6856KGEU
6855 / 6855KGEU
6854DHR / 6854KGEUDHR
6857DHR / 6857KGEUDHR
1930-M458-O1 Rev-F Waist-High 685X Series
3
INTRODUCTION
6855
6855KGEU
6856
6856KGEU
Capacity:
600 lb x .2 lb or
270 kg x .1 kg
(selectable)
300 kg x 0.1 kg
or
350 kg x 0.2 kg
1000 lb x .2 lb or
450 kg x .1 kg
(selectable)
300 kg x 0.1 kg
or
350 kg x 0.2 kg
Platform Size:
18” x 14” / 46 cm x 36 cm
24” x 24” / 61 cm x 61 cm
Shipping Weight:
70 lb / 32 kg
85 lb / 39 kg
Height Rod:
30” to 78” x 0.1 in (76 cm to 200 cm x 0.1 cm)
Display:
Six digit, Seven segment, 0.7 inch (17.8 mm) high LCD
Power:
6 “AA” size Alkaline, Ni-Cad or NiMH batteries (not included) OR an
optional 100 to 240 VAC 50/60Hz 12 VDC 1A wall plug-in UL/CSA
listed AC power adapter (Cardinal part number 6800-1045).
Keyboard:
Membrane type with 5 keys, On/Off, Lock/Release, Units, Zero,
BMI/Enter and 4 directional arrows
6854DHR
6854KGEUDHR
6857DHR
6857KGEUDHR
Capacity:
600 lb x .2 lb or
270 kg x .1 kg
(selectable)
300 kg x 0.1 kg
or
350 kg x 0.2 kg
1000 lb x .2 lb or
360 kg x .1 kg
(selectable)
300 kg x 0.1 kg
or
350 kg x 0.2 kg
Platform Size:
18” x 14” / 46 cm x 36 cm
24” x 24” / 61 cm x 61 cm
Shipping Weight:
74 lb / 34 kg
85 lb / 39 kg
Digital Height Rod:
43” to 79” x 0.1 in (110 cm to 200 cm x 0.1 cm)
Display:
Weight: 5 digit, seven segment, 7/8” (22.23 mm) high LCD
Height: 4 digit, seven segment, 1/2" (12.7 mm) high LCD
BMI: 3 digit, seven segment, 1/2" (12.7 mm) high LCD
ID: 14 digit, 14 segment, .35” (8.89 mm) high LCD
Power:
6854DHR / 6857DHR: 6 “C” cell Alkaline, Ni-Cad or NiMH batteries (not
included) OR an optional 12 VDC 1.25A wall plug-in AC power adapter
(Cardinal part number MV1PWR).
6854KGEUDHR / 6857KGEUDHR: 6 “C” cell Ni-Cad or NiMH batteries
(not included) OR an optional 12 VDC 1.25A wall plug-in AC power
adapter (Cardinal part number MV2PWR).
Keys:
Membrane type with 19 keys, On/Off, Zero, Units, Lock/Release,
Net/Gross, Tare, ID/Height, Clear, Print/Enter and 0-9 Numeric Keys
Thank you for purchasing our Waist-High Digital Bariatric Scale. It has been manufactured
with quality and reliability and has been tested before leaving our factory to insure accuracy
and dependability for years to come.
This manual is provided to guide you through the operation of your scale. Please read it
thoroughly before attempting to operate your scale and keep it handy for future reference.
SPECIFICATIONS
1930-M458-O1 Rev-F Waist-High 685X Series
4
UNPACKING INSTRUCTIONS
Remove staples or cut along bottom of carton. Lift carton off pallet.
Check for any damage incurred in shipping. If scale has been damaged, place a claim
with the carrier. It is the responsibility of the purchaser to file all claims for any damages
or loss incurred during transit. Use the original carton and shipping material to return
the scale.
Cut packing straps securing scale to pallet.
To remove scale from pallet, at the back of the scale lift up with equal force from the
column and at the platform base near the wheels on the scale. Set gently on floor.
Remove all plastic wrapping, foam fillers and cardboard material from the scale.
Remove and unpack the AC power adapter and cord, if the scale was ordered with this
option.
Install the batteries or if ordered with the scale, plug the small connector end of the AC
power adapter cord into the power jack located on the back of the indicator, then plug
the AC power adapter into an appropriate power receptacle.
WARNING! DO NOT connect an AC power adapter to the indicator if alkaline
batteries are installed.
Install the indicator on the scale bracket on the column and then connect the load cell
cable to the indicator.
NOTE: For additional information on installing the batteries (or the AC power adapter),
mounting the indicator on the scale bracket and connecting the load cell cable;
Refer to the 750 Weight Indicator Owner’s Manual (8555-M483-O1) for the 6855,
6855KGEU, 6856 or 6856KGEU.
Refer to the MedVue MV1 Owner’s Manual (8555-M512-O1) for the 6854DHR or
6857DHR.
Refer to the MedVue MV2 Owner’s Manual (8555-0530-0M) for the 6854KGEUDHR
or 6857KGEUDHR.
CARE AND CLEANING OF SCALE
DO NOT subject the platform to sudden shocks.
DO NOT submerge indicator in water, pour or spray water directly on indicator.
DO NOT use acetone, thinner or other volatile solvents for cleaning.
DO NOT expose scale to temperature extremes.
DO NOT place scale in front of heating/cooling vents.
DO NOT place scale in an area where it might be exposed to moisture.
DO NOT operate the keypad with pointed objects (pencils, pens, etc.). Damage to
keypad resulting from this practice is NOT covered under warranty.
DO clean the indicator with a damp soft cloth and mild non-abrasive detergent.
DO remove power before cleaning with a damp cloth.
DO provide clean AC power and adequate protection against lightning damage.
DO keep the surroundings clear to provide clean and adequate air circulation.
1930-M458-O1 Rev-F Waist-High 685X Series
5
OPERATION
750 Keypad
6855, 6855KGEU, 6856 or 6856KGEU
ALWAYS assist the patient in stepping on and off the scale platform to
ensure they do not fall. NEVER leave a patient unattended while they are on
the scale platform. Failure to maintain control of the patient at all times can
result in serious injury to you and/or the patient.
To Weigh
1. Set scale on any hard, level, flat
surface or low-cut carpet.
2. Press ON / OFF key to turn on
indicator.
3. Press ZERO key to zero weight
display. The ZERO and lb or kg
annunciator will turn on to show that
scale is ready for use.
4. Place patient on scale and read weight
display.
5. Remove patient from scale.
Zero Weight Display
1. If the indicator is not showing zero
weight on the display, press ZERO
key.
2. Weight display will return to zero.
ZERO, STABLE and lb or kg
annunciators will turn on to show a
stable, center-of-zero weight condition.
Metric Conversion
Press UNITS key to toggle between pounds and kilograms. Note that lb or kg annunciator
will turn on to show which weighing unit is active.
To Weigh and Calculate BMI
1. Press ON / OFF key to turn on indicator.
2. Press ZERO key to zero weight display. The ZERO and lb or kg annunciator will turn
on to show that scale is ready for use.
3. Place patient on scale and read weight display.
4. Press BMI / ENTER key.
5. If pounds is the active weighing unit, display will change to show 5
6 blinking. (The blinking character is the position to be changed).
a. Press or keys until desired height in inches is displayed and then press
or key to move the blinking character to FEET.
b. Press or keys until desired height in feet is displayed.
c. Proceed to Step 7.
FEET
, 6
INCHES
with the
6. If kilograms is the active weighing unit, display will change to show 170 cm.with the 0 of
170 blinking. (The blinking character is the position to be changed)...
a. Press or keys until the desired number is displayed.
b. Press or key to move to next character to change.
c. Repeat steps A and B until the desired height in centimeters is displayed.
d. Proceed to Step 7.
7. Press BMI / ENTER key.
8. Read BMI on display.
9. Remove patient from scale.
10. Press BMI / ENTER key to return to weighing operation.
1930-M458-O1 Rev-F Waist-High 685X Series
6
OPERATION, CONT.
6854DHR, 6854KGEUDHR, 6857DHR or 6857KGEUDHR
MedVue Keypad
ALWAYS assist the patient in stepping on and off the scale platform to
ensure they do not fall. NEVER leave a patient unattended while they are on
the scale platform. Failure to maintain control of the patient at all times can
result in serious injury to you and/or the patient.
To Weigh
1. Set scale on any hard, level, flat surface or low-cut carpet.
2. Press ON/OFF key to turn the indicator on.
3. Press ZERO key to zero weight display. ZERO, GROSS and lb or kg annunciator will
turn on to show that the scale is ready for use.
4. Place patient on scale and read weight display.
5. If a printer is connected to scale, press PRINT/ENTER key to print a ticket.
6. Remove patient from scale.
Zero Weight Display
1. In Gross Weight mode (GROSS annunciator on), press ZERO key.
2. Weight display will return to zero. ZERO and STABLE annunciators will turn on to
show a stable, center-of-zero (0) gross weight condition.
Metric Conversion
Press the UNITS key to toggle between pounds and kilograms. The lb or kg annunciator
will turn on to show the weighing unit selected. In addition, the height units will change
from feet/inches to centimeters. NOTE: This is only available if configured in Calibration
Setup.
1930-M458-O1 Rev-F Waist-High 685X Series
7
OPERATION, CONT.
6854DHR, 6854KGEUDHR, 6857DHR or 6857KGEUDHR
To Weigh and Calculate BMI
Manually Entering Height
1. Press ON/OFF key to turn the indicator on.
2. Press ZERO key to zero weight display. ZERO, GROSS and lb or kg annunciator will
turn on to show scale is ready for use.
3. Perform tare operation if required. Refer to Push Button Tare or Tare Weight Entry in
previous section for instructions on using tare.
4. Press ID/HEIGHT key.
5. If Centimeters was selected for HEIGHT UNITS in setup, the display will change to show
CENTIMETERS.
a. Use numeric keys to enter up to 4 digits (# # # . #) for height in centimeters and
then press PRINT/ENTER key.
6. If Millimeters was selected for HEIGHT UNITS in setup, display will change to show
MILLIMETERS.
a. Use numeric keys to enter up to 4 digits (# # # #) for height in millimeters and then
press PRINT/ENTER key.
7. Place patient on the scale.
8. Read weight and BMI displays.
9. If a printer is connected to scale, press PRINT/ENTER key to print a ticket. Note that
BMI and height display will clear when ticket prints.
10. Remove patient from scale.
11. If a printer is not connected to scale, BMI display will clear when patient is removed from
scale and weight returns to zero.
1930-M458-O1 Rev-F Waist-High 685X Series
Loading...