Contact Caple on 0117 938 7420 or for spare parts www.caple.co.uk
In-column wine cabinet
instruction manual
WC6410
Instruction manual WC6410
Please keep this instruction manual for future reference
CONTENTS
Introduction 3
Warnings 4
Electrical shock hazard 5
Environmental protection 7
Installation 8
Operation and settings 10
Functions 12
Storage diagram 12
Internal Light 13
Shelves 13
How to change the door 14
Installation for built-in 16
Care and maintenance 18
Problems / Troubleshooting 20
Defrosting / Condensation 21
Humidity system 21
Technical data 22
2
Instruction manual WC6410
Please keep this instruction manual for future reference
INTRODUCTION
Thank you for buying your new Caple Wine Cabinet.
To ensure that you get the best results from your new purchase, we strongly suggest
that you read this instruction manual thoroughly before use. This manual contains
installation advice, usage instructions and other important facts about your Caple
Wine Cabinet. If treated with care your Caple Wine Cabinet will give you many years
of trouble free use.
3
Instruction manual WC6410
Please keep this instruction manual for future reference
WARNINGS
- To prevent damaging the door gasket, make sure the
door is fully open when pulling shelves out of the rail
compartment.
- The appliance must be positioned so that the plug is
accessible. Release the electric cord and move your
cabinet to its final location. Do not move your cabinet
while loaded with wine as you may distort the body.
- The wine cabinet should be installed in a suitable place
in order to avoid touching the compressor.
- After unpacking, make sure that the appliance is in
perfect order. If you have any doubt, do not use it and
contact your retailer.
- If the supply cord is damaged, it must be replaced by
a Caple service agent or a similarly qualified person in
order to avoid a hazard.
- This product is not designed for commercial use, it is a
household appliance only.
It is not intended to be used in:
•
Staff kitchen areas in shops, offices and other working
environments
•
Bed and breakfast type environments
•
By clients in hotels, motels and any other residential
type environments
4
Instruction manual WC6410
Please keep this instruction manual for future reference
- This appliance is intended to be used exclusively for the
storage of wine.
IMPORTANT
Caple cannot be held liable for any non
compliance with these instructions.
ELECTRICAL SHOCK HAZARD
To reduce the risk of fire, electrical shock, or injury when using
your appliance, follow these basic precautions:
- Read all instructions before using the wine cabinet.
- DANGER or WARNING: Risk of child entrapment.
- Before you throw away your old wine cabinet: Take off
the door, leaving the shelves in place so that children
cannot easily climb inside.
- Never allow children to operate, play with, or crawl
inside the appliance.
- Never clean appliance parts with flammable fluids. The
fumes can create a fire hazard or explosion.
- Do not store or use gasoline or any other flammable
vapours and liquids in the vicinity of this or any other
appliance. The fumes can create a fire hazard or
explosion.
5
Instruction manual WC6410
Please keep this instruction manual for future reference
- The refrigerant of this appliance is R600a, flammable
and explosive articles should not be put in or near the
cabinet, to avoid the risk of fire or explosion.
- This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance.
- Cleaning and user maintenance shall not be made by
children without supervision.
6
Instruction manual WC6410
Please keep this instruction manual for future reference
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for recycling
advice. This appliance is marked according to the European directive on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The symbol
on the product indicates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with
local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this
product, please contact your local council, your household waste disposal service or
the retailer where you purchased the product
CE DECLARATIONS OF CONFORMITY
This appliance has been manufactured to the strictest standards and complies
with all applicable legislation, Low Voltage Directive (LVD) and Electromagnetic
Compatibility (EMC).
7
Instruction manual WC6410
Please keep this instruction manual for future reference
INSTALLATION
Before using your wine cabinet
- Remove the exterior and interior packing.
- IMPORTANT: Before connecting the wine cabinet to the power source, let it stand
upright for at least 12 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
- Clean the interior surface with lukewarm water using a soft cloth.
Before installation, turn the unit off and unplug it from the outlet.
NOTE
To protect the appliance in transit and delivery the door is packed tightly against the
cabinet. When first installed this can mean the door seal appears thinner on one
side of the door due to compression, this is normal and once out of the box it will
relax over a short period of time and the door will return to the normal position. If
you wish to speed up the process you can gently warm the seal with a hair dryer on
a low temperature setting. This can help relax the seal helping it return to normal
thickness a little faster.
INSTALLATION OF YOUR WINE CABINET
- This appliance uses flammable refrigerant. Never damage the cooling pipework
during transportation.
- Locate the wine cooler away from direct sunlight and sources of heat (ovens,
hobs, heaters, radiators, etc.). Never clean appliance parts with flammable fluids.
The fumes can create a fire hazard or explosion. When disposing your appliance,
please choose an authorized disposal site.
- Avoid locating the unit in moist areas.
- It is fitted with a power cord having an earth wire terminating in a 13amp plug.
- Ensure the product is correctly ventilated (see page 16).
- Consult a qualified electrician or service engineer if the earthing instructions are
not completely understood.
- Plug the wine cabinet into an exclusive, properly installed-grounded wall outlet.
Do not under any circumstances cut or remove the third (ground) pin from the
plug. Any questions concerning power and/or grounding should be directed
toward a certified electrician or Caple service.
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.