
Wall chimney extractor
Instruction manual
Models: NOV800 - TAU760
Contact Caple on 0117 938 7420 or for spare parts www.caple.co.uk
www.caple.co.uk

ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for recycling
advice. This appliance is marked according to the European directive on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The symbol
on the product indicates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with
local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this
product, please contact your local council, your household waste disposal service or
the retailer where you purchased the product
CE DECLARATIONS OF CONFORMITY
This appliance has been manufactured to the strictest standards and complies with
all applicable legislation, Low Voltage Directive (LVD) and Electromagnetic
Compatibility Directive (EMC).
3

WARNINGS
* The appliance is not intended
for use by young children or
infirm persons without
supervision. Young children
should be supervised to
ensure they do not play with
the appliance.
If the rating label
in the
extractor shows the symbol,
the appliance is built in class
II° and it does not need any
earth connection.
If the rating label in the
extractor does not show the
symbol , the appliance is
built in class I° and it needs
the earth connection.
The cooking surface
*
and
the lower part of the extractor
must be at a minimum
distance of 500mm
* The air extracted can’t be
conveyed through or into a
duct used to let out fumes
from appliances fed by
energy other than electric
power(eg. centralised heating,
radiators, waterheaters, etc.).
To duct out the air outlet,
*
please comply with the
pertaining rules given by
competent authorities.
* Provide the room with an adequate aeration when an
extractor and appliance fed by
energy other than electric power
(gas, oil, or coal stoves, etc.)
are used simultaneously. The
cooker hood, when evacuating
the extracted air, could generate
a negative pressure in the room
(which can’t exceed the limit of
0.04 mbar, in order to avoid the
extraction of exhausts deriving
from the heat source). Therefore
the room should be provided
with air-intakes to allow a
costant flow of fresh air.
* When performing the
electrical connections on the
appliance, please make sure
that the current tap is provided
with earth connection and that
voltage values correspond to
those indicated on the rating
label placed inside the
appliance itself.
* Before carrying out any cleaning or maintaining operations,
the appliance needs to be
removed from the electric grid. If
the appliance is not provided
with a non-separable flexible
cable and plug, or with another
device ensuring omnipolar
disconnections from the grid,
with an opening distance
between the contacts of atleast
3 mm, then such disconnecting
devices must be suplied within
the fixed installation.
If the
xed appliance is endowed
with a supply cord and a plug,
the appliance has to be put in a
place where the plug can be
reached easily.
4