Caple RFF60 User Manual
Instruction manual for fridge freezer
Model code:RFF60
Thank you for purchasing our Caple fridge freezer.
Please note:
Before using, please pay attention to the Precautions for safe use.
Please keep the User Manual for future reference.
As we are continuously improving our products, your actual product may
vary slightly to what is shown in the manual.
Kind Reminder
Dear Sir/Madam:
The film on the door is plastic protective film.
This is in place to protect the product during transportation and can
be removed once the product has been moved into its final position.
Name of Each Constructional Element
Due to continued product development some features and parts of your
refrigerator may be different from this diagram. The
packing list enclosed with your refrigerator will be correct. We apologise for
any
inconvenience caused.
Lamp switch
Glass Rack
Refrigeration
Side Lights
Cover Plate of Fruit
& Vegetable Box
Light Wave Retain
Freshness Light
Fruit &
Vegetable Box
chill compartment
drawer
Freezer Upper Door
Freezer Lower Door
Power Line
Large Bottle Frame I
Large Bottle shelf II
Egg Holder (inner
bottle frame)
Large Bottle shelf III
Drawer Handle (Steel plate door)
Leveling Legs
Tray Drawer
Freezer Upper Drawer
Freezer Lower Drawer
1
Preparation before Using
Products Characteristics
1. Three Temperature Zones
this product has a refrigeration, chilling compartment and freezing zone to
satisfy various needs of food storage.
Refrigerator (2~8 C), for the refrigerator of different foods, with adjustable
temperature settings.
Chill compartment (-2~3 C), store different food, more convenient for choosing,
and also can set each temperature according to the needs.
Freezer (-16~-24 C), adjustable temperature.
Each temperature chamber is separately controlled, and adjustable.
2. Microcomputer Control, Intelligent and Accurate Tempreature
The intellectual computer control automatically adapts to temperature changes
in the environment.
A clear, easy to read LED digital display.
Automatic alarm function when the refrigerator door is not properly closed or
the temperature in the chamber is too high.
Quick freeze, auto mode and energy saving functions make this product conve-
nient to use.
The power failure memory can automatically recover the last setting selected
prior to the power cut.
Fault prompt functions, to allow for easy maintenance.
Warning
DO NOT use any other equipment to speed the defrosting process other than
what has been suggested by Caple.
No other electrical equipment can be used in the food storage compartments
except those the manufacturer suggests.
The R600a refrigerating fluid and cyclopentane foam materials which this fridge
used are flammable, when the fridge reaches the end of its life it should not be
burnt. It should be disposed of correctly, please contact your local council or
recycling centre for advice.
Unpacking your new appliance
Remove all packaging (including the base, foam pad and gummed paper in the
fridge) before the use of the fridge;
Use a damp cloth to wipe up both in and outside of the fridge (a bit of detergent
can be added to the warm water, and use clear water only to wipe round a final
time.)
Prepare individual dipolar earthing socket, and do not share the socket with
other electrical equipment;
Please connect the earth wire well, the earthing polar of the socket must have a
reliable earthing wire.
2
Preparation before Using
Transportation and placement of the fridge
Transportation
Keep the appliance upright and avoid squeezing or vibration during transportation. Avoid a slant angle over 45 degree during handling.
Avoid the door or top cap from being under excessive stress when moving
otherwise, it may become deformed
Placement
The fridge should be placed in a well ventilated place. Far away from any heat
source, also keep it out of direct sunlight. Do not place the appliance in a wet or
moist area, this is to avoid corrosion and weakening of the insulation.
There should be a space not less than 30cm from the top of your refrigerator and
not less than 10cm from both sides and the back of the refrigerator to the
adjacent
walls respectively. This requirement is to allow for the door to open fully and
also for the required heat emission.
The fridge should be placed on flat, solid ground (if uneven, it can be adjusted by
the leveling legs)
NOTE:
Make sure the power wire is not damaged or trapped by the refrigerator or
other
objects so as to avoid accidents arising from power wire faults. Please check
the voltage scope of your refrigerator against the actual power supply before
switching it on.
Correct Use of the Fridge
Ensure the fridge is correctly installed and you understand all the safety precautions
before use.
1.Connect to the power supply
The appliance will automatically enter the factory settings once plugged in and
switched on. The temperatures can be adjusted as shown on pages 5 to 7.
2.Fridge modes
Artificial Intelligence... This fridge freezer is equipped with a computer control
which automatically adapts to changes in the ambient temperature keeping the
storage temperature consistent.
Intelligent mode: We suggest you use this setting if you have no special requirement. This will allow the fridge and freezer settings to be automatically
controlled by the internal computer.
Power saving mode: If you are going on holiday or have very little food to store
you can use this setting. The appliance will run using less energy.
Manual mode: you can adjust the temperature of each storage chamber according to your need.
3
Correct Use of the Fridge
3.Adding food to the fridge
Suggestion: Allow the fridge to reach the set temperature or when the compres-
sor stops working for the first time before adding food. This will help cool the
food faster retaining the freshness.
NOTE: The interior temperature may require a certain period of time to reach
balance if the setting temperature is changed or other food is put into the
refrigerator. Such a period of time depends on the change to the set temperature, the surrounding
temperature, opening frequency, the amount of stored food etc.temperature,
opening frequency, the amount of stored food etc.
Refrigerator
Please put fresh food for short term storage in the fridge. The temperature of
the refrigerator is around 2 - 8 degrees C, which helps to restrict the growth of
bacteria, but it is not recommended for long term storage.
Cooked food should be put into the refrigerator after cooling.
We recommend wrapping or covering the food well prior to storing the food.
Vegetables can contain moisture and moisture can increase the speed the
vegetables go off. Keeping the food well packaged can increase the storage time
for certain types of vegetables.
Temperature controlled compartment
The temperature of this compartment can be set between -2˚C and 3˚C. This
function can meet your needs for storing different foods and drinks. To avoid
frost damage and rot, each time you adjust the temperature please clean the
compartment and categorise the stored food to ensure all the food can be stored
at the newly selected temperature.
Different temperatures are suitable for storing different food and drinks as
follows:
1) 0˚C : fresh fish, fresh meat, eggs and other foods
2) 2˚C - 3˚C : carbonated drinks such as coke
Freezer
Generally, the temperature of freezer is under -18 C,food that needs to be stored
for long periods of time should be stored in the freezer.
Ready frozen food should be put in the freezer as quickly as possible to prevent it
thawing.
Hot food should be cooled to room temperature before it is put into freezer.
Some fruit and vegetables should not be stored in the freezer as this can damage
them. DO NOT put glass bottles or other containers filled with water or other
liquids into the freezer as the liquid will expand causing the glass to break.
Store the food in such a order to allow easy access reducing the amount of time
the door is open. This can help to save energy.
Loading...