CaptiveAire A-100 User Manual

Attributes: Double Potting Process to avoid Moisture Issues
European enclosure for outside air
Class A Standard exceeds most specifications
Four-way Airflow design for wall mount
Can be used with a transmitter to provide a 4 to 20mA signal
Continuous Element Averaging Sensors
Applications:
DDC Systems
Refrigeration Systems
OEM / Industrial
Light Industrial
DISPLAYS
RELATIVE HUMIDITY
PRESSURE
CURRENT
AIR QUALITY
ACCESSORIES
Product Data
ACI
Product Data
A/100 Series
RTD
RTD
ACI
“First in Sensor Quality”
Product Description
Product Description
The A/100 and A/1K Series temperature sensors incorporate a Class A, Thin Film Platinum RTD sensor which conforms to DIN-IEC-751 platinum RTD standards. These sensors are available in either two or three-wire configurations, incorporating high accuracy and interchangeability throughout a wide operating temperature range.
These units are offered in Room, Room with Set Point, Room with Override, Room with Setpoint and Override, and Room with Setpoint, Override, and RJ11 Jack, Stainless Steel Duct and Duct without Box, Immersion, Stainless Plate, Raw, Bendable Copper / Continuous Element and Stainless Steel Rigid Averaging, Strap-On, Bullet Probe and Outdoor Air Configurations.
All ACI Room sensors may be ordered with an optional setpoint (see chart on the following page), override, or RJ12 communication jack with terminal blocks, for remote programming. These units are also available with a 1/8" RS232 Stereo Jack.
All ACI Temperature Sensors have a limited five year warranty.
Product Specifications
Product Specifications
Output
Accuracy
Stability
Repeatability
Operating Temp Range: Single Point Continous Element Averaging
Temp. Coefficient Standardization Resistance
Characteristics For sensors with Display option, see the LCD Series cut sheet
Wiring Diagrams available at www.workaci.com/instructions.htm
C0000100 Rev 1.pdf
A/1K Series
Platinum RTD Temperature
Sensors
TEMPERATURE
Attributes: Double Potting Process to avoid Moisture Issues
European enclosure for outside air
Class A Standard exceeds most specifications
Four-way Airflow design for wall mount
Can be used with a
with a 4 pin RJ11 or 6 pin
o
100 Ohms @ 32 1K Ohms @ 32
+/- 0.06% @ 32 +/- 1.0 Ohm @ 70
less than +/- 0.1oC drift
o
C (+/-0.36oF)
+/-0.2
-58 to 392oF (-50 to 200oC)
-50 to 275oF (-45.5 to 134.8oC)
0.00385 Ohm/Ohm/ DIN-IEC-751(formerly DIN 43760)
+/- 0.06% Class A (Standard) +/- 0.12% Class B (Averaging)
F (0oC)
o
F (0oC)
o
F (0oC) Single Point
o
F (Averaging)
o
C
transmitter to provide a 4 to 20mA signal
Continuous Element Averaging Sensors
Applications:
DDC Systems
Refrigeration Systems
OEM / Industrial
Light Industrial
Made in the
USA
Automation Components, Inc.
2305 Pleasant View Rd.
Middleton, WI 53562
PH: (608) 831-2585
FAX: (608) 831-7407
TE-3
RELATIVE HUMIDITY
PRESSURE
CURRENT AIR QUALITY
ACCESSORIES
Duct /Averaging / Rigid Averaging
TEMPERATURE
4.060" [103.12mm]
Ø0.743" [18.87 mm] 2x
3/8" NPT (PG11)
CONDUIT KNOCKOUTS
4.20”
(106.68mm)
2.200" [55.88mm]
2.000" [50.8mm]
2.12”
(53.85mm)
3
Ø0.896" [22.76mm] 4x 1/2" NPT (PG16) CONDUIT KNOCKOUTS
PROBE LENGTH (U-DIMENSION)
PROBE Ø 0.250" [6.35mm]
1/2” NPT CONDUIT KNOCKOUTS (8X)
Duct Insertion (U-Dimension)
5.5" (89 mm)
7.5" (191 mm)
11.5" (292 mm)
17.5" (445 mm)
Averaging
8' (2.4 m) 12' (3.7 m) 24' (7.3 m)
Rigid Averaging
17.625” (448mm)
23.625” (600 mm)
35.625” (905mm)
Well Insertion (U-Length)
2.50" (64 mm)
4.00" (102 mm)
6.25" (158.75 mm)
1.62”
(41.15mm)
Ordering Information
Sensor # Wires Configuration Communication Jack
1
Pot Value
A/ [ ] -[ ] -[ ] -[ ] -[ ]
1
Setpoint Indicator1Pot Action
-[ ]
-[ ]
100 2W (2-Wire) R - Room RJ4 (4 Pin RJ11) 400 Cool | Warm DA (Direct)
1K 3W (3-Wire)
RS - Room w/ Setpoint RO - Room w/ Override
RJ6 (6 Pin RJ12) 1K 55 to 85 RA (Reverse) RS232 (Stereo Jack)
RSO - Room w/ Setpoint & Override
D - Duct 4”, 8”, 12”, 18”, 24”
DO - Duct without box 4”, 8”, 12”, 18” I - Immersion
3
2.5”, 4”, 6”
A - Bendable Copper Averaging 12', 24' RA - Rigid Averaging 18", 24", 36" S - Strap On
3
O - Outdoor Air SP - Stainless Plate BP - Bullet Probe W - Raw W-6’ - Raw Sensor w/6’Leads BBS - B
rass Button Sensor
SBS - Stainless Button Sensor
2K 10 to 30
3K 5K
8.5K 10K 20K 100K
1
These Options are only available on ACI’s Room Configurations. Resistors are available in series with pot values listed above. Contact ACI for details.
2
Duct, Bendable Copper and Rigid Averaging come standard w/ plastic boxes. Optional enclosures include NEMA 3R (BB), NEMA 4X (4X) or the Galvanized Junction Box (GD).
3
Immersion and Strap-On sensors come standard with the galvanized junction box. (The plastic enclosure is also available but is rated for applications below 140 degrees F) Additional enclosures include NEMA 3R (BB) or NEMA 4X (4X) for immersion and NEMA 4X (4X) for Strap On.
o
C
U-LENGTH
1
Display
-[ ]
( ) No Display (Standard)
(DF) LCD Display (Degrees F) (DC) LCD Display (Degrees C)
1
Housing Type
2
-[ ]
(PB) Plastic Housing (Standard)
(GD) Galvanized (BB) NEMA 3R (4X) NEMA 4X (EH) Euro
TE-4
2305 Pleasant View Rd. Middleton Industrial Park Middleton, WI 53562
PH: (608) 831-2585 FAX: (608) 831-7407
Loading...