LabF101 Instruction Manual rel. 1.0 (09/2015)
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
- Symbols -
Made in Italy
WARNINGWARNING
This radio control model is not toy.
First time builders should seek the advice of experienced modellers before beginning assembly and/or if they do not fully
understand any part of the construction.We highly advise to read the instruction manual before assembly, and to always
keep it at hand for reference. Take care before operating this model; you are responsible for its assembly and safe
operation. The extreme performance of this model could be understimated by inexpert drivers and could damage objects
and/or people. Assembly this kit only in places out of children's reach!
CAPRICORN RC is not responsible for any damage or harm caused by improper use or assembly.
CAPRICORN RC and its distribution network are not responsible for any damage caused by shipping or handling.
Eventual parts missing from the kit or flawed must be reported within two weeks of purchase to your local hobby
shop or distributor. For best performance, we highly advise to only use original authentic CAPRICORN RC parts.
For customer support and service please contact your local hobby shop or agent from whom you purchased this item.
Contents of box may slightly differ from the pictures shown. Construction tools, body, tires,radio system and servo,
ESC, motor and battery pack are NOT INCLUDED unless otherwise stated.
L/R
Symmetrical
Mounting
2x
Assemble as many
times as specified
1 2
3 4
Assemble in the
specified order
Note:
TEXT....
Be Careful
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
- Tools & Equipment -
Made in Italy
Tools needed for assembly (NOT INCLUDED)
Parts for model completion and Start (NOT INCLUDED)
Also required: Tires - F1 Polycarbonat body - Front & Rear Wing
Hex Wrench
1,5/2/2,5/3mm
Box Wrench
7mm
Reamer
Cutter
Pliers
Fiber Glass
Tape
Transmitter
Receiver
Steering
Low Profile Servos
Li-PoBattery Pack
Battery Charger
17.5-21.5T Motor
ESC
Double side
Tape
Step 1.0
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
- Front Assembly BAG 1
Made in Italy
01
10,5
6
7
5
3
2
18
14
17
22
21
12
19
20
13
16
15
8
4
4
11
10
1
9
3x6x2
M3 nut
M3x3
M3x12
M3x6
M3x6
M3x6
Caster Set
Note:
Apply CA Glue to the
chassis edges to seal
Note:
Roll Center base 1,5 ( 3x0,5 )
minimum 0 - max 2,0 ( 4x0,5 )
R/L
Standard wheelbase
Short wheelbase
Remove
as shown
Front spring:
soft Option
medium Option
hard Default
.
0°:16°
Step 1.1
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
- Front Assembly BAG 1
Made in Italy
02
3,
5
3
,
5
1
2
3
R/L
25,3
5
2
4
2
3
1
8
7
6
12
11
14
8
16
15
9
10
2x
13
LOW PROFILE SERVO ONLY
NOT INCLUDED
M3X12
3x6x3
M3 nut
M3X12
M3X8
M3 nut
8
M3 nut
Right move side
Servo shims
1 or 1,5 mm
depending on your
steering servo
Servo Arm:
Short Default
Long Alternative
Step 2.0
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
- Center Assembly BAG 2
Made in Italy
03
5,8 ball
10
9
8
11
6
15
13
12
4
16
3
4
1
4
10
5
2
7
M3X6
M3X6
M3X6
M3X10
3X6x4
5,0 ball
4,5 ball
M3X6
M3X6
10
4
4
4
4
M3X6
M3X6
M3X6
M3X6
M3X6
5
5,0 ball
14
5X1
B
16,5mm max
L.P. Servo Configuration
3,0mm + A
A=depending your servo size
Example: A=B-36
(
3
6
m
m
+
A
)
PREASSEMBLED
Step 3.0
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
- Rear Assembly BAG 3
Made in Italy
04
14
15
16
18
18
12
13
17
11
3
2
4
1
6
9
8
10
21
19
20
23
22
7
M3 nut
M3x10
M3x12
M3x6
M3x10
M3x8
M3x3
3x6x2
1/4x3/8
Flanged
M3x8
5
1/4x3/8
Flanged
5,0 ball
4,2
~~~~ ~~~~
REAR WING
INITIAL SETTING
n4,2
n4,0
1
2
3
4
5
3
2
6
3
8
7
9
10
13
11
12
Note:
Apply silicone grease
Note:
Spring washer
orientation
Push a pin tool through
the Diff. Hub slot into the
hole of the adjusting nut.
Turn clockwise to
tighten or anticlockwise
to loosen the ball diff
.
1/4x3/8
1/4x3/8
1/4x3/8
Spur gear:
64P/86T Option
64P/90T Default
64P/94T Option
5,0 ball
1/4
special shim
M3x3
R
L
12
R
Grease
Threadlock
Step 3.1
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
Made in Italy
05
- Rear Assembly BAG 3
1
1
M2,5x6
M2,5x6
M2x5
M2x5
M2,5x8
shim
1/4x5/16x1/128
( 6,4x8x0,25 )
M3x6
11
8
9
4
2
2
5
6
14
12
13
6
11
11
3
5,8 ball
3x6x4
M3x6
M3x6
M3x12
7
10
M3x10
Side spring:
soft Option
medium Default
hard Option
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
- Shocks BAG 4
Made in Italy
06
4
5
2
1
3
4
5
M3x8
4,5 ball
4,5 ball
Note:
Apply silicone oil
on the inner tube
# 15.000cst
Step 4.0
2
1
3
4
5
6
7
11,5
Apply oil before
assembly
Silicone oil # 2.000cst
5
1
2
3
4
5
6
7
Apply oil before
assembly
13x1,5
Spring chart:
0.22 Silver Option
0.24 Pink Option
0.26 Blue Default
0.28 Green Option
0.30 Yellow Option
Step 5.0
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
Made in Italy
07
- Electronics Assembly BAG 5
M3x10
2
1
9
4
8
3
3
7
6
5
RX
NOT INCLUDED
M3x10
7,4 Short Li-Po Battery
NOT INCLUDED
ESC
NOT INCLUDED
17.5-21.5T Motor
NOT INCLUDED
64P Pinion
NOT INCLUDED
Double Side TAPE
size 25x11
NOT INCLUDED
Double Side TAPE
size 30x20
NOT INCLUDED
Fibre TAPE
NOT INCLUDED
Step 5.1
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
Made in Italy
08
- Final Assembly BAG 5
M3x8
REAR TIRE
NOT INCLUDED
FRONT TIRE
NOT INCLUDED
REAR WING
NOT INCLUDED
FRONT WING
NOT INCLUDED
BODY COLUMN
NOT INCLUDED
M3x8
5x7x0,6
5x10x3
5x10x4
M4x12
M3x12
M4 nut
M4 nut
5x7x1,0
1
2
4
5
6
10
9
7
8
3
6
11
12
13
13
Step 5.2
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
Made in Italy
09
- Final Assembly View -
F101 BLANK SET-UP SHEET
10
Made in Italy
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
.
TOE
FRONT WING
WIDTH SHIM
D.F. LEVEL
BRAND
/degr.
/mm
REAR WING
WIDTH SHIM
D.F. LEVEL
BRAND
/mm
BATTERY POSITION
REAR WING POSITION
OUTER ACK
WING SHIM
HEIGHT SHIM
SIDE SPRING
/mm
/mm
/mm
/mm
/mm
/mm
/mm
SHOCK SHIM
SHOCK ABSORBER
SHOCK SHIM
SERVO ARM
ACK SHIM
LENGHT
PRELOAD
FRONT HEIGHT
MID HEIGHT
REAR HEIGHT
/mm
/mm
/mm
/mm
ARM SHIM
OUTER SHIM
LabF101
LabF101
Capricorn RC - - LabF101 - -
ESC POSITION
CASTER
ROLL C. SHIM
SPRING
SPACER
CAMBER
/degr.
/degr.
R
L
WHEELBASE
1
2
3
4
5
RACE
TRACK
NAME
CITY/
COUNTRY
CONTACT
DATE
QUALIFING
POSITION
BEST LAP
RACE
POSITION
RACE
LENGTH
/min
/sec
TRACK SURFACE
TRACK LAYOUT
TRACTION
CARPET
MIXED
MEDIUM
ASPHALT
FAST
HIGH
TECHNICAL
LOW
SPRING
HOLE
OIL
REBOUND
CENTER SHOCK ABSORBER
OIL
SIDE SHOCK
/CST
/CST /%
DIFF. SETTING
LOOSE MEDIUM TIGHT
GEARING
PINION SPUR GEAR DRIVE RATIO
/T
/T
MOTOR
ESC
BATTERY
BODY
TIRES
ADDITIVE
ADD. TIMING
FRONT
REAR
ADDITIVE
TREATED AREA
- NOTES -
.
.
SERVO ACK POS.
/mm
/mm
/mm
/mm
F101 DEFAULT SET-UP SHEET
11
Made in Italy
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
.
TOE
FRONT WING
WIDTH SHIM
D.F. LEVEL
BRAND
/degr.
/mm
REAR WING
WIDTH SHIM
D.F. LEVEL
BRAND
/mm
BATTERY POSITION
REAR WING POSITION
OUTER ACK
WING SHIM
HEIGHT SHIM
SIDE SPRING
/mm
/mm
/mm
/mm
/mm
/mm
/mm
SHOCK SHIM
SHOCK ABSORBER
SHOCK SHIM
SERVO ARM
ACK SHIM
LENGHT
PRELOAD
FRONT HEIGHT
MID HEIGHT
REAR HEIGHT
/mm
/mm
/mm
/mm
ARM SHIM
OUTER SHIM
LabF101
LabF101
Capricorn RC - - LabF101 - -
ESC POSITION
CASTER
ROLL C. SHIM
SPRING
SPACER
CAMBER
/degr.
/degr.
R
L
WHEELBASE
1
2
3
4
5
RACE
TRACK
NAME
CITY/
COUNTRY
CONTACT
DATE
QUALIFING
POSITION
BEST LAP
RACE
POSITION
RACE
LENGTH
/min
/sec
TRACK SURFACE
TRACK LAYOUT
TRACTION
CARPET
MIXED
MEDIUM
ASPHALT
FAST
HIGH
TECHNICAL
LOW
SPRING
HOLE
OIL
REBOUND
CENTER SHOCK ABSORBER
OIL
SIDE SHOCK
/CST
/CST /%
DIFF. SETTING
LOOSE MEDIUM TIGHT
GEARING
PINION SPUR GEAR DRIVE RATIO
/T
/T
MOTOR
ESC
BATTERY
BODY
TIRES
ADDITIVE
ADD. TIMING
FRONT
REAR
ADDITIVE
TREATED AREA
- NOTES -
.
.
SERVO ACK POS.
~
~
~
~
90
BLUE
8
2.000 30
15.000
3,0
LONG
SHORT
4,0
60,0
5,0
4,0
4,5
5,0
2,0
8,0
5,0
-4,0
2,0
1,5
HARD
2,0
MEDIUM
0
1,5
1,5
1,5
FRONT
REAR
INNER
0,6 0,5
~~~~
0
/mm
/mm
/mm
/mm
30
3,00
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
- Exploded -
Made in Italy
Cap40024
Cap40041
Cap40023
Cap17006
Cap40020-R
Cap40022
Cap40030
Cap40028
Cap22100
Cap40031-R
Cap40033-H
Cap40034
Cap40026
Cap17001
Cap17040
Cap17024
Cap17030
Cap40025
Cap40039
Cap17029
Cap40052
Cap17030
Cap17040
Cap40038-R/L
Cap40020-L
Cap40031-L
Cap17024
Cap17001
Cap22102
Cap22017
Cap40048
Cap17040
Cap2107-B
Cap23032
Cap40027
Cap40029
Cap40018-P
Cap22018
Cap16086
Cap17005
Cap40050
Cap40071-M
Cap40010
Cap40016
Cap17001
Cap17001
Cap17001
Cap40042-1
Cap40042-2
Cap40015
Cap17029
Cap17035
Cap40011
Cap17001
Cap17029
Cap40049
Cap18023
Cap40047
Cap40013
Cap17029
Cap40008
Cap17027
Cap17029
Cap40047
Cap40047
Cap40041
Cap40044
Cap40017
Cap40007
Cap17030
Cap17023
Cap40065
Cap40067
Cap22021
Cap17023
Cap40012
Cap17026
Cap40009-R
Cap17036
Cap17032
Cap40014
Cap17008
Cap22021
Cap40042-3
Cap 2112
Cap22018
Cap16086
Cap 2112
Cap 2112
Cap 434-0,6
+
Cap 434-1,0
Cap40074
Cap17030
Cap17030
Cap18023
Cap40010
Cap17029
Cap17029
Cap17029
Cap17029
Cap17029
Cap17029
12
Cap40009-L
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
- Shocks & axle exploded -
Made in Italy
Cap16085
Cap14036
Cap14033-BB
Cap18503
Cap18507
Cap18506-8
Cap18501
Cap24008
Cap18504
Cap18502
Cap29159
Cap20017
Cap29174
( Blue )
Cap14030-M
Cap14042
Cap40035-3
Cap40035-4
Cap17008
Cap40035-1
Cap40035-2
Cap40035-4
Cap40035-3
Cap40055
Cap40056
Cap40068
Cap40057-90
Cap40058
Cap40068
Cap40056
Cap40059
Cap40068
Cap40069
Cap40060
Cap40061
Cap40062
Cap40064
Cap40063
Cap17006
13
CCCCaaaapppprrrriiiiccccoooorrrrnnnn RRRRCCCC
- Additional Notes -
Made in Italy
14
Loading...