Caraudio-Systems c.LOGiC C2-CCC, c.LOGiC C2-CIC User Manual
Version 22.03.2011 C2-CCC/C2-CIC
c.LOGiC interfaces
C2-CCC
C2-CIC
for BMW Professional navigation systems
with iDrive and 6.5”/8.8” monitor
Product features
• Full plug and play multimedia interface
• 2 AV-inputs with separate IR-control channels
• control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, …
• after-market rear-view camera input
• automatic or manual switching to after-market rear-view camera input (only from
interface mode)
• rear-view camera power (+12V max 1A)
• rear-seat-entertainment video output
• power-on remote-out trigger-signal (+12V max 1A) to switch on connected devices
• video-in-motion
Version 22.03.2011 C2-CCC/C2-CIC
Page1
Contents
1. Prior to Installation
1.1. Delivery contents
1.2. Check compatibility of vehicle and accessories
1.3. Setting the dip switches of the CAN-box TV-436
1.4. Setting the dip switches of the MOST®-box C2C-M336
1.4.1. Rear-view camera
1.4.2. Deactivating c.LOGiC AV2 input
2. Connection schema
3. Installation
3.1. Interconnecting interface-boxes and interface-harnesses
3.2. Removal of navigation computer CCC/CIC
3.3. Quadlock connector
3.4. Connecting peripheral devices
3.4.1. AV-source(s)
3.4.2. Installing AV-source’s IR-sensor additionally
3.4.3. After-market rear-view camera and rear-seat-entertainment
4. Operation
4.1. Activation of the video-in-motion function
4.2. Selecting the c.LOGiC as current AV-source
4.3. Assigning device control
4.4. Using device control
4.5. Button assignment table iDrive
5. Specifications
6. Technical support
Appendix A – Device control table
Legal Information
By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. This product should only
be used while standing or to display fixed menus or rear-view-camera video when the
vehicle is moving, for example the MP3 menu for DVD upgrades.
Changes/updates of the vehicle’s software can cause malfunctions of the interface. We offer
free software-updates for our interfaces for one year after purchase. To receive a free
update, the interface must be sent in at own cost. Labor cost for and other expenses
involved with the software-updates will not be refunded.
Version 22.03.2011 C2-CCC/C2-CIC
Page2
1. Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The
place of installation must be free of moisture and away from heat sources.
1.1. Delivery contents
The C2-CCC package for older one/two button iDrive contains harness C3C-BMW02. The C2CIC package for newer 8-button iDrive contains harness C3C-BMW03. The harness will be
referred to as C3C-BMW0x in this manual.
If remote function of the interface should be used, additional IR-remote cables and
Y-adapters are needed, see chapter AV-source(s) .
1.2. Check compatibility of vehicle and accessories
Requirements
Vehicle 1series (E87) only CCC, 3series (E90/91/92), 5series
(E60/61), 6series (E63/64), 7series (E65/66), X5 (E70), X6
(E71), Z4 (E89)
Navigation Navigation system Professional CCC (older 1/2-button iDrive
or CIC (newer 8-button iDrive) with 6.5” or 8.8” monitor
Limitations
factory-TV-tuner Must NOT be installed. If uninstalled, fibre optical ring must
be closed.
After-market rear-view cam Automatic switching to camera only from dvbLOGiC mode.
CAN-box
TV-436
HW_____
SW _____
Take down the SW-version and HW-version of the interface boxes, and store this
manual for support purposes.
MOST®-box
C2C-M336 HW_____ SW_____
Harness
C3C-BMW02/
C3C-BMW03
Harness C2C-IR
Version 22.03.2011 C2-CCC/C2-CIC
Page3
1.3. Setting the dip switches of the CAN-box TV-436
1.4. Setting the dip switches of the MOST®-box C2C-M336
The default dip switch settings of the MOST®-box
need to be changes ONLY if an after-market
rear-view camera shall be connected or if AV2 of
the c.LOGiC shall be deactivated. The dip
switches are located inside the MOST®-box.
For changes it is necessary to open the box.
Default settings are:
dip1 = ON, dip2 = OFF, dip3 = OFF
1.4.1. Rear-view camera
If a rear-view camera shall be or is connected, in order for the
c.LOGiC to automatically switch to its camera input,
set dip2 = ON (up).
Note: Automatic switching to after-market rear-view camera works
only from interface mode.
1.4.2. Deactivating c.LOGiC AV2 input
If only one AV-source shall be connected to the c.LOGiC, we recommend
to disable AV2, to avoid customers switching by mistake to black/no
picture of AV2. In order to disable the AV2 input of the c.LOGiC,
set dip1 = OFF (down).
Note: Additional measures relating to the deactivation of AV2 are described in chapter
Assigning device control .
Vehicles with CIC dip 1 ON, dip 2 OFF, dip 3 OFF
Vehicles with CCC dip 1 OFF, dip 2 OFF, dip 3 OFF
Dip switches
of MOST®-box
Loading...