Card Guard scientific survival ACT1ACT3 Users Manual

ACT Patient Guide

This user guide includes information and instructions about the
ACT (Continuous ECG Monitor and Arrhythmia Detector, and monitor with
software application) and will help familiarize you using the ACT system,
so please take a moment to read it carefully before you begin testing.

Note: This manual is for ACT Monitor Application version 5.4, ACT 1L

Sensor version 0.1G and ACT Sensor 3L version 1.0.4

IMPORTANT

First time use – The patient must call the service provider to receive

instructions on how to proceed for the first time use.
The first time the ACT system is activated and is attached to the patient

there will be displayed screens not seen in regular use. These screens are
calibration procedures the ACT system needs to perform to adjust its
operation to the patient. Please read the Caution on page 36, for more
details.

CAUTION:

Place used batteries in the kit that you have received from

If you have any questions regarding the ACT please refer to your
representative.

your service provider and make sure they will be returned
to your service provider.

IMPORTANT

This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including

interference that may cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.

1