Caple RFZ70 User Manual

Download

Page 1

Instruction manual for fr

Instruction manual for freezer

Instruction manual for frInstruction manual for fr

eezer

eezereezer

Model code:RFZ70

Contact Caple on 0844 800 3830 or for spare parts www.4caple.co.uk

Page 2

Names

tray

Please

Please read

read this manual before use.

PleasePlease

this manual before use.

readread

this manual before use.this manual before use.

Thank you for purchasing this Caple product.

Attention:

of the Components

Due to continued product development some features and accessories may vary slight to what is detailed below. Please refer to the packing list.

Upper door-mounted

Display control panel

* Please understand the safety instructions before use.

* Please keep this manual for future reference.

* Due to continued product development and improvement the actual product may vary slightly.

WARNING

WARNINGWARNING

1. WARNING Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction.

2. WARNING Do not use mechanical devices or other means to accelerate the defrosting process, other than those

recommended by the manufacturer.

3. WARNING Do not damage the refrigerant circuit.

4. WARNING Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of

the type recommended by the manufacturer.

5. The appliance must be unplugged after use and before carrying out user maintenance on the appliance.

6. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of

Top cover

Ice maker

Ice collector

Freezing drawer

Glass shelf

Freezing drawer

the appliance by a person responsible for their safety.

7. Children should be supervised to ensure that they do not play with the appliance.

8. If the supply cord is damaged, it must be replaced by Caple, its service agent or similarly qualified persons in order to

avoid a hazard.

9. Please dispose of the refrigerator according to local regulators for it use flammable blowing gas and refrigerant. Note: If the top cover, door tray, ice maker, ice collector and freezing drawer are removed according to the instructions, a larger

10. Disconnect the power supply before replacing the lamp.

volume can be available, and there is no effect on the normal functions of this product.

11. Please adhere to local regulations regarding disposal of the appliance for it contains flammable refrigerant and blowing

gas. Before you scrap the appliance, please remove the doors to prevent children trapped.

Lower drawer

Adjusting foot

Page 3

Preparation before using

Warning

WarningWarning

Correct application of the refrigerator

Make sure the refrigerator is correctly and steadily placed

Make sure the refrigerator is correctly and steadily placed on stable flooring

Make sure the refrigerator is correctly and steadily placedMake sure the refrigerator is correctly and steadily placed

on stable flooring,,,, aaaannnndddd tttthhhhaaaatttt aaaallllllll ssssaaaaffffeeeettttyyyy pppprrrreeeeccccaaaauuuuttttiiiioooonnnnssss

on stable flooringon stable flooring

·Unless recommended by the manufacturer, no machinery equipment or other means can be adopted to speed up the

defrosting process.

·Unless recommended by the manufacturer, no electrical appliances can be used in the food compartments.

·The R600a refrigerant and cyclopentane foaming materials used in this refrigerator are all flammable materials, so old

freezers should be isolated from any fire, disposal by burning is forbidden.

NNNNew refrigerator

ew refrigerator

ew refrigeratorew refrigerator

· Before using a new refrigerator, remove all packaging materials, including the base pad, as well as the foam pads and

adhesive tape in the refrigerator.

·Use a damp cloth to clean the refrigerator inside and outside (A small amount of detergent can be added to the warm water

and finally clean water should be used to clean the refrigerator).

·A separate socket with two poles grounded should be prepared, and it should not share the same multipurpose socket with

other appliances.

·Please be sure to connect the earth wire well. The socket must have reliable earth connection.

Transport and placement

Transport and placementTransport and placement

are clearly understood.

are clearly understood.are clearly understood.

1. Power on

1. Power on1. Power on

NOTE:

NOTE: THE PRODUCT MUST STAND IN SITUE FOR 12 HOURS BEFORE SWITCHING ON.

NOTE:NOTE:

After power on, the refrigerator will automatically enter the factory default status.

2. Adding

Adding food

2. 2.

AddingAdding

Recommended

Recommended: Allow the fridge to work for a period of time and the required temperature to be reached or the compressor

RecommendedRecommended

has stopped working for the first time, and then add the food into the refrigerator, which is conducive to the first food

preservation.

·The freezer should have its temperature below –18℃ for long-time preservation of food.

food to

to the refrigerator

food food

the refrigerator

toto

the refrigeratorthe refrigerator

Tips: When the temperature setting is changed or new food is added, the

Tips: When the temperature setting is changed or new food is added, the Tips: When the temperature setting is changed or new food is added, the

refrigerator needs a period of t

refrigerator needs a period of time to have its internal temperature balanced. The

refrigerator needs a period of trefrigerator needs a period of t

time length depends on the change of the temperature setting, the ambient

time length depends on the change of the temperature setting, the ambient time length depends on the change of the temperature setting, the ambient

temperature, the door

temperature, the door----opening frequency and the amount of stored food, etc.

temperature, the doortemperature, the door

ime to have its internal temperature balanced. The

ime to have its internal temperature balanced. The ime to have its internal temperature balanced. The

opening frequency and the amount of stored food, etc.

opening frequency and the amount of stored food, etc.opening frequency and the amount of stored food, etc.

Transport

TransportTransport

·Do not have the refrigerator upside down, horizontally placed, compressed or shaken. When moving the fridge, do not tilt

the product more than a 45 degree angle.

·When moving, do not use excessive pressure on the door or top cover to avoid deformation.

·The refrigerator can be slightly drawn backwards (no more than 20 degrees), so that it could be moved in a short distance

using the rear casters for rolling.

Placement

PlacementPlacement

·The refrigerator should be placed in a well-ventilated place. Keep it away from heat and direct sunlight. Do not situate it close

to damp or water to prevent rusting or the insulation becoming weakened.

·The space above the refrigerator should be no less than 30cm and its two sides and back must be kept no less than 10cm

away from the walls to facilitate the refrigerator door opening and closing and to allow heat dissipation.

·The refrigerator should be placed on a flat and solid ground. (If not, it can be leveled by adjusting the leveling toes)

Note

NoteNote

The power line should not be

The power line should not be compressed

The power line should not be The power line should not be

power line.

power line.power line.

compressed by the r

compressedcompressed

by the refrigerator or other objec

by the rby the r

efrigerator or other objects,

efrigerator or other objecefrigerator or other objec

ts, to

ts, ts,

to avoid any accident

avoid any accident caused by

toto

avoid any accident avoid any accident

caused by damage of the

caused bycaused by

damage of the

damage of the damage of the

·After purchasing pre-frozen food it be kept in the freezer as soon as possible before it defrosts.

·The hot food should be cooled to the room temperature before adding to the freezer.

·Fruit and vegetables should not be kept in the freezer to avoid frost damage, and no glass containers filled with liquid should

be kept in the freezer to avoid the glass bottle or container from smashing when the liquid expands.

·The frozen food should be sorted with the similar food kept together, to help prevent the doors being unnecessarily open for

a long time, wasting cold energy.

FFFFreezer

reezer drawers

reezerreezer

The drawers are used to keep the food frozen, and pieces of meat can be cut into small pieces before storage to facilitate

eating. When taking food, first pull the drawer open, push the tray above the drawer in horizontally, and then take out the

food in the lower drawer.

Note: Remember to shut the freezer drawer after use.

Note: Remember to shut the freezer drawer after use.Note: Remember to shut the freezer drawer after use.

drawers

drawersdrawers

Before

Before connecting

Before Before

power supply.

power supply.power supply.

connecting to the power source, please carefully check whether the re

connectingconnecting

to the power source, please carefully check whether the refrigerator has its voltage range identical to the

to the power source, please carefully check whether the reto the power source, please carefully check whether the re

2 3

frigerator has its voltage range identical to the

frigerator has its voltage range identical to the frigerator has its voltage range identical to the

Page 4

Function introduction

The following funct

The following functThe following funct

The following funct

ion operations

ion operations ion operations

ion operations

must

mustmust

must

be completed in the ON status.

be completed in the ON status.be completed in the ON status.

be completed in the ON status.

4 5

1. Buttons

1. Buttons1. Buttons

A. Super FRZ – Quick-freeze mode B. ON / OFF - Power ON / OFF

C. ∧ temperature adjustment UP / Quick-freeze adjustment UP

D. ∨ temperature adjustment DOWN / Quick-freeze adjustment DOWN

2222....DDDDisplay functions

isplay functions

isplay functions isplay functions

1. Temperature zone digital display

2. Centigrade icon

3. Super-freeze icon

3333.... Display control

Display control

Display controlDisplay control

· Initial power on: Full display for 3 seconds, at the same time a starting-up tone can be heard and the display with show the

freezer default temperature of -18˚C.

· Display for normal operation:

Temperature display: will show the set temperature, if there is a malfunction it will display the error code as a priority.

· Display control:

1. In the normal mode, if the door is not opened and there is no operation of any button, the screen will go out after 30

seconds;

2. If the door is open, the display screen will always be light, and 30 seconds after the door is closed, the screen will go out;

3. When the “visible failure code” type failure occurs, the screen will automatically display once, and go out in 30 seconds (If

the buzzer continues to ring once you have been alerted to the malfunction, press any button to cancel it).

4. OOOOperation

peration

4. 4.

perationperation

····Start

Start up

up and shutdown

StartStart In the ON mode, if the ON / OFF key (B-key) is pressed for 3 seconds, the OFF tone will sound with the OFF setting effective immediately; In the OFF mode, if the ON / OFF key (B-key) is pressed for 3 seconds, the ON tone will sound with the ON setting effective immediately; If the ON / OFF key is pressed continuously for 3 seconds to enable the OFF function, the display screen will go out, except for the ON / OFF key (B-key), other keys will stop functioning, and the compressor, defrosting heater, door lamp and other functions will immediately shut down; press the ON / OFF key continuously for 3 seconds to enable the ON function, and if it was working in the super-freeze mode before shutdown, the display screen will show the super-freeze initially set; otherwise, the display screen will show the temperature previously set, and all the functions will work based on the settings before shutdown.

and shutdown

upup

and shutdownand shutdown

Function introduction

·Enter the

·Enter the Super

·Enter the ·Enter the

If the Super FRZ (A-key) is pressed continuously for 3 seconds, it will enter the Super-Freeze mode, the Super-Freeze icon will

light up, the display screen will show the default Super-Freeze time of 6 hours, and you can press the temperature adjustment

∧

(C-key) or the temperature adjustment ∨ (D-key) to adjust the Super-Freeze time by 6 hours within the range of 6-48

hours. If there is no key pressed in 5 seconds, it will automatically recognize to show “- 24℃”; within 5 seconds, you can press

the Super FRZ key (A-key) for manual confirmation to show “- 24℃”, and the refrigerator will be working in the Super-Freeze

mode.

Note: The refrigerating capacity marked in the nameplate is the test result when the above

Note: The refrigerating capacity marked in the nameplate is the test result when the above Super

Note: The refrigerating capacity marked in the nameplate is the test result when the above Note: The refrigerating capacity marked in the nameplate is the test result when the above hours.

hours.

hours.hours.

Quit

Quit the

QuitQuit

After the Super

for 3 seconds, or the user presses the key to change the set temperature, the Super

Super

Super----FFFFrrrreeze

SuperSuper

If the Super

Note: During operation in the Super

working in the Super

TTTTemperature setting

emperature setting

emperature settingemperature setting

Press the temperature adjustment ∧ key (C-key) or∨ key (D-key) to set the temperature. The temperature icon will flash in

time of temperature setting, with the range between -16 and -24℃ (circulating adjustment unavailable); in 5 seconds, it will

quit to have the setting effective. (Within 5 seconds after setting of the temperature, you can also manually confirm the set

state by pressing the A key or B key to have the setting effective).

Super----Freeze

Freeze mode

SuperSuper

FreezeFreeze

the Super

Super----FFFFrrrreeze

the the

SuperSuper

Super----FFFFrrrreeze

SuperSuper

eeze icon will go out.

eezeeeze

Super----FFFFrrrreeze

SuperSuper

eeze mode

mode

eezeeeze

modemode

eeze mode is enabled, the set Super

eezeeeze

eeze mode is quitted, it will work based on the mode previously set.

eezeeeze

Super----FFFFrrrreeze

SuperSuper

mode

modemode

Super----FFFFrrrreeze

SuperSuper

Super----FFFFrrrreeze

SuperSuper

eeze mode when started again later.

eezeeeze

eeze mode, if the OFF button is pressed or the power supply is cut off, it will still be

eezeeeze

eeze time is over, or the Super FRZ key (A-key) is pressed continuously

eezeeeze

Super----FFFFrrrreeze

SuperSuper

eeze mode can be quitted and the

eezeeeze

Super----Freeze

Freeze mmmmooooddddeeee iiiissss sssseeeetttt aaaassss 44448888

SuperSuper

FreezeFreeze

5. Lighting control

5. Lighting control5. Lighting control

When the freezer door is opened, the lamp will light up; when the freezer door is closed, the lamp will go out.

6. Door open and door open

6. Door open and door open alarming control

6. Door open and door open6. Door open and door open

When the door is opened a bell can be heard. If the door is open for a consecutive 120 seconds, it will sound the alarm as a

prompt once every 2 seconds until the door closed. Press any key to disable the door open alarm.

alarming control

alarming controlalarming control

7. Power

7. Power----off memory

7. Power7. Power

·When the power supply is lost to this appliance the fridge has an internal memory that will remember the last settings before

the power was lost. When the refrigerator is switched back on the last settings will be selected.

·Initial power-up: The fridge has the set temperature of – 18℃.

·Memory: It includes the set temperature, High Humidity mode and the cumulative working time of the compressor.

For example: If the power is cut off in the Super Freeze state, it will be working based on the “Super Freeze” mode after

off memory and

off memoryoff memory

and Initial power

andand

Initial power----up

Initial powerInitial power

upup

power-on.

Page 5

Function introduction

Considerations

8. HHHHigh

igh temperature

8. 8.

When the temperature is above － 8 ℃ for 6 hours or more, the high-temperature warning will sound. The buzzer will beep

10 times once every second, and 10 times every 30 min. The temperature display area will flash to show the failure code (E9);

the warning will be disabled when the temperature is below －12 ℃. Press any key to cancel the warning, but the failure

temperature warning

ighigh

temperature temperature

warning

warningwarning

Do not dismantle or attempt a repair on this appliance. Please contact Caple service to arrange a call out.

Use the 10A or above standard three-hole power socket. The socket must be well earthed

code display state is not cancelled, until the failure is solved.

9. Failure

Failure prompts

9. 9.

FailureFailure

Note: When a failure occurs, it will alternatively display the failure code, and after the failure is solved, the alarm will be

automatically cancelled or any display control icon can be pressed to cancel the alarm. When a failure occurs, it will take the

priority to display the failure code until the failure is solved, or the set temperature and the Super-Freeze icon cannot be

displayed.

If the failure continues and cannot restore automatically, please contact the Caple after-sales department or professional

service engineer for maintenance.

10. Compulsory defrosting

10. Compulsory defrosting10. Compulsory defrosting

Press the temperature adjusting “∧” key and the temperature adjusting “∨” key for 3 seconds to enter the compulsory

defrosting mode. The LED temperature zone always displays “3” at the top, but there is no display at the bottom. After the

compulsory defrosting mode is enabled, the compressor and fan will stop immediately; in time of compulsory defrosting

operation, press the temperature adjusting “∧” key and the temperature adjusting “∨” key for consecutive 3 seconds or the

prompts

promptsprompts

Failure

Code

E2 Temperature sensor failure E6 Communication failure

E5 Defrosting sensor failure E9 F high-temperature alarm

E7 Ambient temperature sensor

Description Failure

Code

EC EEPROM circuit failure

failure

Description

Please do not use any flammable solvent in the vicinity of the refrigerator, so as to avoid fire.

Do not allow any child climb into or climb on the appliance to prevent the child being trapped in the refrigerator or hurt due to falling.

Please do not keep too much food in the refrigerator.

When the refrigerator is damaged or not in normal operation, do make sure to cut off the power supply and notify the local service centre.

Please do not keep flammable, explosive, volatile or corrosive goods into the refrigerator, to cause damage or fire accident. Please do not put any bottle or

Please do not put heavy things on the refrigerator. Otherwise, it may easily fall and cause damages, when the door is closed.

Please do not have the door or drawer open long or frequently to avoid weakening the efficiency of the whole machine and increasing the load of its operation.

closed container filled with liquid into the freezer to avoid other damages due to the container bursting.

Please do not splash any water onto the top and rear, so as not to weaken the effect of electrical insulation.

conditions for exit is satisfied, it will quit the compulsory defrosting mode.

Note:

Note: Note: This product is for household use only, as the national standard requires, the household refrigerators can only be used to store food, but for other purposes, such as storing blood, drugs and biological products, etc.

Page 6

Maintenance

Cleaning

CleaningCleaning

Use dry towels to wipe off the fingerprints left on the panel. Regularly clean the refrigerator rear part and the ground. The refrigerator should have its interiors frequently cleaned in order to avoid odour. While cleaning, please unplug the power, use soft towels and neutral detergents, and finally use clear water to clean it.

Do not use the following materials to clean the refrigerator:

Do not use the following materials to clean the refrigerator:Do not use the following materials to clean the refrigerator:

·Alkaline or weakly alkaline cleaning agent; (The container and the plastic components may crack)

·Soap powder, light gasoline, banana oil, alcohol and so on; (The plastic parts may be damaged)

·If dirtied with edible oil or sauce, please erase it. (The plastic components may crack)

LLLLight

ight and replacement

and replacement

ight ight

and replacementand replacement

If the lights fail, please contact Caple service (the number can be found on the front of the manual).

Shutdown

ShutdownShutdown

No use for a prolonged period

No use for a prolonged period:::: You should unplug the power, so as to avoid electric shocks or fires due to power line aging;

No use for a prolonged periodNo use for a prolonged period clean the refrigerator inside; let the doors open for a period of time until the interior is completely dry.

Power failure:

Power failure: When the power fails, do try to reduce the number of times the door is opened; it is not appropriate to add

Power failure: Power failure: fresh food.

Disposal

Disposal: If a refrigerator is discarded, its door seal must be removed to prevent any child entering and being sealed in the

DisposalDisposal refrigerator.

Changing the door handing

1. Remove the two screw caps and the two hinge end

Remove the two screw caps and the two hinge end caps on the top decorations (when the door is opened

1.1.

Remove the two screw caps and the two hinge endRemove the two screw caps and the two hinge end

Left hinge endcap

2 Remove the roof decorative components

2 Remove the roof decorative components2 Remove the roof decorative components

caps on the top decorations (when the door is opened to the

caps on the top decorations (when the door is opened caps on the top decorations (when the door is opened

Screw cap

Right hinge endcap

Roof decoration

Harness

to the rrrriiiigggghhhhtttt....))))

to the to the

Roof decoration

3. Remove the two screws to fi

3. Remove the two screws to fix the

3. Remove the two screws to fi3. Remove the two screws to fi finally take the hinge out from the door.

finally take the hinge out from the door.

finally take the hinge out from the door.finally take the hinge out from the door.

Two screws

x the top hinge

top hinge, draw the

x the x the

top hingetop hinge

, draw the top hinge

, draw the , draw the

top hinge oooouuuutttt ffffrrrroooommmm tttthhhheeee ssssiiiiddddeeee,,,, rrrreeeemmmmoooovvvveeee iiiitttt ttttooooggggeeeetttthhhheeeerrrr wwwwiiiitttthhhh tttthhhheeee ddddoooooooorrrr,,,, aaaannnndddd

top hingetop hinge

Hinge

8 9

Page 7

Changing the door handing

4. Reassemble the

4. Reassemble the bottom hinge

4. Reassemble the 4. Reassemble the

5. Reassemble the

5. Reassemble the top hinge

5. Reassemble the 5. Reassemble the

bottom hinge shaft: remove the original shaft of the hinge and relocated it as shown in the

bottom hingebottom hinge

top hinge shaft: first remove the hinge shaft and screw this shaft from the other end of the screw hole.

top hingetop hinge

shaft: first remove the hinge shaft and screw this shaft from the other end of the screw hole.

shaft: first remove the hinge shaft and screw this shaft from the other end of the screw hole.shaft: first remove the hinge shaft and screw this shaft from the other end of the screw hole.

shaft: remove the original shaft of the hinge and relocated it as shown in the figure.

shaft: remove the original shaft of the hinge and relocated it as shown in the shaft: remove the original shaft of the hinge and relocated it as shown in the

figure.

figure.figure.

Changing the door handing

7. Mount the

7. Mount the bottom hinge

7. Mount the 7. Mount the

8. First mount the

8. First mount the top hinge

8. First mount the 8. First mount the the

the bottom hinge

bottom hinge, and press the

the the

bottom hingebottom hinge

bottom hinge on the right side of the cabinet.

bottom hingebottom hinge

top hinge iiiinnnn tttthhhheeee ccccoooorrrrrrrreeeessssppppoooonnnnddddiiiinnnngggg sssshhhhaaaafffftttt hhhhoooolllleeee oooonnnn tttthhhheeee rrrriiiigggghhhhtttt ssssiiiiddddeeee ooooffff tttthhhheeee ddddoooooooorrrr uuuuppppppppeeeerrrr ccccoooovvvveeeerrrr,,,, ppppllllaaaacccceeee tttthhhheeee ddddoooooooorrrr bbbbooooddddyyyy oooonnnn

top hingetop hinge

, and press the top hinge

, and press the , and press the

on the right side of the cabinet.

on the right side of the cabinet.on the right side of the cabinet.

Bottom hinge

top hinge into the hinge fixation column to fix the hinge.

top hingetop hinge

into the hinge fixation column to fix the hinge.

into the hinge fixation column to fix the hinge.into the hinge fixation column to fix the hinge.

6. Mount the left

6. Mount the left top hinge

6. Mount the left 6. Mount the left

top hinge fixation column on the right.

top hingetop hinge

fixation column on the right.

fixation column on the right.fixation column on the right.

9. Mount the roof decoration, th

9. Mount the roof decoration, the screw caps and the hinge end

9. Mount the roof decoration, th9. Mount the roof decoration, th

e screw caps and the hinge end cap.

e screw caps and the hinge ende screw caps and the hinge end

cap.

cap.cap.

Page 8

R & F connecting

Page 9

Troubleshooting

Problem

Possible Reasons and Items to be Checked

No power

the power supply is connected and

is the plug inserted

Poor refrigeration

the temperature is set too high

Too noisy

the floor

flat and the refrigerator is steadily placed

Bad smell

The odorous food should be tightly wrapped

Climate Class

SN/T

Pro

tection Against

Electric Shock

Rated Voltage/Frequency

AC220

240V/50Hz

Rated Power

75W

Defrost Power

250W

Lamp Rated Power

1.1W

Rated Current

1.2A

Foaming Agent

Cyclopentane

Energy Consumption

0.677

kW h/24h

Energy Efficiency Class

A++

Total

Gross Volume

Gross Freezer Volume

Total Storage Volume

260L

Freezer Storage Volume

260OL

Refrigerant, Amount

R600a

,62g

Freezing Capacity

160kg/24h

Net Weight

81kg

Dimensions

W595xD69

5xH1855

Compressor

NE112Y

fuse

Defrosting sensor

Compressor

Protector

green

Before request for repair, please read the following contents carefully.

Before request for repair, please read the following contents carefully.Before request for repair, please read the following contents carefully.

correctly

Is the voltage is too low

Is too much food been stored

Has any hot food been added

Is the door is opened / closed too frequently

Is the door closed correctly

Is any heat source is kept around the refrigerator

Does the refrigerator have its accessories correctly positioned

Technical Parameters and schematic diagram

Check whether there is any bad food

The refrigerator inside needs cleaning

If the above items have been checked but there is no improvement, please contact the Caple after-sales service department.

If damaged, the power cord must be replaced by the servicemen designated by this Caple to avoid potential dangers.

Non

Non----fault Phenomenon

NonNon

The refrigerant liquid in the capillary tubes of the refrigerator flows at a high speed, and sometimes there may be a few air

bubbles inside. Therefore, some irregular noises will be produced at the exit. When the refrigerator is in rapid refrigeration, the

wind noise will be heard when the freezer door is opened, and that is the sound of the high-speed fan.

If the air is much too humid, the refrigerator door may be wetted around, and dry cloth can be used to wipe it.

fault Phenomenon

fault Phenomenonfault Phenomenon

Defrosting heater

Display control panel

Control mainboard

F sensor

Yellow

Defrosting

Blue

Fan motor

Lighting

lamps

Lamp switch

Brown

Running capacitor

Starter

Power plug

Blue

Page 10

Corre

Correct Disposal of this product

ct Disposal of this product

CorreCorre

ct Disposal of this productct Disposal of this product

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout

the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,

recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,

please use the return and collection systems or contact the retailer where the product was purchased. They

can take this product for environmental safe recycling.

Requesting assistance or service

If you have any doubt or require extra assistance, please call:

Caple Service:

Telephone: 0844 800 3830

Email: service@caple.co.uk

Caple

Fourth Way

Avonmouth

Bristol

BS11 8DW

www.caple.co.uk