Cardinal Detecto 459-CH, Detecto 8432-CH, Detecto 8432-CHKGEU Owner's Manual

PEDIATRIC SCALE

Models 459-CH, 8432-CH

and 8432-CHKGEU

Owner’s Manual

CARDINAL SCALE MFG. CO.
8525-M178-O1 Rev F

PO BOX 151 v WEBB CITY, MO 64870

Printed in USA

11/07

PH [phone] v FAX [phone]

www.detectoscale.com

Technical Support: Ph: 866-254-8261 v [e-mail]

8525-M178-O1 v 459-CH and 8432-CH

Page 2

8525-M178-O1 v 459-CH and 8432-CH

Page 1

INTRODUCTION

Thank you for purchasing our Detecto Pediatric Scale, Model 459-CH, 8432-CH or 8432­CHKGEU. Your scale was built with Detecto quality and reliability at our factory in Webb City,
Missouri. This manual will guide you through setup and operation of your scale. Please read it
thoroughly before attempting to operate your scale and keep it handy for future reference.

SPECIFICATIONS

459-CH

Capacity: …..………………… 40 lb x 1/2 oz (17 1/2 kg x 10 g)

8432-CH*

Capacity: …………………….. 44 lb x .05 oz (20 kg x .02kg)
Power Requirements: …..….. 6 “AA” size Alkaline, Ni-Cad or NiMH batteries (not

included) OR an optional 100 to 240 VAC 50/60Hz 12 VDC
1A wall plug-in UL/CSA listed AC power supply.

Operating Temperature: ….... 14 to 104 ºF (-10 to +40 ºC)

8432-CHKGEU**

Capacity: …………………….. 44 lb x .05 oz (20 kg x .02kg)
Power Requirements: …..….. 6 “C” size Ni-Cad or NiMH batteries (not included) OR an

optional 115 VAC 50/60Hz 12 VDC 300 mA wall plug-in
UL/CSA listed power supply. (Also available for 230 VAC
50/60 Hz).

Operating Temperature: ….... 14 to 104 ºF (-10 to +40 ºC)

* For more information on the indicator used on the 8432-CH, refer to the 750 Weight

Indicating Instrument Owner’s Manual, 8555-M260-O1.

** For more information on the indicator used on the 8432-CHKGEU, refer to the 758CSV

Weight Indicating Instrument Owner’s Manual, 8555-M433-O1.

FCC COMPLIANCE STATEMENT
WARNING! The Model 8432-CH generates uses and can radiate radio frequency energy and

if not installed and used in accordance with the instructions manual, may cause interference to
radio communications. It has been tested and found to comply with the limits for a Class A
computing device pursuant to Subpart J of Part 15 of FCC rules, which are designed to provide
reasonable protection against such interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause interference in which case
the user, at his own expense, will be required to take whatever measures may be required to
correct the interference.

You may find the booklet "How to Identify and Resolve Radio TV Interference Problems" prepared by the Federal
Communications Commission helpful. It is available from the U.S. Government Printing Office, Washington, D.C.
20402, Stock No. 001-000-00315-4.

All rights reserved. Reproduction or use, without express permission, of editorial or pictorial
content, in any manner, is prohibited. No patent liability is assumed with respect to the use of
the information contained herein. While every precaution has been taken in the preparation of
this book, we assume no responsibility for errors or omissions. Neither is any liability assumed
for damages resulting from the use of the information contained herein. All instructions and
diagrams have been checked for accuracy and ease of application; however, success and
safety in working with tools depend, to a great extent, upon the individual accuracy, skill and
caution. For this reason, we are not able to guarantee the result of any procedure contained
herein. Nor can we assume responsibility for damage to property or injury to persons
engaging the procedures do so entirely at their own risk.

8525-M178-O1 v 459-CH and 8432-CH

Page 2

CARE and CLEANING of SCALE

 DO NOT subject the platform (child seat) to sudden shocks.

 DO NOT expose scale to temperature extremes.

 DO NOT place scale in front of heating/cooling vents.

 DO NOT place scale in areas where it might be exposed to moisture.

 DO NOT submerge scale in water, pour or spray water directly on head assembly or

indicator.

 DO NOT use an abrasive cleaner, acetone or other volatile solvents for cleaning head

assembly, indicator, platform base or child seat.

v

DO clean the head assembly, indicator or platform base with a damp soft cloth and mild

non-abrasive detergent.

v

DO clean the child seat with a soft cloth dampened with a mild detergent. The child

seat may be removed and washed with a mild detergent.

v

DO remove power on 8432-CH or 8432-CHKGEU before cleaning with a damp cloth.

v

DO provide clean AC power and adequate protection against lightning damage for

8432-CH or 8432-CHKGEU.

PRECAUTIONS

Before using this instrument, read this
manual and pay special attention to all
"WARNING" symbols:

IMPORTANT ELECTRICAL

WARNING

SERIAL NUMBER ____________________

DATE OF PURCHASE ________________

PURCHASED FROM _________________

___________________________________

___________________________________

RETAIN THIS INFORMATION FOR FUTURE USE

8525-M178-O1 v 459-CH and 8432-CH

Page 3

UNPACKING INSTRUCTIONS

Carefully unpack scale components from the shipping carton. Examine the scale and baby
seat for any damage that may have taken place during shipment. If you find evidence of
shipping damage, the shipping company should be contacted at once. It is a good idea to
keep the scale shipping carton and packing material for later use should storage or transport of
the scale become necessary.

SEAT

GIMBAL

COLUMN and

HEAD ASSEMBLY

CHILD

SEAT

PLATFORM

BASE

COLUMN

and
INDICATOR
MOUNTING

BRACKET

ASSEMBLY

750 INDICATOR

(8432-CH) or

758CSV

INDICATOR

(8432-CHKGEU)

CHILD

SEAT

PLATFORM

BASE

SEAT

GIMBAL

8525-M178-O1 v 459-CH and 8432-CH

Page 4

CHILD SEAT INSTALLATION

Before using the scale, it will be necessary to install the child seat. Follow the steps listed
below to install the child seat.

PARTS LIST TOOLS REQUIRED

(1) Child Seat #1 Philips
(1) Gimbal
(4) 1/4-20 x 1/2” Truss head screws
(4) #10-24 x 1/2” Truss head screws

1. Remove child seat and hardware kit (plastic
bag with screws) from box.

2. Remove child seat gimbal from packing.

3. Remove mounting screws from plastic bag.

4. Determine which direction child seat is to face, left or right side of scale or forward
(away from beam or indicator) and place gimbal on scale.

1/4-20 x 1/2” screws

(gimbal to platform)

#10-24 x 1/2” screws

(seat to gimbal)