CaptiveAire 5EJ0804B User Manual
Copyright 2003 Luvata Grenada LLC Confidential and Proprietary. This design is for the exclusive and confidential use of Luvata Grenada LLC and its client. Any duplication made for the purpose of
disclosing this design or any part of the design to a competitor of Luvata Grenada LLC is in direct violation of this confidentiality. Any duplication must be appr oved in writing by Luvata Grenada LLC.
LUVATA HEATCRAFT EVAPORATOR SELECTION
6.02.28.999
Customer: Date: 9/29/2009
Contact: From:
Telephone: Company:
Cell: Return Tel:
Fax: Return Fax:
Job:
Quote #: 0
G I V E N D A T A
Construction
Air Side
Item: DXM1-3 Air Flow (Sft^3/min)
3,000
Coils Per Bank: 1 Altitude ft:
.00
Tube OD IN: 5/8 Ent. Air DB/WB °F:
95.00 / 78.00
Style: EJ Lvg. Air DB/WB °F:
.00 / .00
Fins Per Inch: 8 Total / Sensible MBH:
120.0 / .00
Rows: 4 Max Air PD "H2O:
.00
Fin Surface: Optimize ABC
Fin Height (IN): 31.50
Refrigerant Side
Finned Length (IN): 27.00 Refrigerant:
410A
Tubing Mat. (IN): 0.020 Copper Super Heat °F:
8.00
Fin Mat. (IN): 0.0075 Aluminum Saturated Suction Temp °F:
45.00
Circuiting: Optimize Liquid Temp °F:
110.0
Face Area (SQ FT): 5.91
O U T P U T D A T A Most Economical Specified Coil
Coil 1 Coil 2 Coil 3 Coil 4 Coil 5 Coil 6
Model Number:
5EJ0804B
Air Velocity:
(Sft/min) 507.9
Total Capacity:
MBH 146.1
Sens. Capacity:
MBH 85.19
Lvg. Air DB:
°F 68.71
Lvg. Air WB:
°F 65.87
Standard APD
"H2O .40
Code 18 / 19:
7010/5
Suction Conn.:
IN (2) 1.625
Liquid Conn 1:
IN (2) 0.625
Liquid Conn 2:
IN N/A
Refg. PD:
lbf/in^2 .66
Refg. Velocity:
ft/min 764.6
Weight:
lbm 97.00
Notes:
BCJKMPQ
Notes:
B) Rated In Compliance With ARI 410. M) Coil rating valid for Heatcraft coils only.
C) Coil Not Within Certified ARI Directory. P) Refrigerant velocity is less than 1,000.0 ft/min
J) Coil Will Be Supplied With Multiple Distributors. Q) If evaporator is used in a heatpump application, change tubing
material to 5/8 Stainless Steel or 5/8 Carbon Steel or select a 3/8 OD
coil.
K) Special Circuiting, Dead Tubes May Be Required, Consult Factory.
Page 3
LUVATA HEATCRAFT CERTIFIED DRAWING
6.02.28.999
Copyright 2003 Luvata Grenada LLC Confidential and Proprietary. This design is for the exclusive and confidential use of Luvata Grenada LLC and its client. Any duplication made for the purpose of
disclosing this design or any part of the design to a competitor of Luvata Grenada LLC is in direct violation of this confidentiality. Any duplication must be appr oved in writing by Luvata Grenada LLC.
LUVATA HEATCRAFT CERTIFIED DRAWING
6.02.28.999
Customer: Date: 9/29/2009
Contact: From:
Telephone: Company:
Cell: Return Tel:
Fax: Return Fax:
Job:
Quote #: 0
MODEL NUMBER
ITEM QTY TYPE FPI ROWS FIN FH (IN) FL (IN) HAND
DXM1-3 1 5EJ 08 04 B 31.50 27.00 Left
MATERIALS OF CONSTRUCTION OPTIONS
Fins
0.0075 Aluminum
Coating
None
Nitrogen Charge
No
Tubes
0.020 Copper
Casing Type
Flanged
Moisture Elimnator
No
Casing
Galvanized Steel
Bypass Kit Size
None
Mounting Holes
No
Conn. Material
Copper
Distributor Location Label Kit
No
Conn. Type
Sweat
Distributor Tube
0.25
Conn. Size
1.625/0.875
Nozzle Number
4
Number of Circuits
10
DIMENSIONAL DATA(IN)
H I J L M N R S T W SJC
34.50 35.50 6.00 30.00 5.25 3.25 1.50 1.50 1.50 7.50
NOTES:
GENERAL NOTES:
1. All dimensions are in inches.
2. Phenolic coated coils require a longer lead-time since they must
be re-tested after coating.
3. .375 inch mounting holes will be provided on 6 inch centers from
the centerline of the fin height and finned length. Not available
when S < 0.75 inches.
4. The suction line should be connected to the lower connection on
the entering air side for counterflow operation.
Page 22
Loading...