Caratec KXG60PNV2T04 User Manual

XG6-P Series

Client SSD

Leveraging KIOXIA’s 96-layer BiCS FLASH™ 3D TLC (3-bit-per-cell), XG6-P SSDs provide high
storage capacity, while maintaining the promise of ultra-thin, high-speed storage with excep­tional power eciency.

It is best suited for video/CG contents production requiring hi-speed access to high-cap data,
AI/machine learning applications, workstations, and high-end PCs.

XG6-P Series achieve 2,920 MB/s of sequential write performance
ment vs our previous generation premium model XG5-P Series.

The 2,048 GB XG6-P SSD is available in a single-sided M.2 2280 (22 x 80mm) form factor and
oers security options including TCG Pyrite Version 1.0 support for Non-SED (Self-Encrypting
Drive) congurations and TCG Opal Version 2.01 support for SED.

[1]

, which is 32.7 % improve-

Key Features

• KIOXIA 96-Layer BiCS FLASH

• PCIe® Gen3 x4, NVMe

• Capacities up to 2,048 GB

• M.2 2280 Single-sided

• TCG OPAL 2.01 Optional for SED

TM

TM

Product image may dier from the actual product.

Key Applications

• Workstation PCs

• High-End PCs

• Video/CG contents production

• AI/Machine learning

Specications

Model Number KXG60PNV2T04 -

SED Model Number - KXG6APNV2T04

Physical

[1]

Capacity

Form Factor M.2 2280-S2 Single-sided

Interface PCIe® Gen3 x4

Interface Speed 32 GT/s

Command NVMe

Memory Type BiCS FLASH™ TLC

Connector Type M.2 M

2,048 GB

TM

1.3a

Copyright © 2019 KIOXIA Corporation. All rights reserved.

XG6-P | Client SSD | Product Brief

Rev.1.0

Specications (Continued)

Model Number KXG60PNV2T04 KXG6APNV2T04

[1]

Capacity

Form Factor M.2 2280-S2 Single-sided

Performance

[2]

(Up to)

Sequential Read 3,180 MB/s

Sequential Write 2,920 MB/s

Power Requirements

Supply Voltage 3.3 V ± 5 %

2,048 GB

Power

Active 4.9 W typ.

Consump­tion

Reliability

L1.2 mode 3 mW typ.

[3]

MTTF 1,500,000 hours

Mechanical

Dimension (LxWxH) 22.0mm x 80.0 mm x 2.23 mm

Weight (Typ.) 7.3 g typ.

Environmental

Operating : 0 to 95 °C (Controller Temperature)

Temperature

Shock (Operating) 14.7 km/s2 {1.500 G} (0.5ms)

• Device Self-test is supported.

• Host Controlled Thermal Management (HCTM) is supported.

Additional Features

• Strong & highly-ecient ECC named QSBC

• TCG Pyrite Version 1.00 is supported.

• Storage Interface Interactions Specication(SIIS) Version 1.06 is supported.

[1] Denition of capacity: KIOXIA Corporation denes a megabyte (MB) as 1,000,000 bytes, a gigabyte (GB) as 1,000,000,000 bytes and a terabyte (TB) as 1,000,000,000,000 bytes. A computer
operating system, however, reports storage capacity using powers of 2 for the denition of 1GB = 2^30 = 1,073,741,824 bytes and therefore shows less storage capacity. Available storage capacity
(including examples of various media les) will vary based on le size, formatting, settings, software and operating system, such as Microsoft Operating System and/or pre-installed software appli­cations, or media content. Actual formatted capacity may vary.

[2] Read and write speed, tested on the state of "SLC cache=ON", may vary depending on the host device, read and
write conditions, and le size.

[3] MTTF (Mean Time to Failure) is not a guarantee or estimate of product life; it is a statistical value related to mean. failure rates for a large number of products which may not accurately reect
actual operation. Actual operating life of the product may be dierent from the MTTF.

Products and specications discussed herein are subject to change without notice. All information discussed herein is provided on an “as is” basis, without warranties of any kind. Before creating
and producing designs and using, customers must refer to and comply with the latest versions of the product specications.

*PCIe® is a registered trademark of PCI-SIG.
*NVMe™ is a trademark of NVM Express, Inc.
*Read and write speed may vary depending on the host device, read and write conditions, and le size.
*All other company names, product names, and service names mentioned herein may be trademarks of their respective companies.
*Availability of the SED model line-up may vary by region.

0 to 85 °C (Other Components Temperature)

Non-Operating: -40 °C to 85 °C

TM

is supported.

Copyright © 2019 KIOXIA Corporation. All rights reserved.

XG6-P | Client SSD | Product Brief

Rev.1.0