In das Fahrzeug-Infotainment integrierte Bluetooth®-Freisprecheinrichtung
Version 13.09.2010
Page 2
Seite2
Inhaltsverzeichnis
1. Vor der Installation
1.1. Lieferumfang
1.2. Überprüfung der Freisprecheinrichtungs-Kompatibilität mit Fahrzeug und
Zubehör
2. Installation
2.1. Installationsort
2.2. Ausbau der Navigationseinheit
2.3. Aktivierung der Freisprecheinrichtung
3. Bedienung
3.1. Paarung und Verbindung der blueLOGiC® Freisprecheinrichtung mit dem
Mobiltelefon
3.2. Einlesen des Telefonbuchs
3.3. Telefonbedienung über die Headunit
3.4. Telefon- und Zusatzfunktionen durch Multifunktionslenkrad und FIS
3.4.1. Telefonbuch
3.4.2. Direktruf
3.4.3. SMS-Funktionen (lesen und schreiben)
3.4.4. A2DP - Audio Streaming
3.4.5. MFA+ - fahrzeugspezifische Daten
3.4.6. MFA PDC – Abstandsinformationen der Parksensoren
3.4.7. Einstellungen der blueLOGiC® Freisprecheinrichtung
3.4.8. Version der blueLOGIC® Freisprecheinrichtung
3.5. Einstellungen, Werkseinstellung, Update
4. Technische Daten
5. Technischer Support
Hinweis
Veränderungen der Fahrzeugsoftware können die Funktionsfähigkeit der Freisprecheinrichtung beeinträchtigen. Softwareupdates für Freisprecheinrichtungen werden Kunden bis
zu einem Jahr nach Erwerb der Freisprecheinrichtung kostenlos gewährt. Zum Update muss
die Freisprecheinrichtung frei eingeschickt werden. Kosten für Ein- und Ausbau werden nicht
erstattet.
Version 13.09.2010 BT-VW01
Page 3
Seite3
HW ________ SW ________
SW-Stand und HW-Stand der Freisprecheinrichtungs-Box notieren. Manual
aufbewahren für Support-Zwecke!
Produktfeatures
Integration in und Steuerung über die Telefonschnittstelle des Werks-Infotainment
Updatefähiger Parrot Chipsatz mit bester Sprachqualität und hoher Kompatibilität
Automatische Radiostummschaltung bei Anruf
Gesprächsaudio über Soundsystem des Fahrzeugs, regelbare Lautstärke
Externes Mikrofon mit Verstärkungseinstellung über das Fahrzeug-Infotainment
A2DP Audio Streaming (nur in Fahrzeugen mit MFA-Display; A2DP muss vom
Mobiltelefon unterstützt werden)
Bis zu 10 Mobiltelefone können gleichzeitig gepaart sein
Nutzung der Werks-Radio/-Navigationstasten zur Telefonfunktionssteuerung
Integration des Mobiltelefonbuchs (ca. 1000 Rufnummern)
Audio-Einstellungen über das Fahrzeug-Infotainment
SMS-Funktionen (muss vom Mobiltelefon unterstützt werden)
Mehrsprachige Unterstützung durch das FIS Display und automatische
Landessprachenerkennung
MFA+ Anzeigen (Voraussetzung: FIS Display)
1. Vor der Installation
Vor der Installation sollte dieses Manual durchgelesen werden. Für die Installation sind
Fachkenntnisse notwendig. Der Installationsort der Freisprecheinrichtung muss so gewählt
werden, dass es weder Feuchtigkeit noch Hitze ausgesetzt ist.
1.1. Lieferumfang
Version 13.09.2010 BT-VW01
Page 4
Seite4
Voraussetzungen
Fahrzeug VW, Skoda, Seat
Navigation/ Radio RCD510 Radiosystem RNS510 Navigationssystem
Columbus Navigationssystem
Trinax Navigationssytem
Andere Navigations--/ Radiosysteme mit FIS Display
Einschränkungen
Werks-Telefonmodul muss, falls vorhanden, deinstalliert werden
FIS rotes Display (weiß wird nicht unterstützt)
A2DP Funktioniert nur in Fahrzeugen mit MFA-Display.
1.2. Überprüfung der Freisprecheinrichtungs-Kompatibilität mit Fahrzeug und Zubehör
2. Installation
Zündung ausstellen und Fahrzeugbatterie nach Werksangaben abklemmen!
Darf gemäß Werksangaben die Fahrzeugbatterie nicht abgeklemmt werden,
reicht es in den meisten Fällen aus, das Fahrzeug in den Sleep-Modus zu
versetzen. Sollte dieses nicht funktionieren, kann die Fahrzeugbatterie mit
einer Widerstandsleitung abgeklemmt werden.
Die Freisprecheinrichtung benötigt Dauerstrom. Kommt die Spannungsversorgung nicht direkt von der Fahrzeugbatterie, muss überprüft werden, ob
die Spannungsversorgung dauerhaft und startstabil ist.
2.1.Installationsort
Die Freisprecheinrichtung wird an der Rückseite der Navigationseinheit verbaut.
2.2. Ausbau der Navigationseinheit
Navigationseinheit entriegeln und ausbauen.
Version 13.09.2010 BT-VW01
Page 5
Seite5
Quadlock-Stecker
Quadlockbuchse des Fahrzeugkabelbaums aus der Navigationseinheit ausstecken. Quadlockbuchse des Freisprecheinrichtung
Kabelsatzes in der Navigationseinheit verriegeln.
Quadlockbuchse des Fahrzeugkabelbaumes im Quadlockstecker
des Interface Kabelsatzes verriegeln.
Mikrofon in der Nähe des Fahrers platzieren. 2 Pin AMP-Stecker des Mikrofons in die 2 Pin
AMP-Buchse des blueLOGiC® Kabelsatzes einstecken.
2.3. Aktivierung der Freisprecheinrichtung
Nach der Installation der Freisprecheinrichtung muss das Fahrzeug zur Einbindung der neuen
Hardware in den Ruhezustand versetzt werden, damit die Telefonoption aktiviert wird. Dazu
nach dem Wiederanschluss der Batterie Fahrzeug abschließen und 5-10 Minuten warten.
3. Bedienung
Bei Fahrzeugen mit RCD510 oder RNS510 kann die blueLOGiC® Freisprecheinrichtung über
das Telefonmenü der Headunit gesteuert werden. Bei Fahrzeugen mit FIS ist es möglich, die
blueLOGiC® Freisprecheinrichtung über die Tasten des Multifunktionslenkrads in Verbindung
mit dem FIS-Telefonmenü zu steuern. Hat ein Fahrzeug eine Headunit und FIS, sind beide
Steuerungsvarianten möglich. Die Steuerung über FIS bietet im Vergleich zur Steuerung über
die Headunit zusätzliche Funktionen. Manche Einstellungen können durch das Wählen von
Anrufcodes, die auf jeden Fall für nachgerüstete RCD510/RNS510 ohne FIS benötigt werden,
verändert werden.
3.1. Paarung und Verbindung der blueLOGiC® Freisprecheinrichtung mit dem
Mobiltelefon
Es können bis zu 10 Mobiltelefone gleichzeitig mit der blueLOGiC® Freisprecheinrichtung
gepaart sein. Wird ein 11. Mobiltelefon gepaart, so wird der älteste Paarungseintrag
gelöscht. Evtl. muss zur korrekten Funktion das Fahrzeug, wie unter 2.3. beschrieben, in den
Ruhezustand versetzt werden. Die Paarung zwischen Mobiltelefon und
Freisprecheinrichtung über die entsprechende Menüebene des Mobiltelefons aktivieren
(siehe Anleitung des Mobiltelefonherstellers). Suchen nach „blueLOGiC®“oder „CK5050N“
und verbinden mit Aktivierungscode „1234“. Manche Mobiltelefone versuchen sich mit einer
anderen Funktion als „Freisprechen“ mit der blueLOGiC ® Freisprecheinrichtung zu
verbinden. Diese Einstellung überprüfen und Einstellung evtl. auf „Freisprechen“ umstellen
(siehe Anleitung des Mobiltelefonherstellers).
Version 13.09.2010 BT-VW01
Page 6
Seite6
Die Freisprecheinrichtung nutzt die
Telefonschnittstelle des Werks-Navigationssystems/-Radios. Die Bedienung entspricht
von daher grundsätzlich der im Handbuch
des jeweiligen Systems beschriebenen
Bedienung.
RNS510
Ist ein Mobiltelefon mit der blueLOGiC® Freisprecheinrichtung gepaart (Voraussetzung:
Paarung, wie oben beschrieben, ist erfolgt), wird - wenn das Mobiltelefon in die Reichweite
der blueLOGiC® Freisprecheinrichtung kommt - automatisch eine Verbindung hergestellt.
Sind mehrere gepaarte Mobiltelefone in Reichweite, so ist die blueLOGiC® Freisprecheinrichtung immer mit dem zuerst in Verbindung gesetzten Mobiltelefon verbunden.
Sollten Probleme bei der Verbindung eines Mobiltelefons mit der blueLOGiC® Freisprecheinrichtung auftreten, sollte zuerst auf der Parrot-Internetseite nachgeschaut werden, ob
ein Update für den Parrot Chip verfügbar ist. Die Versionsnummer des Parrot-Chips finden
sie unter den Technischen Daten am Ende dieses Manuals.
3.2. Einlesen des Telefonbuchs
Nach jeder Verbindungsherstellung mit einem Mobiltelefon, wird das Telefonbuch des
Mobiltelefons neu in das Fahrzeug-Infotainment eingelesen. Je nach Mobiltelefon wird der
Telefonspeicher und/oder der SIM-Kartenspeicher eingelesen. Dieser Vorgang kann einige
Minuten dauern. Sollte das Telefonbuch nicht automatisch oder komplett eingelesen
werden, ist es unter Umständen nötig, die Kontakte aus dem SIM-Kartenspeicher in den
Telefonspeicher des Mobiltelefons zu kopieren!
Bei einigen Mobiltelefonen erfolgt die Telefonbuchübertragung nicht automatisch, sondern
muss manuell über das Mobiltelefon an die blueLOGiC® Freisprecheinrichtung gesendet
werden. (die Vorgehensweise ist ebenfalls abhängig vom Mobiltelefon, z.B. „Telefonbuch an Bluetooth senden“).
Die manuelle Übertragung muss nach Änderungen der Kontakte am Mobiltelefon zur
Aktualisierung wiederholt werden.
Der Speicher der blueLOGiC® Freisprecheinrichtung kann ca. 1000 Rufnummern speichern.
3.3. Telefonbedienung über die Headunit
Version 13.09.2010 BT-VW01
Page 7
Seite7
Durch Drücken der
Menü-Taste des
Multifunktionslenkrads
wechselt das FIS die
verschiedenen Menüs
(Radio, Navigation,
Telefon,…). Ist die
blueLOGIC® Freisprecheinrichtung
installiert, zeigt das
Telefon-Menü den
blueLOGIC®-Startbild-
Schirm.
Die Signalstärke des
Mobiltelefons wird
durch die Balken obenim Startbildschirm
angezeigt. Das
blueLOGIC®-Hauptmenü wird durch
Betätigen der “Up andDown-Tasten” auf demMultifunktionslenkradangezeigt.
Die Funktionen des blueLOGIC®-Hauptmenüs im FIS sind
in den Kapiteln 3.3.1. bis 3.3.8. beschrieben.
Die Telefonbucheinträge der
gespeicherten
Rufnummern können
im Telefonbuchmenü
ausgewählt werden.
Es werden für jeden
Kontakt die
gespeicherten
Nummern einzeln infestgelegter
Reihenfolge (Büro,
Mobil, Privat,…)
angezeigt. Ist ein
Eintrag ausgewählt,wird dieser einzeln
mit Anrufoption
angezeigt.
Die im Mobiltelefon gespeicherten
Direktrufnummern können im Menü
Direktruf ausgewählt werden.
3.4. Telefon- und Zusatzfunktionen durch Multifunktionslenkrad und FIS
3.4.1. Telefonbuch
3.4.2. Direktruf
3.4.3. SMS - Funktionen (lesen undschreiben)
Die blueLOGIC® Freisprecheinrichtung unterstützt lesen und schreiben von SMS unter dem
Menüpunkt SMS, falls das Mobiltelefon diese Funktion unterstützt. Dort sind einige
Standardantwort-vorlagen auswählbar.
Version 13.09.2010 BT-VW01
Page 8
Seite8
Bei aktiviertem A2DP – Audio Streaming der blueLOGiC® Freisprech-
einrichtung ist es möglich, Musik-Files mit dem Mobiltelefon über
das Werks-Soundsystem des Fahrzeugs abzuspielen. Die möglichen
Steuerungsoptionen der Audiowiedergabe des Mobiltelefons über
das Werks-Navigationssystem hängen von der Software des
Mobiltelefons ab, z.B. unterstützen iPhones® keinen Titelsprung. Bei vollem Funktionsumfang stehen „starten“ und „stoppen“ der
Wiedergabe, „Titelsprung vor“ und „Titelsprung zurück“ zur
Verfügung. Die Funktionen können über die Auswahl im
dementsprechenden Menü ausgeführt werden. Die Wiedergabe
wird automatisch bei Anrufen gestoppt, muss allerdings evtl.
manuell wieder gestartet werden (abhängig vom Mobiltelefon).
Hinweis: A2DP funktioniert nur in Fahrzeugen mit MFA-Display!
Die MFA+ Funktion zeigt zusätzliche
fahrzeugspezifische Daten an.
Diese Funktion zeigt die
Abstände der Werks-PDC an.
Obere 4 Werte =
Frontsensoren
Untere 4 Werte =
Rücksensoren
Im Menü Einstellungen können die
Lautstärke, die Sprache manuell und die
Maßeinheiten eingestellt und die Werkseinstellungen wiederhergestellt werden.
3.4.7. Einstellungen der blueLOGiC® Freisprecheinrichtung
Version 13.09.2010 BT-VW01
Page 9
Seite9
Diese Funktion zeigt die aktuelle Version der
blueLOGiC®- Freisprecheinrichtung an.
Funktion
Code Nr
Min
Max
Mikrofonverstärkung
+001xx
01
15
Sprachlautstärke
+0021xx
01
15
Klingeltonlautstärke
+0022xx
01
15
Interface Werkseinstellungen
+009
Parrot Update Mode
+000
3.4.8. Version der blueLOGiC® Freisprecheinrichtung
3.5. Einstellungen, Werkseinstellung, Update
Die Einstellungen der blueLOGiC® Freisprecheinrichtung werden über Anrufcodes
vorgenommen. Die Gesprächslautstärke, Klingeltonlautstärke und Mikrofon-Empfindlichkeit
können separat eingestellt werden. Ferner ist es möglich, die Freisprecheinrichtung in den
Werks-Zustand zu versetzen sowie den Update Modus für den Parrot Chipsatz zu aktivieren.
Um eine der Funktionen auszuführen, im Telefonmodus den entsprechenden Code der
Tabelle wählen wie bei einem Anruf.
Bei den Codes für Verstärkung und Lautstärke muss noch ein zweistelliger Ausprägungswert
zwischen 01 (Min) und 15 (Max) angehängt werden (z.B: „+002112“ wählen um die
Sprachlautstärke auf 12 einzustellen). Nach Anwahl mit einem Befehlscode wird mit „Anruf fehlgeschlagen“ quittiert. Systemupdates des Parrot Chipsatzes sind über Bluetooth®
Schnittstelle eines PCs möglich.
Version 13.09.2010 BT-VW01
Page 10
Seite10
4. Technische Daten
Integrierter Bluetooth® Chip Parrot CK5050new
Spannungs-Arbeitsbereich 10.5 – 14.8 V
Ruhestrom <1 mA
Arbeitsstrom 120mA
Leistungsaufnahme 1.8W
Temperaturbereich -30°C bis +80°C
Gewicht 95g
Abmessungen (nur Box) B x H x T 106 x 30 x 71 mm
5. Technischer Support
Caraudio-Systems Vertriebs GmbH NavLinkz GmbH
Hersteller Vertrieb/Techn. Support
Rheinhorststr. 22 Eurotec-Ring 45
D-67071 Ludwigshafen am Rhein D-47445 Moers
Tel +49 180 3 907050*
Email support@caraudio-systems.de
* 7,6cent/Minute aus dem dt. Festnetz, vom dt. Mobilfunk je nach Provider mehr.
Rechtlicher Hinweis: Hier genannte Firmen- und Markenzeichen sowie Produktnamen, sind eingetragene
Warenzeichen ® und somit Eigentum der jeweiligen Rechteinhaber.
Version 13.09.2010 BT-VW01
Page 11
blueLOGiC® Freisprecheinrichtung
BT-VW01
für VW RNS510 und Skoda Columbus
Navigationssyteme, VW RCD510 Radiosysteme
oder Fahrzeuge mit FIS
In das Fahrzeug-Infotainment integrierte Bluetooth®-Freisprecheinrichtung
Version 31.03.2010
Page 12
Seite2
Inhaltsverzeichnis
1. Vor der Installation
1.1. Lieferumfang
1.2. Überprüfung der Freisprecheinrichtungs-Kompatibilität mit Fahrzeug und
Zubehör
2. Installation
2.1. Installationsort
2.2. Ausbau der Navigationseinheit
2.3. Aktivierung der Freisprecheinrichtung
3. Bedienung
3.1. Paarung und Verbindung der blueLOGiC® Freisprecheinrichtung mit dem
Mobiltelefon
3.2. Einlesen des Telefonbuchs
3.3. Telefonbedienung über die Headunit
3.4. Telefon- und Zusatzfunktionen durch Multifunktionslenkrad und FIS
3.4.1. Telefonbuch
3.4.2. Direktruf
3.4.3. SMS-Funktionen (lesen und schreiben)
3.4.4. A2DP - Audio Streaming
3.4.5. MFA+ - fahrzeugspezifische Daten
3.4.6. MFA PDC – Abstandsinformationen der Parksensoren
3.4.7. Einstellungen der blueLOGiC® Freisprecheinrichtung
3.4.8. Version der blueLOGIC® Freisprecheinrichtung
3.5. Einstellungen, Werkseinstellung, Update
4. Technische Daten
5. Technischer Support
Hinweis
Veränderungen der Fahrzeugsoftware können die Funktionsfähigkeit der Freisprecheinrichtung beeinträchtigen. Softwareupdates für Freisprecheinrichtungen werden Kunden bis
zu einem Jahr nach Erwerb der Freisprecheinrichtung kostenlos gewährt. Zum Update muss
die Freisprecheinrichtung frei eingeschickt werden. Kosten für Ein- und Ausbau werden nicht
erstattet.
Version 31.03.2010
Page 13
Seite3
HW ________ SW ________
SW-Stand und HW-Stand der Freisprecheinrichtungs-Box notieren. Manual
aufbewahren für Support-Zwecke!
Produktfeatures
Integration in und Steuerung über die Telefonschnittstelle des Werks-Infotainment
Updatefähiger Parrot Chipsatz mit bester Sprachqualität und hoher Kompatibilität
Automatische Radiostummschaltung bei Anruf
Gesprächsaudio über Soundsystem des Fahrzeugs, regelbare Lautstärke
Externes Mikrofon mit Verstärkungseinstellung über das Fahrzeug-Infotainment
A2DP Audio Streaming (A2DP muss vom Mobiltelefon unterstützt werden)
Bis zu 5 Mobiltelefone können gleichzeitig gepaart sein
Nutzung der Werks-Radio/-Navigationstasten zur Telefonfunktionssteuerung
Integration des Mobiltelefonbuchs (ca. 1000 Rufnummern)
Audio-Einstellungen über das Fahrzeug-Infotainment
SMS-Funktionen (muss vom Mobiltelefon unterstützt werden)
Mehrsprachige Unterstützung durch das FIS Display und automatische
Landessprachenerkennung
MFA+ Anzeigen (Voraussetzung: FIS Display)
1. Vor der Installation
Vor der Installation sollte dieses Manual durchgelesen werden. Für die Installation sind
Fachkenntnisse notwendig. Der Installationsort der Freisprecheinrichtung muss so gewählt
werden, dass es weder Feuchtigkeit noch Hitze ausgesetzt ist.
1.1. Lieferumfang
Version 31.03.2010
Page 14
Seite4
Voraussetzungen
Fahrzeug VW, Skoda, Seat
Navigation/ Radio RCD510 Radiosystem RNS510 Navigationssystem
Columbus Navigationssystem
Trinax Navigationssytem
Andere Navigations--/ Radiosysteme mit FIS Display
Einschränkungen
Werks-Telefonmodul muss, falls vorhanden, deinstalliert werden
FIS rotes Display (weiß wird nicht unterstützt)
1.2. Überprüfung der Freisprecheinrichtungs-Kompatibilität mit Fahrzeug und Zubehör
2. Installation
Zündung ausstellen und Fahrzeugbatterie nach Werksangaben abklemmen!
Darf gemäß Werksangaben die Fahrzeugbatterie nicht abgeklemmt werden,
reicht es in den meisten Fällen aus, das Fahrzeug in den Sleep-Modus zu
versetzen. Sollte dieses nicht funktionieren, kann die Fahrzeugbatterie mit
einer Widerstandsleitung abgeklemmt werden.
Die Freisprecheinrichtung benötigt Dauerstrom. Kommt die Spannungsversorgung nicht direkt von der Fahrzeugbatterie, muss überprüft werden, ob
die Spannungsversorgung dauerhaft und startstabil ist.
2.1.Installationsort
Die Freisprecheinrichtung wird an der Rückseite der Navigationseinheit verbaut.
2.2. Ausbau der Navigationseinheit
Navigationseinheit entriegeln und ausbauen.
Version 31.03.2010
Page 15
Seite5
Quadlock-Stecker
Quadlockbuchse des Fahrzeugkabelbaums aus der Navigationseinheit ausstecken. Quadlockbuchse des Freisprecheinrichtung
Kabelsatzes in der Navigationseinheit verriegeln.
Quadlockbuchse des Fahrzeugkabelbaumes im Quadlockstecker
des Interface Kabelsatzes verriegeln.
Mikrofon in der Nähe des Fahrers platzieren. 3.5mm Klinkenstecker des Mikrofons in die
3.5mm Klinkenbuchse des blueLOGiC® Kabelsatzes einstecken.
2.3. Aktivierung der Freisprecheinrichtung
Nach der Installation der Freisprecheinrichtung muss das Fahrzeug zur Einbindung der neuen
Hardware in den Ruhezustand versetzt werden, damit die Telefonoption aktiviert wird. Dazu
nach dem Wiederanschluss der Batterie Fahrzeug abschließen und 5-10 Minuten warten.
3. Bedienung
Bei Fahrzeugen mit RCD510 oder RNS510 kann die blueLOGiC® Freisprecheinrichtung über
das Telefonmenü der Headunit gesteuert werden. Bei Fahrzeugen mit FIS ist es möglich, die
blueLOGiC® Freisprecheinrichtung über die Tasten des Multifunktionslenkrads in Verbindung
mit dem FIS-Telefonmenü zu steuern. Hat ein Fahrzeug eine Headunit und FIS, sind beide
Steuerungsvarianten möglich. Die Steuerung über FIS bietet im Vergleich zur Steuerung über
die Headunit zusätzliche Funktionen. Manche Einstellungen können durch das Wählen von
Anrufcodes, die auf jeden Fall für nachgerüstete RCD510/RNS510 ohne FIS benötigt werden,
verändert werden.
3.1. Paarung und Verbindung der blueLOGiC® Freisprecheinrichtung mit dem
Mobiltelefon
Es können bis zu 5 Mobiltelefone gleichzeitig mit der blueLOGiC® Freisprecheinrichtung
gepaart sein. Wird ein 6. Mobiltelefon gepaart, so wird der älteste Paarungseintrag gelöscht.
Evtl. muss zur korrekten Funktion das Fahrzeug, wie unter 2.3. beschrieben, in den Ruhezustand versetzt werden. Die Paarung zwischen Mobiltelefon und Freisprecheinrichtung
über die entsprechende Menüebene des Mobiltelefons aktivieren (siehe Anleitung des
Mobiltelefonherstellers). Suchen nach „blueLOGiC®“ und verbinden mit Aktivierungscode „1234“.
Ist ein Mobiltelefon mit der blueLOGiC® Freisprecheinrichtung gepaart (Voraussetzung:
Paarung, wie oben beschrieben, ist erfolgt), wird - wenn das Mobiltelefon in die Reichweite
der blueLOGiC® Freisprecheinrichtung kommt - automatisch eine Verbindung hergestellt.
Sind mehrere gepaarte Mobiltelefone in Reichweite, so ist die blueLOGiC® Freisprecheinrichtung immer mit dem zuerst in Verbindung gesetzten Mobiltelefon verbunden.
Version 31.03.2010
Page 16
Seite6
Die Freisprecheinrichtung nutzt die
Telefonschnittstelle des Werks-Navigationssystems/-Radios. Die Bedienung entspricht
von daher grundsätzlich der im Handbuch
des jeweiligen Systems beschriebenen
Bedienung.
Durch Drücken der
Menü-Taste des
Multifunktionslenkrads
wechselt das FIS die
verschiedenen Menüs
(Radio, Navigation,
Telefon,…). Ist die
blueLOGIC® Freisprecheinrichtung
installiert, zeigt das
Telefon-Menü den
blueLOGIC®-Startbildschirm
Die Signalstärke des
Mobiltelefons wird
durch die Balken obenim Startbildschirm
angezeigt. Das
blueLOGIC®-Hauptmenü wird durch
Betätigen der “Up andDown-Tasten” auf demMultifunktionslenkradangezeigt.
Die Funktionen des blueLOGIC®-Hauptmenüs im FIS sind
in den Kapiteln 3.3.1. bis 3.3.8. beschrieben.
RNS510
3.2. Einlesen des Telefonbuchs
Nach jeder Verbindungsherstellung mit einem Mobiltelefon, wird das Telefonbuch des
Mobiltelefons neu in das Fahrzeug-Infotainment eingelesen. Je nach Mobiltelefon wird der
Telefonspeicher und/oder der SIM-Kartenspeicher eingelesen. Dieser Vorgang kann einige
Minuten dauern. Sollte das Telefonbuch nicht automatisch oder komplett eingelesen
werden, ist es unter Umständen nötig, die Kontakte aus dem SIM-Kartenspeicher in den
Telefonspeicher des Mobiltelefons zu kopieren!
Bei einigen Mobiltelefonen erfolgt die Telefonbuchübertragung nicht automatisch, sondern
muss manuell über das Mobiltelefon an die blueLOGiC® Freisprecheinrichtung gesendet
werden. (die Vorgehensweise ist ebenfalls abhängig vom Mobiltelefon, z.B. „Telefonbuch an Bluetooth senden“).
Die manuelle Übertragung muss nach Änderungen der Kontakte am Mobiltelefon zur
Aktualisierung wiederholt werden.
Der Speicher der blueLOGiC® Freisprecheinrichtung kann ca. 1000 Rufnummern speichern.
3.3. Telefonbedienung über die Headunit
3.4. Telefon- und Zusatzfunktionen durch Multifunktionslenkrad und FIS
Version 31.03.2010
Page 17
Seite7
Die Telefonbucheinträge der
gespeicherten
Rufnummern können
im Telefonbuchmenü
ausgewählt werden.
Es werden für jeden
Kontakt die
gespeicherten
Nummern einzeln infestgelegter
Reihenfolge (Büro,
Mobil, Privat,…)
angezeigt. Ist ein
Eintrag ausgewählt,wird dieser einzeln
mit Anrufoption
angezeigt.
Die im Mobiltelefon gespeicherten
Direktrufnummern können im Menü
Direktruf ausgewählt werden.
Bei aktiviertem A2DP – Audio Streaming der blueLOGiC® Freisprech-
einrichtung ist es möglich, Musik-Files mit dem Mobiltelefon über
das Werks-Soundsystem des Fahrzeugs abzuspielen. Die möglichen
Steuerungsoptionen der Audiowiedergabe des Mobiltelefons über
das Werks-Navigationssystem hängen von der Software des
Mobiltelefons ab, z.B. unterstützen iPhones® keinen Titelsprung.
Bei vollem Funktionsumfang stehen „starten“ und „stoppen“ der
Wiedergabe, „Titelsprung vor“ und „Titelsprung zurück“ zur
Verfügung. Die Funktionen können über die Auswahl im
dementsprechenden Menü ausgeführt werden. Die Wiedergabe
wird automatisch bei Anrufen gestoppt, muss allerdings evtl.
manuell wieder gestartet werden (abhängig vom Mobiltelefon).
3.4.1. Telefonbuch
3.4.2. Direktruf
3.4.3. SMS - Funktionen (lesen undschreiben)
Die blueLOGIC® Freisprecheinrichtung unterstützt lesen und schreiben von SMS unter dem
Menüpunkt SMS, falls das Mobiltelefon diese Funktion unterstützt. Dort sind einige
Standardantwort-vorlagen auswählbar.
3.4.4. A2DP - Audio Streaming
Version 31.03.2010
Page 18
Seite8
Die MFA+ Funktion zeigt zusätzliche
fahrzeugspezifische Daten an.
Diese Funktion zeigt die
Abstände der Werks-PDC an.
Obere 4 Werte =
Frontsensoren
Untere 4 Werte =
Rücksensoren
Im Menü Einstellungen können die
Lautstärke, die Sprache manuell und die
Maßeinheiten eingestellt und die Werkseinstellungen wiederhergestellt werden.
Diese Funktion zeigt die aktuelle Version der
blueLOGiC®- Freisprecheinrichtung an.
3.4.7. Einstellungen der blueLOGiC® Freisprecheinrichtung
3.4.8. Version der blueLOGiC® Freisprecheinrichtung
3.5. Einstellungen, Werkseinstellung, Update
Die Einstellungen der blueLOGiC® Freisprecheinrichtung werden über Anrufcodes
vorgenommen. Die Gesprächslautstärke, Klingeltonlautstärke und Mikrofon-Empfindlichkeit
können separat eingestellt werden. Ferner ist es möglich, die Freisprecheinrichtung in den
Werks-Zustand zu versetzen sowie den Update Modus für den Parrot Chipsatz zu aktivieren.
Um eine der Funktionen auszuführen, im Telefonmodus den entsprechenden Code der
Tabelle wählen wie bei einem Anruf.
Version 31.03.2010
Page 19
Seite9
Funktion
Code Nr
Min
Max
Mikrofonverstärkung
+001xx
01
15
Sprachlautstärke
+0021xx
01
15
Klingeltonlautstärke
+0022xx
01
15
Interface Werkseinstellungen
+009
Parrot Update Mode
+000
Bei den Codes für Verstärkung und Lautstärke muss noch ein zweistelliger Ausprägungswert
zwischen 01 (Min) und 15 (Max) angehängt werden (z.B: „+002112“ wählen um die
Sprachlautstärke auf 12 einzustellen). Nach Anwahl mit einem Befehlscode wird mit „Anruf fehlgeschlagen“ quittiert. Systemupdates des Parrot Chipsatzes sind über Bluetooth®
Schnittstelle eines PCs möglich.
4. Technische Daten
Integrierter Bluetooth® Chip Parrot CK5050
Spannungs-Arbeitsbereich 10.5 – 14.8 V
Ruhestrom <1 mA
Arbeitsstrom 120mA
Leistungsaufnahme 1.8W
Temperaturbereich -30°C bis +80°C
Gewicht 95g
Abmessungen (nur Box) B x H x T 106 x 30 x 71 mm
5. Technischer Support
Caraudio-Systems Vertriebs GmbH NavLinkz GmbH
Hersteller Vertrieb/Techn. Support
Rheinhorststr. 22 Eurotec-Ring 45
D-67071 Ludwigshafen am Rhein D-47445 Moers
Tel +49 180 3 907050*
Email support@caraudio-systems.de
* 7,6cent/Minute aus dem dt. Festnetz, vom dt. Mobilfunk je nach Provider mehr.
Rechtlicher Hinweis: Hier genannte Firmen- und Markenzeichen sowie Produktnamen, sind eingetragene
Warenzeichen ® und somit Eigentum der jeweiligen Rechteinhaber.
Version 31.03.2010
Page 20
blueLOGiC® hands-free kit
BT-VW01
for VW RNS510 and Skoda Columbus navigation
systems, VW RCD510 radio systems
or vehicles with FIS display
Bluetooth®-hands-free phone kit fully integrated in the vehicle infotainment
Version 13.09.2010
Page 21
page2
Contents
1. Prior to installation
1.1. Delivery contents
1.2. Checking the compatibility of vehicle and accessories
2. Installation
2.1. Place of installation
2.2. Removal of head unit and connections
2.3. Activation of the interface
3. Interface operation
3.1. Pairing the blueLOGiC® interface with a mobile phone
3.2. Loading of phone book
3.3. Phone functions through head-unit
3.4. Phone and additional functions through steering-wheel and FIS
3.4.1. Phone book
3.4.2. Direct dial
3.4.3. SMS - reading and writing
3.4.4. A2DP - audio streaming
3.4.5. MFA+ - vehicle information
3.4.6. MFA PDC - distance information of the park distance control
3.4.7. Settings - of the blueLOGiC® interface
3.4.8. Version - of the blueLOGIC® interface
3.5. Setup, factory defaults and update function through call codes
4. Specifications
5. Technical support
Information
Changes of the vehicle software can cause malfunctions of the interface. We offer free
software-updates for interfaces for one year after purchase. To receive a free update, the
interface must be sent in at own cost. Labor cost for and other expenses involved with the
software-updates will not be refunded.
Version 13.09.2010 BT-VW01
Page 22
page3
HW ________ SW ________
Take down the SW-version and HW-version of the interface and store this manual
for support purposes.
Product features
Integration in and controls through the telephone port of the factory infotainment
Updatable Parrot chipset with best audio quality and high phone compatibility
Automatic radio mute
Caller audio through vehicle sound-system
External microphone with amplification adjustment through infotainment
A2DP audio streaming (requirement: MFA-display in vehicle; mobile phone supports
function).
up to 10 mobile phones can be paired simultaneously
Use of factory/vehicle buttons to control phone functions
Mobile phone book integration (about 1000 call numbers)
Audio adjustment and settings through vehicle infotainment
SMS reading and writing if supported by mobile phone
Multi-language support of FIS display and automatic vehicle language detection
MFA+ display features (requirement is an FIS display)
1. Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The
place of installation must be free of moisture and away from heat sources.
1.1. Delivery contents
Version 13.09.2010 BT-VW01
Page 23
page4
Requirements
Vehicle VW, Skoda, Seat
Navigation RCD510 radio system RNS510 navigation system
Columbus navigation system
Trinax Navigationssystem
Other navigation-/radio systems with FIS display
Limitations
Factory telephone kit must be removed if installed
FIS must be red colored (white is not supported yet)
A2DP Only works on vehicles with MFA-display in the
instruments
1.2. Checking the compatibility of vehicle and accessories
2. Installation
Switch off ignition and disconnect the vehicle’s battery! The interface needs a
permanent 12V source. If according to factory rules disconnecting the battery
is to be avoided, it is usually sufficient to put the vehicle is sleep-mode. In
case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
If power source is not taken directly from the battery, the connection has to be
checked for being start-up proven and permanent.
2.1.Place of installation
The interface is installed on the backside of the navigation/radio unit which must be
removed for installation of the interface.
2.2. Removal of head unit and connections
Unlock the navigation/radio unit and remove it from the
dashboard.
Version 13.09.2010 BT-VW01
Page 24
page5
Quadlock socket
Remove the vehicle harness‘ Quadlock socket from the
head unit. Plug the Quadlock socket of the interface harness
into the head unit and the Quadlock socket of the vehicle
harness into the Quadlock connector of the interface harness.
Install the microphone close to the driver. Connect the microphones 3 Pin AMP jack to the 3
Pin AMP jack bush of the blueLOGiC® harness.
2.3. Activation of the interface
After first installation the vehicle must go into sleep-mode in order to recognize the newly
attached hardware. After re-connecting the battery, lock the vehicle and wait for 5 -10
minutes.
3. Interface operation
On vehicles with RCD510 orRNS510 the head-unit’s phone menu can be used to control the
blueLOGiC® interface. On vehicles with FIS display, it is possible to control the blueLOGiC®
interface through the steering-wheel buttons and the FIS’ phone menu. If a vehicle is
equiped with head-unit and FIS, both controlling options are available. Controls by FIS is
offering more options in comparison to controls by head-unit. Some settings can be changed
by dialing setting codes which is especially needed in vehicles with retrofitted
RCD510/RNS510 without FIS display.
3.1.Pairing the blueLOGiC® interface with a mobile phone
Up to 10 mobile phones can simultaneously be paired with the blueLOGiC® interface. If a
11th phone is paired, the oldest entry is automatically deleted. In some cases, it becomes
necessary to put the vehicle in sleep mode to enable correct function of the 11th phone.
For pairing, enable the pairing mode of the mobile phone (see manual of the mobile phone).
Search with the mobile phone for „blueLOGiC“ or „CK5050N“ and connect with activation
code „1234“.Some mobile phones try to connect to the blueLOGiC ® interface with another
function as "hands free". Check this attitude and switch the adjustment to "hands free" if
necessary (see manual of the mobile phone).
If a mobile phone had been paired to the blueLOGiC® interface (reqirement is an occurred
pairing with a mobile phone, see above), a connection will be automatically established as
soon as the mobile phone is in reach. If multiple paired mobile phones are simultaneously in
reach, the blueLOGiC® interface will be connected to the first phone.
Version 13.09.2010 BT-VW01
Page 25
page6
The mobile phone’s
signal strength is
shown by the bars ontop of the startup
screen. The
blueLOGIC® main
menu is opened by
up or down key of
the steering-wheel
while the startup
screen is displayed.
RNS510
If you have connection problems between mobile phone and the blueLOGIC, first check at
the parrot website whether an update for the parrot chip is available. The part number of
the parrot chip can be found in the specifications at the end of the manual.
3.2. Loading of phone book
After each establishment of connection to the mobile phone, the phone book of the mobile
phone will be loaded to the vehicle infotainment.
Depending on the mobile phone either it will be loaded from the phone’s memory or the
SIM card. This process can take a few minutes. If the phone book is no or not completely
loaded, it might be necessary to copy the contacts from the SIM-card to the mobile phone
memory!
Some mobile phones do not automatically load the phone book to the infotainment, but the
sending must be manually initiated (the procedure varies depending on the mobile phone,
z.B. “send phone book to Bluetooth”).
The manual procedure must be repeated for refreshment if the mobile phone’s contacts
have been edited.
The memory of blueLOGiC® interface can save about 1000 call numbers.
3.3. Phone functions through head-unit
The interface enables the phone bus of the factory
navigation system. Therefore in principal, the operation
through the head-unit is analogue as described in the
manual of the navigation/radio system.
3.4. Phone and additional functions through steering-wheel and FIS
Using the menu button
of the steering-wheel,
the FIS display switches
through different
menus (radio, nav, phone,…). With
installed blueLOGIC®,
the phone menu
shows the blueLOGIC®
startup screen.
Version 13.09.2010 BT-VW01
The optionsofthe blueLOGIC® mainmenu at FIS are described
in the chapters 3.3.1. thru 3.3.8..
Page 26
page7
The phone book
entries of the
connected phone are
available in the
phone book menu.
Contacts are
displayed once for
every
phone number in a
fixedorder (office,
mobile, home,…).
Once an entry is
selected, it will be insingle display with
dialing option.
The mobile phone’s direct dial
numbers are available in the menu
items direct dial.
When the blueLOGiC® interface AD2P function is started, it is
possible to listen to music files which are played by the mobile
phone on the factory sound system. The available options to control
the play functions of the mobile phone depend very much on the
mobile phone, for example iPhones® do not support any track
skipping. Full functions are starting and stopping the playback, next
track and previous track. The functions can be executed by selecting
the corresponding menu entry. Playback is automatically stopped
during call activity but possibly needs to be manually restarted
(depend on mobile phone).
Note: A2DP only works on vehicles with MFA-display in the
instruments
The MFA+ function shows additional
detailed condition information.
3.4.1. Phone book
3.4.2. Direct dial
3.4.3. SMS - reading and writing
If supported by the mobile phone, the blueLOGIC® interface supports reading and writing
SMS under menu item SMS (if supported by mobile phone). There are some standard
template answers available.
3.4.4. A2DP - audio streaming
3.4.5. MFA+ - vehicle information
Version 13.09.2010 BT-VW01
Page 27
page8
This function shows the
distance data of the
factory PDC.
Upper 4 values =
front sensors
Lower 4 values =
rear sensors
In the settings menu it is possible to make
volume adjustments, manually adjust the
language, change unit scales and load the
interface’s factory values.0
Show blueLOGiC® interface version
information.
Function
Code no.
Min
Max
Microphone sensitivity
+001xx
01
15
Caller audio volume
+0021xx
01
15
Ringing tone volume
+0022xx
01
15
Factory defaults
+009
Parrot Update Mode
+000
3.4.6. MFA PDC - distance information of park distance control
3.4.7. Settings - of the blueLOGiC® interface
3.4.8. Version of the blueLOGiC® interface
3.5. Setup, factory defaults and update functionthroughcallcodes
Settings of the blueLOGiC® interface can also be changed by dialing setting codes in the
vehicle telephone mode. Caller audio volume, Ringing tone volume and microphone
sensitivity can be adjusted separately. The interface can be reset to factory defaults and
updates of the Parrot chipset can be initiated. To execute a function, just dial the
corresponding code from the below table like a phone number and confirm with “pick-up”.
Version 13.09.2010 BT-VW01
Page 28
page9
To the codes for volume and sensitivity it is necessary to add two digits for the desired value
(01 min. to 15 max.). For example dial “+002112” to set the caller audio volume to level 12.
After dialing a code, the navigation will confirm with “call failed”.
System updates of the Parrot chipset are possible through Bluetooth® via PC.
4. Specifications
Integrated Bluetooth® Chip Parrot CK5050new
Operation voltage 10.5 – 14.8V DC
Stand-by power drain <1mA
Operation power drain 120mA
Power consumption 1.8W
Temperature range -30°C to +80°C
Weight 95g
Dimensions (box only) B x H x T 106 x 30 x 71 mm
5. Technical Support
Caraudio-Systems Vertriebs GmbH NavLinkz GmbH
manufacturer/distribution corporate sales/tech support
Rheinhorststr. 22 Eurotec-Ring 45
D-67071 Ludwigshafen am Rhein D-47445 Moers
phone +49 180 3 907050
email support@caraudio-systems.de
Legal disclaimer: Mentioned company- and trademarks, as well as product names/codes are registered
trademarks ® of their corresponding legal owners.
Version 13.09.2010 BT-VW01
Page 29
blueLOGiC® hands-free kit
BT-VW01
for VW RNS510 and Skoda Columbus navigation
systems, VW RCD510 radio systems
or vehicles with FIS display
Bluetooth®-hands-free phone kit fully integrated in the vehicle infotainment
Version 07.04.2010
Page 30
Seite2
Contents
1. Prior to installation
1.1. Delivery contents
1.2. Checking the compatibility of vehicle and accessories
2. Installation
2.1. Place of installation
2.2. Removal of head unit and connections
2.3. Activation of the interface
3. Interface operation
3.1. Pairing the blueLOGiC® interface with a mobile phone
3.2. Loading of phone book
3.3. Phone functions through head-unit
3.4. Phone and additional functions through steering-wheel and FIS
3.4.1. Phone book
3.4.2. Direct dial
3.4.3. SMS - reading and writing
3.4.4. A2DP - audio streaming
3.4.5. MFA+ - vehicle information
3.4.6. MFA PDC - distance information of the park distance control
3.4.7. Settings - of the blueLOGiC® interface
3.4.8. Version - of the blueLOGIC® interface
3.5. Setup, factory defaults and update function through call codes
4. Specifications
5. Technical support
Information
Changes of the vehicle software can cause malfunctions of the interface. We offer free
software-updates for interfaces for one year after purchase. To receive a free update, the
interface must be sent in at own cost. Labor cost for and other expenses involved with the
software-updates will not be refunded.
Version 07.04.2010
Page 31
Seite3
HW ________ SW ________
Take down the SW-version and HW-version of the interface and store this manual
for support purposes.
Product features
Integration in and controls through the telephone port of the factory infotainment
Updatable Parrot chipset with best audio quality and high phone compatibility
Automatic radio mute
Caller audio through vehicle sound-system
External microphone with amplification adjustment through infotainment
A2DP audio streaming (requirement: mobile phone supports function).
up to 5 mobile phones can be paired simultaneously
Use of factory/vehicle buttons to control phone functions
Mobile phone book integration (about 1000 call numbers)
Audio adjustment and settings through vehicle infotainment
SMS reading and writing if supported by mobile phone
Multi-language support of FIS display and automatic vehicle language detection
MFA+ display features (requirement is an FIS display)
1. Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The
place of installation must be free of moisture and away from heat sources.
1.1. Delivery contents
Version 07.04.2010
Page 32
Seite4
Requirements
Vehicle VW, Skoda, Seat
Navigation RCD510 radio system RNS510 navigation system
Columbus navigation system
Trinax Navigationssystem
Other navigation-/radio systems with FIS display
Limitations
Factory telephone kit must be removed if installed
FIS must be red colored (white is not supported yet)
1.2. Checking the compatibility of vehicle and accessories
2. Installation
Switch off ignition and disconnect the vehicle’s battery! The interface needs a
permanent 12V source. If according to factory rules disconnecting the battery
is to be avoided, it is usually sufficient to put the vehicle is sleep-mode. In
case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
If power source is not taken directly from the battery, the connection has to be
checked for being start-up proven and permanent.
2.1.Place of installation
The interface is installed on the backside of the navigation/radio unit which must be
removed for installation of the interface.
2.2. Removal of head unit and connections
Unlock the navigation/radio unit and remove it from the
dashboard.
Version 07.04.2010
Page 33
Seite5
Quadlock socket
Remove the vehicle harness‘ Quadlock socket from the
head unit. Plug the Quadlock socket of the interface harness
into the head unit and the Quadlock socket of the vehicle
harness into the Quadlock connector of the interface harness.
Install the microphone close to the driver. Connect the microphones 3.5 mm jack to the
3.5mm jack bush of the blueLOGiC® harness.
2.3. Activation of the interface
After first installation the vehicle must go into sleep-mode in order to recognize the newly
attached hardware. After re-connecting the battery, lock the vehicle and wait for 5 -10
minutes.
3. Interface operation
On vehicles with RCD510 orRNS510 the head-unit’s phone menu can be used to control the
blueLOGiC® interface. On vehicles with FIS display, it is possible to control the blueLOGiC®
interface through the steering-wheel buttons and the FIS’ phone menu. If a vehicle is
equiped with head-unit and FIS, both controlling options are available. Controls by FIS is
offering more options in comparison to controls by head-unit. Some settings can be changed
by dialing setting codes which is especially needed in vehicles with retrofitted
RCD510/RNS510 without FIS display.
3.1.Pairing the blueLOGiC® interface with a mobile phone
Up to 5 mobile phones can simultaneously be paired with the blueLOGiC® interface. If a sixth
phone is paired, the oldest entry is automatically deleted. In some cases, it becomes
necessary to put the vehicle in sleep mode to enable correct function of the 6th phone.
For pairing, enable the pairing mode of the mobile phone (see manual of the mobile phone).
Search with the mobile phone for „blueLOGiC“ and connect with activation code „1234“.
If a mobile phone had been paired to the blueLOGiC® interface (reqirement is an occurred
pairing with a mobile phone, see above), a connection will be automatically established as
soon as the mobile phone is in reach. If multiple paired mobile phones are simultaneously in
reach, the blueLOGiC® interface will be connected to the first phone.
Version 07.04.2010
Page 34
Seite6
The mobile phone’s
signal strength is
shown by the bars ontop of the startup
screen. The
blueLOGIC® main
menu is opened by
up or down key of
the steering-wheel
while the startup
screen is displayed.
RNS510
3.2. Loading of phone book
After each establishment of connection to the mobile phone, the phone book of the mobile
phone will be loaded to the vehicle infotainment.
Depending on the mobile phone either it will be loaded from the phone’s memory or the
SIM card. This process can take a few minutes. If the phone book is no or not completely
loaded, it might be necessary to copy the contacts from the SIM-card to the mobile phone
memory!
Some mobile phones do not automatically load the phone book to the infotainment, but the
sending must be manually initiated (the procedure varies depending on the mobile phone,
z.B. “send phone book to Bluetooth”).
The manual procedure must be repeated for refreshment if the mobile phone’s contacts
have been edited.
The memory of blueLOGiC® interface can save about 1000 call numbers.
3.3. Phone functions through head-unit
The interface enables the phone bus of the factory
navigation system. Therefore in principal, the operation
through the head-unit is analogue as described in the
manual of the navigation/radio system.
3.4. Phone and additional functions through steering-wheel and FIS
Using the menu button
of the steering-wheel,
the FIS display switches
through different
menus (radio, nav, phone,…). With
installed blueLOGIC®,
the phone menu
shows the blueLOGIC®
startup screen.
Version 07.04.2010
The optionsofthe blueLOGIC® mainmenu at FIS are described
in the chapters 3.3.1. thru 3.3.8..
Page 35
Seite7
The phone book
entries of the
connected phone are
available in the
phone book menu.
Contacts are
displayed once for
every
phone number in a
fixedorder (office,
mobile, home,…).
Once an entry is
selected, it will be insingle display with
dialing option.
The mobile phone’s direct dial
numbers are available in the menu
items direct dial.
When the blueLOGiC® interface AD2P function is started, it is
possible to listen to music files which are played by the mobile
phone on the factory sound system. The available options to control
the play functions of the mobile phone depend very much on the
mobile phone, for example iPhones® do not support any track
skipping. Full functions are starting and stopping the playback, next
track and previous track. The functions can be executed by selecting
the corresponding menu entry. Playback is automatically stopped
during call activity but possibly needs to be manually restarted
(depend on mobile phone).
The MFA+ function shows additional
detailed condition information.
3.4.1. Phone book
3.4.2. Direct dial
3.4.3. SMS - reading and writing
If supported by the mobile phone, the blueLOGIC® interface supports reading and writing
SMS under menu item SMS (if supported by mobile phone). There are some standard
template answers available.
3.4.4. A2DP - audio streaming
3.4.5. MFA+ - vehicle information
Version 07.04.2010
Page 36
Seite8
This function shows the
distance data of the
factory PDC.
Upper 4 values =
front sensors
Lower 4 values =
rear sensors
In the settings menu it is possible to make
volume adjustments, manually adjust the
language, change unit scales and load the
interface’s factory values.0
Show blueLOGiC® interface version
information.
Function
Code no.
Min
Max
Microphone sensitivity
+001xx
01
15
Caller audio volume
+0021xx
01
15
Ringing tone volume
+0022xx
01
15
Factory defaults
+009
Parrot Update Mode
+000
3.4.6. MFA PDC - distance information of park distance control
3.4.7. Settings - of the blueLOGiC® interface
3.4.8. Version of the blueLOGiC® interface
3.5. Setup, factory defaults and update functionthroughcallcodes
Settings of the blueLOGiC® interface can also be changed by dialing setting codes in the
vehicle telephone mode. Caller audio volume, Ringing tone volume and microphone
sensitivity can be adjusted separately. The interface can be reset to factory defaults and
updates of the Parrot chipset can be initiated. To execute a function, just dial the
corresponding code from the below table like a phone number and confirm with “pick-up”.
To the codes for volume and sensitivity it is necessary to add two digits for the desired value
(01 min. to 15 max.). For example dial “+002112” to set the caller audio volume to level 12.
After dialing a code, the navigation will confirm with “call failed”.
System updates of the Parrot chipset are possible through Bluetooth® via PC.
Version 07.04.2010
Page 37
Seite9
4. Specifications
Integrated Bluetooth® Chip Parrot CK5050
Operation voltage 10.5 – 14.8V DC
Stand-by power drain <1mA
Operation power drain 120mA
Power consumption 1.8W
Temperature range -30°C to +80°C
Weight 95g
Dimensions (box only) B x H x T 106 x 30 x 71 mm
5. Technical Support
Caraudio-Systems Vertriebs GmbH NavLinkz GmbH
manufacturer/distribution corporate sales/tech support
Rheinhorststr. 22 Eurotec-Ring 45
D-67071 Ludwigshafen am Rhein D-47445 Moers
phone +49 180 3 907050
email support@caraudio-systems.de
Legal disclaimer: Mentioned company- and trademarks, as well as product names/codes are registered
trademarks ® of their corresponding legal owners.
Version 07.04.2010
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.