FEATURES
■ Class F Coil Insulation System for 155°C Total Temperature
■ Coil Molded in DuPont Rynite®for Environmental Protection
■ Unique Armature Stop Maintains Adjustment
■ Fine Wire Gauge Coils are Skeined for Coil Integrity
CONTACT DATA
CONFIGURATION:
Thru 3PDT
MATERIALS:
5 AMP:
1/8" Diameter Moveable Fine Silver
3/16" Diameter Stationary Fine Silver
10 AMP:
3/16" Diameter Moveable Silver Cadmium Oxide
3/16" Diameter Stationary Fine Silver
Gold Flash Standard on All 5 & 10 Amp Contacts
Gold Diffused Available on Special Order – Min. Qty. Req’d.
15 AMP:
7/32" Diameter Moveable Silver Cadmium Oxide
7/32" Diameter Stationary Silver Cadmium Oxide
CONTACT RATINGS
POLE UL
MODEL
CONFIGURATION RATINGS
5 amp or 1/8 HP at 120VAC
260/265 thru 3PDT
5 amp or 1/4 HP at 277VAC
2 amp at 600VAC
5 amp at 28VDC
10 amp or 1/3 HP at 120VAC
10 amp or 1/2 HP at 277VAC*
10 amp at 28VDC
261/266 thru 3PDT
1 HP at 277VAC – 3 phase
3 amp or 1/2 HP at 600VAC
12 FLA, 35 LRA at 15VAC
15 amp or 1/2 HP at 120VAC
262/267 thru 3PDT 15 amp or 1 HP at 277VAC*
15 amp at 28 VDC
* 3 Pole Devices Rated at 6-2/3 Amp When Switching Greater Than
150VAC, Unless Polarity is the Same on All Poles.
UL RECOGNIZED FILE NO.: E37066
CSA CERTIFIED FILE NO.: LR20690
EXPECTED LIFE
Electrical At Rated Load (Minimum)
100,000 Operations Except as Noted
Mechanical Life
10,000,000 Operations
DIELECTRIC STRENGTH
800 VRMS, 60 Hz Between Contacts
2200 VRMS, 60 Hz Between All Other Elements
MODELS
260: 5 Amp Open Frame
261: 10 Amp Open Frame
262: 15 Amp Open Frame
265F: 5 Amp with Flange Cover
266F: 10 amp with Flange Cover
267F: 15 Amp with Flange Cover
Other Suffixes Available
A-Indicator Lamp, B-Push to Test Button
TM-Top Mount Cover, SL - Stud & Locating Tab
COIL DATA
POLE AMP NOMINAL
RESISTANCE NOMINAL
MODEL
CONFIG. RATING VOLTAGE
IN OHMS COIL
± 10% POWER
6VAC 5.0
260/261
12VAC 20
265F/ SPDT 5, 10
24VAC 80
2.0VA
266F
48VAC 315
120VAC 2025
240VAC 8000
260/261
DPDT
6VAC 4.5
265F/
3PDT
5, 10 12VAC 18
266F
24VAC 72
2.2VA
262/
SPDT 48VAC 285
267F
DPDT 15 120VAC 1850
3PDT 240VAC 7200
6VDC 30
260/261 SPDT 12VDC 120
265F/ DPDT 5, 10 24VDC 480 1.2W
266F 3PDT 48VDC 1850
110VDC 10,000
6VDC 24
SPDT 12VDC 96
262/
DPDT 15 24VDC 375 1.5W
267F
3PDT 48VDC 1,500
110VDC 8,000
Coil Voltages: AC: Up to 277 Volts/60 Hz
DC: Up to 125 Volts
Coil Treatment: Molded Rynite®Std. Class F
Insulation Resistance: 100 Megohms Minimum
UL Insulation System File No.: E74443
S155D 155°C Total Temperature Std.
(Covers S105 Class A and S130D Class B Requirements)
OPERATE DATA
Pick Up (at 25°C): AC: Volts 85% or Less of Nominal
DC: Volts 75% or Less of Nominal
Operate Time: Approx. 15 Milliseconds
Release Time: Approx. 15 Milliseconds
ENVIRONMENTAL DATA
Operating Ambient: AC: -45° to 55°C (Except 262 & 267)
262 & 267: -45° to 65°C
DC:-45° to 70°C (Except 262 & 267)
262 & 267: -45° to 80°C
Coil Temperature Rise: (25°C Ambient – Continuous Duty)
AC:45°C Approx. @ 60 Hz – Use at 50 Hz will
Cause Slight Increase in Coil Rise
DC:25°C Approx. (Except 262 & 267)
262 & 267: 35°C Approx.
MECHANICAL DATA
Terminals: .250" x .032" Quick Connect/Solder
Cover: Clear Polycarbonate – Flammability Rating 94V2
Weight: Approx. 3 oz. (85 g)
267F
262