Caple GR1201 Gastron Instruction Manual

Thank you for choosing our product. From now on, cooking will always be pleasantly creative with your new cooker. We recommend carefully reading all the instructions in this manual, which includes detailed information about the most suitable conditions for using the cooker correctly and safely. These instructions also help you to become familiar with each component. Useful advice is given for using recipients, utensils, positions of guides and control settings. The correct cleaning operations contained in this manual allow you to maintain the cooker's performance unchanged over time. The individual sections are set out in order to allow you to become familiar with all the functions in the cooker. The text is easy to comprehend and is accompanied with detailed images and simple pictograms. Reading this manual thoroughly will provide you with the answer to any question that may arise regarding the correct use of your new cooker.

INSTRUCTIONS FOR THE INSTALLER: for the qualified technician who is in charge of adequately checking the gas system, installing, commissioning and testing the appliance.

INSTRUCTIONS FOR THE USER: include suggestions, the description of the controls and the correct cleaning and maintenance operations for the appliance.

Contents

1.General information ______________________________________ 5

1.1 Technical service _________________________________________________________ 5

2.Warnings for safety and use________________________________ 6

3.Installation______________________________________________ 8

3.1 General warnings _________________________________________________________ 8

3.2 Fitting the front moulding ___________________________________________________ 9

3.3 Fitting the adjustable feet ___________________________________________________ 9

3.4 Electric connection _______________________________________________________ 10

3.5 Power consumption of the vitroceramic hob____________________________________ 12

3.6 Power consumption of the volcanic rock grill ___________________________________ 12

3.7 Ventilation requirements___________________________________________________ 13

3.8 Gas connection__________________________________________________________ 13

3.9 Stability chain ___________________________________________________________ 14

3.10 Gas regulations _________________________________________________________ 15

3.11 Connecting to LPG_______________________________________________________ 15

4.Final operations ________________________________________ 16

4.1 Fixing the free-standing cooking hob _________________________________________ 16

4.2 Levelling the cooker to the floor _____________________________________________ 16

5.Description of controls ___________________________________ 17

5.1 The front panel __________________________________________________________ 17

6.Using the cooking hob ___________________________________ 23

6.1 Switching on the burners __________________________________________________ 23

6.2 Switching off the burners __________________________________________________ 23

7.Using the deep fryer _____________________________________ 24

7.1 Before switching on the deep fryer___________________________________________ 24

7.2 How to fry ______________________________________________________________ 24

7.3 Indicative frying times_____________________________________________________ 25

7.4 Switching off____________________________________________________________ 25

8.Using the fry-top / steak grill _______________________________ 26

8.1 Before switching on the fry-top / steak grill_____________________________________ 26

8.2 Switching on____________________________________________________________ 26

8.3 Energy regulator table ____________________________________________________ 26

8.4 Switching off____________________________________________________________ 26

9.Using the volcanic rock grill _______________________________ 27

9.1 Before switching on the grill ________________________________________________ 27

9.2 Switching on____________________________________________________________ 27

9.3 Energy regulator table ____________________________________________________ 28

9.4 Switching off____________________________________________________________ 28

10.Using the vitroceramic hob _______________________________ 29

10.1 General warnings ________________________________________________________ 29

10.2 Switching on____________________________________________________________ 29

10.3 Switching off____________________________________________________________ 29

Contents

11.Using the ovens _______________________________________ 30

11.1 General warnings ________________________________________________________ 30

11.2 Drawer and storage compartment ___________________________________________ 30

11.3 Using the electric multifunction oven _________________________________________ 30

11.4 Using the auxiliary oven with natural convection ________________________________ 32

11.5 Using the convection electric oven___________________________________________ 33

11.6 Using the grill oven with natural convection ____________________________________ 34

12.Cooking suggestions____________________________________ 35

12.1 Suggestions for using the hob burners correctly ________________________________ 35

12.2 Suggestions for using the deep fryer correctly__________________________________ 35

12.3 Suggestions for using the fry-top / steak grill correctly____________________________ 35

12.4 Suggestions for using the volcanic rock grill correctly ____________________________ 35

12.5 Suggestions for using the vitroceramic hob correctly_____________________________ 36

12.6 Suggestions for using the oven correctly ______________________________________ 36

13.Cleaning and maintenance _______________________________ 39

13.1 Cleaning stainless steel surfaces____________________________________________ 39

13.2 Cleaning enamelled surfaces_______________________________________________ 39

13.3 Cleaning the knobs and the control panel _____________________________________ 39

13.4 Cleaning the grids and burners _____________________________________________ 39

13.5 Cleaning the igniter plugs and thermocouples __________________________________ 40

13.6 Cleaning the deep fryer ___________________________________________________ 40

13.7 Cleaning the fry-top / steak grill _____________________________________________ 40

13.8 Cleaning the volcanic rock grill______________________________________________ 41

13.9 Cleaning the vitroceramic hob ______________________________________________ 41

13.10 Cleaning the oven________________________________________________________ 42

13.11 Replacing the oven light bulb _______________________________________________ 42

14.Special maintenance____________________________________ 43

14.1 Removing the oven door __________________________________________________ 43

14.2 Removing the side rack-holder frames________________________________________ 44

14.3 Removing and cleaning the inside oven fan____________________________________ 44

Warnings

This user’s manual is an integral part of the product purchased. The user must conserve the manual correctly so that it is always available for consultation during the use and maintenance of the product. Keep this user’s manual for future reference. If the product is resold, the manual must be transferred to any subsequent owner or user of the product.

CLASSES OF APPLIANCES

The cooking appliances described in this operating manual belong to the following installation classes:

x Class 1: non-flush-mounted cooking appliance;

x Class 2 – subclass 1: cooking appliance flush-mounted between two

units, made up of a single unit, but which can also be installed so that the side walls are accessible.

1. General information

This product conforms to the requirements of the following European directives:

x 73/23/EEC for "Low Voltage". x 89/336/EEC for "Electromagnetic Disturbance". x 90/396/EEC for "Gas Appliances". x 89/109/EEC for "Material in contact with Food".

The above mentioned directives also conform to Machine directive 98/37/EC.

1.1 Technical service

Before leaving the factory, this appliance has been tested and set up by qualified, specialist personnel, so as to guarantee the best operating results. Each repair or adjustment that may subsequently be necessary must be carried out with the utmost care and attention. We therefore recommend always contacting the Dealer where the appliance was purchased or your nearest Service Centre, specifying the type of problem and the appliance model.

Warnings

2. Warnings for safety and use

THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. IT SHOULD BE KEPT IN GOOD CONDITION AND CLOSE TO THE APPLIANCE FOR THE WHOLE LIFECYCLE OF THE COOKER. WE RECOMMEND READING THIS MANUAL VERY CAREFULLY BEFORE USING THE COOKER. IN CASE AN ADDITIONAL JETS KIT IS GIVEN AS ACCESSORY TO THE COOKER, WE RECOMMEND KEEPING AND PRESERVING IT. THE INSTALLATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL AND IN COMPLIANCE WITH CURRENT STANDARDS. THIS APPLIANCE IS FOR DOMESTIC USE AND CONFORMS TO THE EEC DIRECTIVES CURRENTLY IN FORCE. THE APPLIANCE IS BUILT FOR CARRYING OUT THE FOLLOWING FUNCTION: COOKI NG AND HEATING FOOD; ANY OTHER USE IS TO BE CONSIDERED IMPROPER. THE MANUFACTURER DECLINES ANY RESPONSIBILITY SHOULD THE APPLIANCE BE

USED FOR PURPOSES OTHER THAN THOSE INDICATED.

AT THE MOMENT OF PURCHASE, THE USER ASSUMES DIRECT RESPONSIBILITY FOR THE PRODUCT AND MUST THEREFORE MAKE SURE THAT, WITH NORMAL USE, NO INSTABILITY, DEFORMATION, BREAKAGE OR WEAR OCCURS OVER TIME THAT WOULD REDUCE PRODUCT SAFETY.

THIS PRODUCT IS DESIGNED AND MANUFACTURED TO OPERATE SAFELY AND DOES NOT POSE ANY DANGERS TO PEOPLE, ANIMALS, AND OBJECTS.

DO NOT LEAVE ANY PIECES OF THE PACKING UNATTENDED IN THE HOME. SEPARATE THE VARIOUS PACKING MATERIALS AND DELIVER THEM TO THE NEAREST RECYCLING CENTRE.

THE EARTH CONNECTION IS OBLIGATORY CONFORMING TO THE MODALITIES ENVISAGED BY THE SAFETY STANDARDS OF THE ELECTRICAL WIRING SYSTEM.

THE PLUG TO BE CONNECTED TO THE POWER SUPPLY CABLE AND THE RELATIVE SOCKET MUST BE THE SAME TYPE AND MUST COMPLY WITH CURRENT STANDARDS. AFTER INSTALLING THE APPLIANCE MAKE SURE THAT THE PLUG IS ACCESSIBLE TO ALLOW THE PERIODICAL CHECK-UP.

DO NOT PULL OUT THE PLUG BY PULLING THE CABLE.

SHOULD THE GAS TAPS BE DIFFICULT TO ROTATE, LUBRICATE THEM USING A SPECIFIC PRODUCT FOR HIGH TEMPERATURES.

CONTACT THE TECHNICAL SERVICE FOR THIS OPERATION.

IMMEDIATELY AFTER INSTALLATION, TEST THE APPLIANCE BRIEFLY BY FOLLOWING THE INSTRUCTIONS SHOWN BELOW. IN THE EVENT OF A MALFUNCTION, DISCONNECT THE APPLIANCE FROM THE MAINS AND CONTACT YOUR NEAREST TECHNICAL SERVICE CENTRE.

DO NOT ATTEMPT TO REPAIR THE APPLIANCE.

EACH TIME YOU FINISH USING THE COOKING HOB, ALWAYS CHECK THAT THE CONTROL KNOBS ARE IN "ZERO" POSITION (OFF).

NEVER PUT INFLAMMABLE OBJECTS INTO THE OVEN: SHOULD IT BE ACCIDENTALLY SWITCHED ON, A FIRE MAY BREAK OUT. IN THE EVENT OF A FIRE: CLOSE THE MAIN GAS SUPPLY AND CUT OFF THE ELECTRIC CURRENT. DO NOT THROW WATER ON BURNING OR FRYING OIL. DO NOT STORE INFLAMMABLE OBJECTS OR AEROSOL CANS NEAR THE APPLIANCE AND DO NOT SPRAY NEAR THE BURNERS WHEN SWITCHED ON. DO NOT WEAR BAGGY CLOTHES OR ACCESSORIES THAT ARE NOT CLOSE TO THE BODY WHEN THE BURNERS ARE SWITCHED ON: SERIOUS INJURIES CAN BE CAUSED BY BURNING FABRIC.

Warnings

DO NOT REST SAUCEPANS THAT DO NOT HAVE A PERFECTLY SMOOTH, EVEN BASE ON THE COOKING HOB.

DO NOT USE RECIPIENTS OR STEAK GRILLS THAT EXCEED THE OUTER PERIMETER OF THE COOKING HOB.

THE IDENTIFICATION PLATE WITH THE TECHNICAL DATA, SERIAL NUMBER AND THE MARK IS CLEARLY VISIBLE ON THE BACK OF THE APPLIANCE.

THE PLATE MUST NEVER BE REMOVED.

THE APPLIANCE SHOULD ONLY BE USED BY ADULTS. DO NOT ALLOW CHILDREN TO APPROACH OR PLAY

WITH THE APPLIANCE. NEVER STORE ITEMS THAT CHILDREN MAY ATTEMPT TO REACH ABOVE THE APPLIANCE. THE HEATING UP OF SOME PARTS OF THE APPLIANCE AND OF THE USED PANS MAY BE A DANGER, SO DURING FUNCTIONING AND DURING ALL THE TIME NECESSARY FOR THE COOOLING DOWN, TAKE CARE TO POSITION THE HOT PANS IN A WAY TO PREVENT BURNS OR OVERTURNING. AVOID LEAVING THE OVEN DOOR OPEN DURING FUNCTIONING OR IMMEDIATELY SOON AFTER THE SWITCHING OFF. AVOID TOUCHING THE HEATING ELEMENTS INSIDE THE OVEN AND GRILLS AS WELL.

RESTING OR SITTING ON THE OPEN OVEN DOOR, DRAWERS OR STORAGE COMPARTMENT CAN OVERTURN THE APPLIANCE, AND CONSEQUENTLY CAUSE HARM. THE DRAWERS HAVE A DYNAMIC CAPACITY OF 25 KG.

IF THE COOKER IS SET ON A PEDESTAL, APPROPRIATE MEASURES MUST BE TAKEN TO PREVENT IT FROM

SLIDING OFF THE PEDESTAL.

WHEN THE APPLIANCE IS DECOMMISSIONED, IT MUST BE DISPOSED OF IN A SUITABLE RECYCLING CENTRE. CUT OFF THE MAINS POWER CORD AFTER UNPLUGGING IT FROM THE WALL OUTLET, AND MAKE SAFE ANY COMPONENTS WHICH MIGHT BE DANGEROUS FOR CHILDREN (DOORS, ETC.).

THIS APPLIANCE IS MARKED ACCORDING TO THE EUROPEAN DIRECTIV E 2002/96/EC ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE). BY ENSURING THIS PRODUCT IS DISPOSED OF CORRECTLY, YOU WILL HELP PREVENT POTENTIAL NEGATIVE CONSEQUENCES FOR THE ENVIRONMENT AND HUMAN HEALTH, WHICH COULD OTHERWISE BE CAU SED BY INAPPROPRIATE WASTE HANDLING OF THIS PRODUCT.

THE SYMBOL

ON THE PRODUCT, OR ON THE DOCUMENTS ACCOMPANYING THE PRODUCT, INDICATES THAT THIS APPLIANCE MAY NOT BE TREATED AS HOUSEHOLD WASTE. INSTEAD IT SHALL BE HANDED OVER TO THE APPLICABLE COLLECTION POINT FOR THE RECYCLING OF ELECTRICAL AND ELECTRONIC EQUIPMENT. DISPOSAL MUST BE CARRIED OUT IN ACCORDANCE WITH LOCAL ENVIRONMENTAL REGULATIONS FOR WASTE DISPOSAL. FOR MORE DETAILED INFORMATION ABOUT TREATMENT, RECOVERY AND RECYCLING OF THIS PRODUCT, PLEASE CONTACT YOUR LOCAL CITY OFFICE, YOUR HOUSEHOLD WASTE DISPOSAL SERVICE OR THE SHOP WHERE YOU PURCHASED THE PRODUCT.

The manufacturer declines any responsibility for damage incurred by persons or objects that is caused by not following the above guidelines or by tampering with any part of the appliance or by using non-original spare parts.

Instructions for the installer

3. Installation

DIMENSIONS OF THE FREE-STANDING COOKING HOBS

DIMENSIONS OF THE COOKING HOBS

DIMENSIONS OF THE COOKERS

3.1 General warnings

It is the law that a competent person installs all gas appliances. In the UK Corgi gas installers are approved to work to safe and satisfactory standards. The cooker must be installed in accordance with BS 6172. Failure to install the cooker correctly could invalidate the warranty liability claims could and could lead to prosecution.

The manufacturer declines any responsibility for damage incurred by persons, animals or objects that is caused by not following the above guidelines (cfr. chapter “2. Warnings for safety and use”).

The technical data is indicated on the plate located on the back of the appliance. The adjustment conditions are shown on a label applied to the packing and the appliance.

Do not use the oven door handle for handling the appliance, or for removing the appliance from the packing.

Instructions for the installer

3.2 Fitting the front moulding

For the 70 cm model with double oven, a front moulding is included as standard supply to complete the aesthetic lines of the cooker.

Before turning the cooker over, we recommend removing all the parts that are not stably attached to it, in particular the cooking hob grids and burners. To lighten the weight of the cooker, the accessories inside the oven may also be removed, thereby preventing accidental damage during the overturning operation.

To assemble, proceed as follows:

x Tilt the cooker backwards. x Align the moulding A with the mounting position as shown in the illustration. x Apply the moulding until it fits into the mounting position. x Pull the moulding downward so that it hooks onto the 4 pins B (2 for each end) present on the

cooker.

3.3 Fitting the adjustable feet

The cooker is delivered with the feet removed. Before moving and hooking up the cooker, take the feet from the packing and screw them onto the cooker. This can be done in one of two ways:

A Lifting the cooker off the floor. B Laying the cooker on its back.

The final regulation of the feet to level the cooker to the floor will be done after the

gas and electric hook-ups have been made.

Should it be necessary to drag the cooker, screw the feet in completely and carry out the final regulation only when the other operations are completed.

Instructions for the installer

3.4 Electric connection

Make sure that the voltage and the size of the mains corresponds to the specifications shown on the plate located on the back of the appliance.

The plate must never be removed.

The plug at the end of the power supply cable and the wall socket must be the same type and must comply with current electric standards. Check that the mains is adequately earthed. Once the appliance has been installed make sure that the plug is accessible to allow the periodical che c k-up. The power supply cable should conform to BS6004.

Prepare an omni-polar cutoff device on the power supply line of the appliance with a contact opening distance equal to or more than 3 mm, located in a convenient position near the appliance.

Do not use reducers, adapters or shunts.

Before making the electric connection, make sure of the efficiency of the earthing.

Make sure that the relief valve and the home wiring system are able to withstand the appliance load.

The yellow/green earth cable must not be subject to cutoffs.

The electric cable must not come into contact with parts whose temperature is more than 50°C higher than room temperature.

The cooker should be installed in accordance with the latest edition of the IEE regulations.

3.4.1 Electric power cable section

According to the type of power supply, use a cable that conforms to the following table.

Running at 400V3N~ (models connected according to DIAGRAM "A"): use a pentapolar cable type H05RR-F/H05RN-F (cable

measuring 5 x 2.5 mm2).

Running at 230V3~ (models connected according to DIAGRAM "C" but commutated by the installer according to DIAGRAM "B"): use a tetrapolar cable type H05RR-F/H05RN-F (cable

measuring 4 x 4 mm2).

Running at 230V1N~ (models connected according to DIAGRAM "C"): up to 2.9 kW use a tripolar cable type H05RR-F/H05RN-F

(cable measuring 3 x 1.5 mm2); between 2.9 kW and 5.4 kW use a tripolar cable type H05RR-F/H05RN-F (cable measuring 3 x 2.5 mm2); between 5,4 kW and 7 kW use a tripolar cable type H05RRF/H05RN-F (cable measuring 3 x 4 mm2); over 7 kW use a tripolar cable type H05RR-F/H05RN-F (cable measuring 3 x 6 mm2).

The end to be connected to the appliance must have the earth wire (yellow-green) at least 20 mm longer.

The cable type H05RN-F is to be used for the models with fryer, while cable type H05RR-F for those without fryer.

Instructions for the installer

3.4.2 Type of power supply

It is possible to obtain different connections according to the voltage, simply by moving the unconnected cable ends on the terminal board as shown in the following diagrams. According to the model, consult the table "C

ONNECTION TO THE TERMINAL BOARD".

DIAGRAM CONNECTION TO THE TERMINAL BOARD

“A” MODEL POWER kW POWER SUPPLY

COOKING HOB 4 / 6 / 8 BURNERS 0,006 COOKING HOB 4 / 6 BURNERS + B / T / C 2,4 COOKING HOB 4 / 6 BURNERS + F 2,2 COOKING HOB 4 / 6 BURNERS + G 2,5 COOKING HOB 4 BURNERS + B / T + C 4,8 COOKING HOB 4 BURNERS + B / T + F 4,6 COOKING HOB 4 BURNERS + B / T + G 4,9

DIAGRAM “C”

VITROCERAMIC HOB (4 HEATING ELEMENTS) 7,6 VITROCERAMIC HOB (5 HEATING ELEMENTS) 9,8

DIAGRAM “A”

COOKER 4 BURNERS (1 OVEN) 2,2 COOKER 6 / 8 BURNERS (1 OVEN) 2,9 COOKER 4 / 6 BURNERS (1 OVEN) + B / T / C 5,3

“B”

COOKER 4 / 6 BURNERS (1 OVEN) + F 5,1 COOKER 4 / 6 BURNERS (1 OVEN) + G 5,4 COOKER 4 BURNERS (1 OVEN) + B / T + C 7,7 COOKER 4 BURNERS (1 OVEN) + B / T + F 7,5 COOKER 4 BURNERS (1 OVEN) + B / T + G 7,8

DIAGRAM “C”

COOKER VITROCERAMIC HOB (1 OVEN) (4 HEATING ELEMENTS) 9,8 COOKER VITROCERAMIC HOB (1 OVEN) (5 HEATING ELEMENTS) 12,7

DIAGRAM “A”

COOKER 6 BURNERS (2 OVENS) 3,9 COOKER 8 BURNERS (2 OVENS) 4,6 COOKER 4 BURNERS (2 OVENS) 4,7 COOKER 4 BURNERS (2 OVENS) + B / T / C 6,3 COOKER 4 BURNERS (2 OVENS) + F 6,1 COOKER 4 BURNERS (2 OVENS) + G 6,4 COOKER 6 BURNERS (2 OVENS) + B / T / C 7,0

“C”

COOKER 6 BURNERS (2 OVENS) + F 6,8 COOKER 6 BURNERS (2 OVENS) + G 7,1 COOKER 4 BURNERS (2 OVENS) + B / T + C 9,4 COOKER 4 BURNERS (2 OVENS) + B / T + F 9,2 COOKER 4 BURNERS (2 OVENS) + B / T + G 9,5

DIAGRAM “C”

COOKER VITROCERAMIC HOB (2 OVENS) (5 HEATING ELEMENTS) 13,7 COOKER VITROCERAMIC HOB (2 OVENS) (4 HEATING ELEMENTS) 12,3

DIAGRAM “A”

B = STEAK GRILL T = FRY-TOP C = VITROCERAMIC GRIDDLE F = DEEP FRYER G = GRILL

MODELS CONNECTED ACCORDING TO DIAGRAM "A" CAN BE COMMUTATED BY THE INSTALLER ACCORDING TO DIAGRAM "B". MODELS CONNECTED ACCORDING TO DIAGRAM "C" CAN BE COMMUTATED BY THE INSTALLER ACCORDING TO DIAGRAM "A".

Instructions for the installer

3.4.3 Replacing the electric cable

To replace the electric cable, it is necessary to access the terminal board. It is located on the back of the appliance, at the top left, as shown in the figure.

To replace the cable, proceed as follows:

x open the terminal board box; x unscrew the screw A that locks the cable; x loosen the screw contacts and replace the cable

with one of the same length that corresponds to the specifications in the table in section “3.4.1 Electric power cable section”;

x the "yellow-green" earth wire must be connected to

the terminal

and must be approximately 20 mm

longer than the line cables;

x the neutral "blue" wire must be connected to the

terminal marked with the letter N;

x the line wire must be connected to the terminal

marked with the letter L.

3.5 Power consumption of the vitroceramic hob

The vitroceramic hob has different power consumptions depending on the type of heating element used. The diagram shows the values of the power consumed. In the envisaged cases, the first numeric value refers to the total power, whereas the value that follows the symbol "/" refers to the inside diameter, with the exception of the central heating element, whose value that follows "/" refers to the outer diameter.

3.6 Power consumption of the volcanic rock grill

The volcanic rock grill has a consumption of 2500W. This appliance must therefore be installed where this power consumption can be ensured in total safety.

Instructions for the installer

3.7 Ventilation requirements

The room containing the appliances should have an air supply in accordance with B.S. 5440 part 2.

1. All rooms require an opening window or equivalent, and some rooms will require a permanent

vent as well.

2. For room volumes up to 5m³ an air vent of 100cm² is required.

3. If the room has a door that opens directly to the outside, and the room exceeds 1m³ no air

vent is required.

4. For room volumes between 5m³ and 10m³ an air vent of 50cm² is required.

5. If there are other fuel burning appliances in the same room B.S. 5440 part 2 should be

consulted to determine the air vent requirements.

6. The appliance must not be installed in a bed sitting room of less than 20m or in a bathroom or

shower room.

Windows and permanent vents should therefore not be blocked or removed without first consulting a Corgi gas installer.

Failure to install appliances correctly is dangerous and could lead to prosecution.

DO NOT install LPG version below ground level. This does not exclude installation into a room, which equates to a basement on one side of the building, but open to ground level on the opposite side.

3.8 Gas connection

Gas-powered devices for home use, which are not connected to a conduit for the evacuation of combustion products, must not cause a concentration of carbon monoxide that could pose a health risk to the persons exposed in relation to the time of exposure.

We recommend checking that the appliance is properly set up for the type of gas distributed. The threaded ½" gas connection pipe is located at the rear on the right hand side of the appliance.

The cooker is designed to match the depth of standard 600mm worktops. An adaptor back plate should, therefore, be fitted within the shaded area shown to allow the cooker to be pushed in fully and chased to the wall.

Connection to the cooker should be made with an approved appliance flexible connection to BS 669. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor.

The temperature rise of areas at the rear of the cooker that are likely to come in contact with the flexible hose do not exceed 70°C.

Instructions for the installer

3.9 Stability chain

The cooker is fitted with a stability device such as a proprietary stability chain as shown and firmly secured to the fabric of the building.

Whatever the position, remember to leave enough room for the cooker to be pulled out for cleaning and service.

The wall behind the cooker between the hotplate and 450mm above, and across the width of the cooker, must be an incombustible material such as ceramic wall tiles.

This appliance is designed not to project in front of standard 600mm worktops (excluding handles). To achieve the best fit the cooker must be pushed against the wall.

As this appliance is very heavy it should be situated on a suitably hard surface as to ensure servicing and installation is made possible with minimal impact on the floor surface.

Instructions for the installer

3.10 Gas regulations

If the cooking appliance is set up for a different type of gas than that available, its injectors must

be replaced, the minimum flow regulated. In order to replace the injectors in the cooking hob, it is necessary to carry out the following operations:

x remove the pan supports; x remove the burners and burner caps (Fig. A); x take out the injector (Fig. B) and replace it with one

suitable for the new type of gas (see "G

ENERAL

INJECTORS TABLE

");

x replace the gas label (on the rear of the appliance) with

the new one provided with the injectors kit;

x refit all parts by following the disassembly instructions in

reverse order and taking care to position the burner cap correctly on the burner.

3.10.1 Minimum flow of valved cooking hob taps

x Switch on the burner and turn the control knob

towards the minimum flow position

;

x remove the knob; x using a screwdriver, adjust the internal screw Z

until the correct low flame is obtained;

x refit the knob.

3.10.2 Minimum flow of non-valved cooking hob taps

x Switch on the burner and turn the control knob

towards the minimum flow position

;

x remove the knob; x insert a small screwdriver into the rod of the tap

and adjust the internal screw Z until the correct low flame is obtained;

x refit the knob.

x Unscrew the adjustment screw Z to increase the flow, or tighten it to reduce the flow. x The adjustment is correct when the low flame measures approximately 3 or 4 mm. x When changing quickly from maximum to minimum flow and vice versa make sure that the

flame does not go out.

GENERAL INJECTORS TABLE

POWER Watt CONSUMPTION

TYPE OF GAS mBar NOZZLE NO.

BURNERS

POSITION TYPE

MAX. MIN. MAX.

115 RAPID 3000 750 286 l/h

97 SEMI RAPID 1750 480 167 l/h 72 AUXILIARY 1000 330 95 l/h

128 TRIPLE-RING 3300 1300 314 l/h

NATURAL GAS 20

94 FISH KETTLE 1900 750 181 l/h 85 RAPID 3000 750 219 g/h 65 SEMI RAPID 1750 480 128 g/h 50 AUXILIARY 1000 330 73 g/h 93 TRIPLE-RING 3300 1300 241 g/h

LPG

BUTANE

PROPANE

30 28 37

68 FISH KETTLE 1900 750 138 g/h

3.11 Connecting to LPG

Use a pressure regulator and connect to the cylinder in compliance with the guidelines set out in standards regulations in force.

+ 33 hidden pages

Caple GR1201 Gastron Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual