CaptiveAire 7802 User Manual

Manual Controllers

A-14

Switches

Switches

Manual Controllers

20 & 30A 1ø, 20 & 30A 3ø

7812-EX
7813-EX

HP30-EX

2.250"

5.250"

5.875"

4.625"

4.250"

3.375"

3.000"

Catalog

Rating

Number Description A. VAC HP VAC

Double Pole, Single Phase

PS20AC2-HP Double Pole, Single Phase AC 20 120/277 1 120

Manual Motor Starting Switch 2 240
(No overload protection)

PS30AC2-HP Double Pole, Single Phase AC 30 120/277 2 120

Manual Motor Starting Switch 2 240
(No overload protection)

HP30-EX 30AC2-HP in a NEMA 7 & 9 Same as

Enclosure for Hazardous Locations 30AC2-HP
Class I - Groups C, D;
Class II - Groups E, F, G

1.320"

3.281"

2.375"

1.053"

2.196"

PS20AC2-HP
PS30AC2-HP

7806-P NEMA Black Nylon Enclosure with 1/2" and 3/4" knockouts at each end.
7801-P Handle Locking Guard has opening for padlock to secure control in either ON or OFF position.
7830 NEMA 3R Aluminum Enclosure.

Catalog

Rating

Number Description A. VAC HP VAC

Double Pole, Single Phase

7802 Double Pole, Single Phase AC General Use 2 120

Manual Motor Controller 30 600 max. 3 240
(No overload protection) 7.5 480

10 600

7812-P 7802 in a NEMA 1 Enclosure Same as 7802
7812-EX 7802 in a NEMA 7 & 9 Same as 7802

Enclosure for Hazardous Locations
Class I - Groups C, D;
Class II - Groups E, F, G

7832 7802 in a NEMA 3R Enclosure Same as 7802

Three Pole, Three Phase

7803 Three Phase, Three Pole AC General Use 3 120

Manual Motor Controller 30 600 max. 7.5 240
(No overload protection) 10 480

20 600

7813-P 7803 in a NEMA 1 Enclosure Same as 7803
7813-EX 7803 in a NEMA 7 & 9 Same as 7803

Enclosure for Hazardous Locations
Class I - Groups C, D;
Class II - Groups E, F, G

7833 7803 in a NEMA 3R Enclosure Same as 7803

7812-P
7813-P

7832
7833

3.910"

5.75"

1.80"

2.825"

4.50"

3.25"

2.80"

UL Listed
CSA Certified

All devices listed on this page
conform to NEMA WD-1.

Features — 20AC2-HP & 30AC2-HP

•

Oversize silver contacts for long life & better
heat dissipation.

• Single phase switches are side wired with

#14 – #10 AWG copper or copper-clad conductors.

•

Shallow design for ease of installation.

•

2-3/4" hubs (HP30-EX).

NEW

NEW

Features — 7802 &7803

•

High horsepower rating of 20HP.

•

Compact design.

• Gull-wing shaped brass terminal pressure clamps.

•

Constructed of glass-reinforced thermoplastic.

•

Two-point contact arms.

• One-piece contact carrier.

•

UL 508 & cULus Listing of individual device &
assembled device within enclosure.

• Heavy-duty zinc-plated steel strap.

• Two brass rivets secure strap to housing.

•

Back & side wire terminal screws unstaked
for use with ring terminals.

• Oversized silver alloy contacts.

•

2-3/4" hubs (7812-EX & 7813-EX).

•

2-1/2" knockouts on back and 2-1/2"–3/4"
knockouts on top and bottom (7812-P,
7813-P, 7806P).

• 2-1/2" knockouts on bottom and back

(7832 & 7833).

NEW