Caraudio-Systems TF-MIB-O User Manual

TF-MIB-O

Take down the SW-version and
HW-version of the interface boxes,
and store this manual for support
purposes.

HW______________

SW______________

Delivery contents

TV-Free

Video-in-motion Interface

TF-MIB-O

Compatible with

Audi, Volkswagen and Skoda

with

MIB 1/2/3 navigation systems

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. This product should only
be used while standing or to display fixed menus or rear-view-camera video when the
vehicle is moving, for example the MP3 menu for DVD upgrades.

Changes/updates of the vehicle’s software can cause malfunctions of the interface. We
offer free software-updates for our interfaces for one year after purchase. To receive a free
update, the interface must be sent in at own cost. Labor cost for and other expenses
involved with the software-updates will not be refunded.

Version 17.09.2020 TF-MIB-O

LED

Status

Explication

Blue

Flashes

Coding process is running

Green

Lights

Coding procedure successfully completed

Red

Lights

Remove coding procedure successfully completed

Flashes

Coding process failed / license violation

Green + Red

Lights

CAN Communication Error! - Abort of the diagnostic session

Requirements

Vehicle Audi, Skoda, Volkswagen

Navigation MIB 1, MIB 2, MIB3, MMI Navigation plus with MMI touch response

Limitations

License The OBD-coder can only be used in one vehicle (after use in a

vehicle the using in other vehicles is blocked)

Check compatibility of vehicle and accessories

Installation

1. Locate OBD-port and remove cover (for Audi vehicles with MMI navigation plus with
MMI Touch Response, the vehicle hood must also be opened)

2. Turn on ignition (position 2, don´t start the engine)

3. Wait until the head-unit has booted

4. Plug coder into OBD-port

5. Leave coder for about 30 seconds in OBD-port

6. Remove coder from the OBD-port

To reverse the coding repeat steps 1.-6.
After the first use on a vehicle, the coder TF-MIB-O is personalized to this vehicle and can be
used unlimited times to code or reverse coding on this vehicle.

LED information:

Version 17.09.2020 TF-MIB-O