Caple DD606SS, DD606BK Instruction Manual

Download

Page 1

Instruction manual for downdraft hood

Model code: DD606SS DD606BK

Contact Caple on 0117 938 7420 or for spare parts www.caple.co.uk

Page 2

Page 3

Il simbolo sul prodotto o sulla confezione indica che il prodotto non deve essere considerato come un normale rifiuto domestico, ma deve essere portato nel punto di raccolta appropriato per il riciclaggio di apparecchiature elettriche ed elettroniche. Provvedendo a smaltire questo prodotto in modo appropriato, si contribuisce a evitare potenziali con- seguenze negative per l’ambiente e per la salute, che potrebbero derivare da uno smaltimento inade- guato del prodotto. Per informazioni più dettagliate sul riciclaggio di questo prodotto, contattare l’ufficio comunale, il servizio locale di smaltimento rifiuti o il negozio in cui è stato acquistato il prodotto. Questo elettrodomestico è marcato conformemente alla Direttiva Europea 2002/96/CE sui rifiuti da apparec- chiature elettriche ed elettroniche (WEEE).

The symbol on the product or on its packaging indicates that this product may not be treated as house- hold waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent poten- tial negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. This appliance is marked according to the European directive 2002/96/EC on waste electrical and electronic equipment (WEEE).

Le symbole sur le produit ou son emballage indique que ce produit ne peut être traité comme déchet ménager. Il doit plutôt être remis au point de ramassage concerné, se chargeant du recyclage du matériel électrique et électronique. En vous assurant que ce produit est éliminé correctement, vous favorisez la prévention des conséquences négatives pour l’environnement et la santé humaine qui, sinon, seraient le résultat d’un traitement inapproprié des déchets de ce produit. Pour obtenir plus de détails sur le re- cyclage de ce produit, veuillez prendre contact avec le bureau municipal de votre région, votre service d’élimination des déchets ménagers ou le magasin où vous avez acheté le produit. Cet appareil est com- mercialisé en accord avec la directive européenne 2002/96/CE sur les dèchets del équipments èlectriques et èlctroniques (WEEE).

El símbolo en el producto o en su embalaje indica que este producto no se puede tratar como desper- dicios normales del hogar. Este producto debe llevarse al punto de recolección de equipos eléctricos y electrónicos para su reciclaje. Al asegurarse de que este producto se deseche correctamente, usted ayudará a evitar posibles consecuencias negativas para el ambiente y la salud pública, lo cual podría ocurrir si este producto no fuese manipulado de forma adecuada. Para obtener información más deta- llada sobre el reciclaje de este producto, póngase en contacto con la administración de su ciudad, con su servicio de desechos del hogar o con la tienda donde compró el producto. Este electrodoméstico está marcado conforme a la directiva Europea 2000/96/CE sobre los residuos de aparatos eléctricos y electrónicos (WEEE).

Das Symbol auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall zu behandeln ist, sondern an einem Sammelpunkt für das Recycling von elektrischen und elektronischen Geräten abgegeben werden muss. Durch Ihren Beitrag zum korrekten Entsorgen dieses Produkts schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Umwelt und Gesundheit werden durch falsches Entsorgen gefährdet. Weitere Informationen über das Recycling dieses Produkts erhalten Sie von Ihrem Rathaus, Ihrer Müllabfuhr oder dem Geschäft, in dem Sie das Produkt gekauft haben. Dieses Elektrohaushaltsgerät ist entsprechend der EU-Richtlinie 2002/96/CE Über Elektro- und Elektronik – Altgeräte (WEEE).

Het symbool op het product of op de verpakking wijst erop dat dit product niet als huishoudafval mag worden behandeld. Het moet echter naar een plaats worden gebracht waar elektrische en elektronische apparatuur wordt gerecycled. Als u ervoor zorgt dat dit product op de correcte manier wordt verwijderd, voorkomt u mogelijk voor mens en milieu negatieve gevolgen die zich zouden kunnen voordoen in geval van verkeerde afvalbehandeling. Voor meer details in verband met het recyclen van dit product, neemt u het best contact op met de gemeentelijke instanties, het bedrijf of de dienst belast met de verwijdering van huishoudafval of de winkel waar u het product hebt gekocht. Dit apparrat voldoet aan de Europese richtlijnen 2002/96/CE voor elektrische en elektronische afval (WEEE).

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent

potential negative consequences for the environment and human health, which could otherwise be

caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where

ou purchased the product. This appliance is marked according to the European directive on waste

electrical and electronic equipment (WEEE).

CE Declarations of Conformity

This appliance has been manufactured to the strictest standards and complies with all applicable legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility Directive (EMC).

Environmental protection

Page 4

Page 5

NOTE

This downdraft extractor is designed to work in both recirculation mode and ducted with outside evacuation.

SAFTEY INSTRUCTIONS

These hoods have been designed for personal use in the home. The appliance must be used by adults. Make sure that the appliance is out of reach of children and that they do not use it to play with. Make sure that children do not operate the controls.

- When the appliance is delivered, check the overall appearance of the packaging. Any remarks should be written on the delivery note, of which you keep a copy. Your appliance is designed for normal domestic use. It is not designed for commercial or industrial use, or for purposes other than those for which it was designed.

- Any consequesnces of or damage from incorrect installation or incorrect use of the appliance will not be covered by the manufacturer’s guarantee.

- Do not ever change or try to change the characteristics of this appliance. This would be a danger. Repairs must be performed only by an authorised Caple technician.

Always disconnect the hood before carrying

out cleaning or maintenance operations.

- Adequately ventilate the room when a cooker hood and other appliances, powered by energy other than electricity, are used simultaneously, so that the hood does not suck any combustion fumes.

- Do not cook food over open flames (flambé) or operate gas hobs without pots or pans on them

while using this extractor (the flames could be sucked into the hood may damage the

appliance).

- Frying while using this extractor must be done inder constant supervision as hot oils and fats

may ignite. Respect the guidelines for cleaning and replacement of grease filters. Accumulated deposits of grease are a fire hazard.

- This appiance must not be used with cooktops powered by wood or coal or in any case, over cook tops with power levels that could damage the appliance.

- Never use steam or high-pressure devices for cleaning your hood (regulations regarding electrical safety). .

Constantly seeking to improve our products, we reserve the right to modify their technical, functional, or aesthetic characteristics deriving from their upgrading. In the case of the version with external motors, for normal downdraft operation, it is necessary to use a external motor made by Caple. The air collected must not be conveyed into a flue used for smoke or fumes from appliances powered by anything other than electricity (e.g. central heating systems, etc.). As far as discharging exhaust air is concerned, please follow the guidelines given by competent authorities.

WARNING

Keep these instructions for use with the Extractor. If the appliance should be sold or passed on to others, make sure that the instructions are passed on with it. We thank you for taking note of these suggestions before installing and using the appliance. They have been written for your personal safety and the safety of others.

- Never use the extractor without the grease filters fitted.

- The minimum distance between the Downdraft extractor (closed) and the surface above must be at least 400mm

- When handling the Downdraft, never put your hands in the field of action of the extractable unit. Do not touch any moving parts.

- There must be a minimum space of 50mm between the edge of a gas hob and the downdraft frame.

Page 6

Contents

Dimensions 7

Installing the extractor 8

Removing the grease filters and installing the charcoal filters 9

Electrical connection 10

How the downdraft extractor works 11

Cleaning the extractor 13

Troubleshooting 14

Aftersales service 14

Images (fig.1 to Fig.13) 15

Page 7

Dimensions

INC

Note: The Downdraft worktop cutout can be connected to the hob cutout, but only for electric hobs.

For gas hobs, a minimum 50mm gap must be left beetween the edge of the gas hob and the downdraft frame

Page 8

Installing the extractor

Before carrying out the appliance installation, please check that all components are not damaged, in such a case contact your retailer and do not continue with the installation operation. Before the installation of the Downdraft, please remove the safety piece you can see in the picture (Fig. 1). Furthermore, please read carefully all of the following installation instructions.

The manufacturer shall not be deemed responsible for air capacity or noise problems caused by failure to comply with the above instructions and no warranty on the product shall be provided.

Before making the hole, check that there are no structural or other parts inside the cabinet where the appliance is to be placed, which could hinder the correct installation. Check that the dimensions of the Downdraft and the ones of the hob are compatible with the cabinet so that the installation can be carried out properly.

Make a rectangular opening in the back part of the cook top (842x100mm for the 90 cm model and 542x100mm for the 60 cm model). If the DDMEXT10 is already installed, remove the screws and the motort in order to insert the downdraft in the hole made.

Put the Downdraft in the opening, inserting it from above as shown in (Fig. 2).

Fix the downdraft inside the cabinet, using the special fixing brackets supplied with the product (Fig. 3). Insert the brackets in the lower side of the downdraft (Fig. 3), in such a way that there is a 2 mm distance between the lower side of bracket and the bottom of the cabinet (Fig. 3). This distance will allow the traction to be positioned downwards of the product, at the moment of fixing, in order to have the stainless steel trim perfectly adhering with the work surface. Before inserting the screws, please make sure that the appliance is perfectly perpendicular with the work surface.

Once the installation is complete and after connecting the appliance to the mains power, lift up the downdraft and remove the door block (Fig. 4); then open the door (Fig. 5) and fit the filters in place (Fig. 6). In the version of the Downdraft using the the DDMEXT10, install the power unit orienting the air outlet to the desired position, either downwards or upwards (Fig. 7). The motor can be installed either on the front or rear side of the downdraft. After having installed the motor, then connect the air ducts.

For versions using an external motor, place the external motor in a suitable area and fit the exhaust air flue as illustrated. Then fit the air outlet ducts between the external motor and the downdraft. Select an air outlet from the five possibilities (Fig. 8) and fit the union supplied with the appliance.

Place the metal box containing the wiring in an easily accessible area to allow maintenance interventions where necessary (Fig.9). Connect the connectors (9-pole connector) to control the actuator and safety control and button pad connector) (Fig. 10).

- Use an air exhausting pipe/ducting not exceeding a maximum lenght of 5 meters

- Do not use flexible ducting

- Limit the number of elbows in the piping, as each elbow reduces the air capacity of 1 linear meter. (for example, if you use 2 90 degree elbows, the length of the piping should not exceed 3 metres.

- Avoid abrupt direction changes

- Use a 150mm constant diameter ducting pipe for the whole length (or equal surface area.

- Only use ducting approved by the standards in force.

Page 9

WARNING

Before connecting the air exhaust hose, make sure that the motor non-return valves can rotate freely.

CAUTION

The installation must comply with the r

egulations in force regarding the

entilation of enclosed environments. In

articular, discharged air must not be

onveyed into a duct used for fumes

ischarge or discharge from appliances using

as or other combustible materials. The use

f discontinued ducts is not allowed without

he approval of a qualified technician.

WARNING

After having replaced the filters, reinstall the front stainless steel panel, otherwise the Downdraft is not enabled to function.

Extraction options

This appliance is intended to suck cooking fumes, greases and small amounts of steam. It has been designed to work in both a ducted mode with outside evacuation and recirculating mode (using charcoal filters).

Ducted - Outside discharge version

The cooker hood can be mounted in the version with outside discharge for extracted air: in this case it is necessary to connect the ducting/ exhausting channel to the outside (exhausting pipes are not supplied with the products.)

Unblock the motor non-return valve if required.

In case of outside air discharge installation, fit a non-return valve to prevent wind and back air from entering.

ecirulaton mode In case fumes and vapour cannot be evacuated outside, the appliance can also be used in recircualtion mode. Activated charcoal filters are required for this type of installation (the DD605 requires CAP27CF and the DD905 required CAP43CF) Air recycled through the charcoal filters is recirculated into the kitchen, thanks to a duct conveying the air on one side of the cabinet (Fig.11)

Removing the grease filters and installing the charcoal filters

The removal and fitting of the grease and charcoal filters need to be carried out with the downdraft in the open position. To open the downdraft, push the '1' key. Then remove the front panel,

pushing the upper part of each side at the same time. The panel will drop forwards to make it possible to access the grease filters (Fig. 6). Remove the grease filters to access the carbon filters (Fig. 12). The replacement of the charcoal filters has to be carried out accordingly to the effective use of the Downdraft, and in any case they should be replaced at least once every 6 months.

Connect the internal or external motor cable to the terminal board found inside the plastic box on the downdraft wiring. When performing the electrical connection, take care to respect the colours of the electrical wires and connect it correctly (Fig 14).

Page 10

Electrical connection

If the appliance has no plug or if the plug is not easily accessible, then a device needs to be fitted to cut it off from the electric network; this device must have an opening distance between contacts on all poles of at least 3 mm.

Electrical connection

While installing the appliance and carrying out maintenance operation, make sure it is disconnected from the electrical network or the fuses are cut out or removed. Check that:

 t The power is enough  t The feeder lines (mains) are in good condition.  t 5IFDBCMFTEJBNFUFSDPNQMJFTXJUIJOTUBMlation

regulations

WARNING

Place the metal box containing the electronic components at a distance of no less than 65cm from gas operated hobs or in any case, 65cm from the suctioning surface of the cookerhood.

NOTE

We recommend installing the metal box containing the electronic components at least 10cm above floor level and at a suitable distance from all heat sources (e.g. oven sides or hob).

CAUTION

This appliance is fitted with an H05 VVF 3 conductor, 0.75 mm2 (neutral, phase, and ground) power cord. This can be connected up to a 220 - 240 V monophase electrical network through a CEI 60083 approved power socket, which must remain accessible after installation, in compliance with installation regulations. We decline any responsibility in case of accidents caused by a lack of ground connection or incorrect ground connection. The appliance must be fed through a differential protection device (RCD), with a nominal residual current not exceeding 30mA. If the power cord is damaged, call the Caple after-sales service to avoid any risk.

WARNING

The downdraft connection to the electrical network must be carried out only by professional and qualified technicians. The downdraft must be connected to a properly installed and suitable electrical network. The electrical system must comply with VDE0100 standard.

DANGER

If the cooker hood presents any

anomaly, disconnect the appliance or

remove the fuse corresponding to the

appliance power disconnecting line.

Page 11

A: Lower the extraction panel - '0' switch

This serves to close the extraction panel either completely or in intermediate positions above 180 mm from the hob. When the extraction panel is being closed, it will remain in operation until it reaches 180 mm above the hob. Below this height, the extraction function will switch off automatically.

B: Raise the extraction panel, switch on - Speed 1

This serves to bring the extraction panel up to a maximum height of 300 mm and to automatically set the first extraction speed when the panel reaches a height of 180 mm. Pressing the button when this height is reached makes it possible to place the extraction panel in the required intermediate positions, up to a maximum of 300 mm, while leaving the extraction speed of the motor unchanged.

C: Speed 2 switch

D: Speed 3 switch

E: Speed 4 switch

These serve to set the respective suction speeds after the extraction panel has reached 180 mm above the hob and to set the height of the extraction panel to a maximum of 300mm by pressing the same button.

Timer

10 minutes after pressing this button and setting the function, it serves to stop the extractor motor and close the carriage. The set function is signalled by the flashing LEDs “D” for the set speed. The timer can be

cancelled by press-ing the key again.

Other functions:

Automatic turn off:

After 4 hours of continuous use from the last function selected, the appliance turns off and closes automatically.

Grease filters saturation:

After 30 hours of working, the speed indicators “D” will all flash simultaneously, signaling the grease filters saturation. To reset this alarm, hold down the “TIMER” button for at least 3 seconds, while the carriage is open.

Downdraft calibration:

Calibration of the downdraft after having installed it, it is necessary to start the calibration procedure, which is aimed at adjusting the extraction strength of the filtering unit. Connect the product to the

power supply, making sure that it is conformed to the supply voltage indicated on the technical data label.

Push the 1 button and the aspiration panel rises. After it has reached a height of 180mm from the gob, press 0, to stop the extraction then the 'Timer' and after 2 sec. the 0 button. The downdraft will carry out the calibration of its aspiration panel rising and retracting for some centimeters. During this phase, the buttons on the push button control panel flash. At the end of the calibration, the aspiration panel return to the previous position and the buttons stop flashing. Wait until the aspiration panel stops moving before re-activating the extraction.

How the downdraft extractor works

WARNING

This operation has to be carried out by a specialised technician.

Page 12

Safety system:

If there is an obstacle present while the extractable unit is closing, the Downdraft stops closing and rises again thanks to a security system to prevent harm.

TIMING As a result of the new EU65 “Energy label” and EU66 “ Ecodesign” regulations issued by the European Commission, which came into force as from January 1st, 2015 , our products have been adapted to comply with these new requirements. All of the models complying with the energy label requirements, are equipped with new electronics including a timer device for suction speeds control, when the air capacity exceeds 650m³/h. Internal motor models, with maximum air capacity higher than 650m³/h, are equipped with a timer device that automatically switches the suction speed from 4th to 3rd speed, after 6 minutes operation. External motor models are equipped with remote motors that , as for internal motor versions, include a timer device that switches down the suction speed when it exceeds 650 m³/h. (See External Motors Instructions ) Remote motors, whose air capacity exceeds 650m³/h at both 4th and 3rd speed , will have the following by default timer control functions: The suction speed is automatically switched from 4th to 2nd speed, after 6 minutes operation. If the appliance is working at 3rd speed, it is automatically switched to 2nd speed after 7 minutes operation. Operation speeds can also be changed during operation. The energy consumption of the appliance in stand – by mode is lower than 0.5W.

Page 13

Careful maintenance helps to ensure the correct operation and good performance over time.

MAINTENANCE HOW TO PROCEED?

ADDITIONAL PRODUCTS TO

USE

External surfaces and

accessories

Do not use metallic scrubbers, abrasive products or hard brushes.

To clean the external surfaces of the cooker hood and the light housing screen use only commercially available household detergents diluted in water. Then rinse with clean water and dry with a soft cloth.

Grease filter with

extractable unit open

After 30 hours of operation, the downdraft will signal the grease filter saturation. The saturation is signaled by the blinking of the 4 central leds.To reset, hold down the timer button

for at least 3 seconds, while the

carriage is open.

The grease filters can be washed by hand or in the dishwasher. These filters need to be cleaned on a regular basis, because otherwise they may represent a fire risk. Refit the grease filters and front panel, making sure that the panel is properly fitted at the sides, otherwise it may cause the downdraft to stop operating.

Active charcoal filter

In the recirculation mode, the active charcoal filter must be replaced periodically. To remove the charcoal filter first of all it is necessary to remove the grease filter and then pull the plastic key of the panel itself, in order to disengage it from its seating. Follow these steps in reverse order to insert the active charcoal filter. Replace the used charcoal filter on an average of every six months.

Cleaning the extractor

CAUTION

The hood must be disconnected from the electrical network, both by unplugging the appliance from the socket and activating the magnetic circuit breaker (safety cut-out), before removing the metal grease filters. After cleaning, replace the metal grease filters as outlined in the installation instructions.

Page 14

PROBLEM SOLUTION

The extractor

does not work

Check that:

t 5IFSFJTOPUBQPXFSPVUBHF t "TQFDJGJDTQFFEIBTBDUVBMMZCFFOTFMFDUFE t 5IFQPMFDPOOFDUJPOJTJOTFSUFEQSPQFSMZ t 5IFSFESFTFULFZGPVOEPWFSUIFFMFDUSJDBMTZTUFNCPYJTQVTIFE t .BLFTVSFUIBUUIFXJSFTPGUIFQPMFDPOOFDUJPOBSFJOTFSUFEQSPQ-

erly in the connector itself (during the connection phase, an excessive pressure could bend the contacts).

The extractor has

poor performance

Check that:

t 5IFNPUPSTQFFETFMFDUFEJTTVGGJDJFOUGPSUIFRVBOUJUZPGGVNFTBOE

vapors present in the room.

t 5IFLJUDIFOJTWFOUJMBUFEXFMMFOPVHIUPBMMPXBJSGPSJOUBLF t 5IFDIBSDPBMGJMUFSJTOPUXPSOPVU GJMUFSJOHWFSTJPODPPLFSIPPE t 5IFBJSPVUMFUDIBOOFMJTGSFFBOEDPNQMJBOUXJUIQBSBHSBQIOP t 5IFOPOSFUVSOWBMWFTPGUIFmotorVOJUBSFGSFFUPSPUBUF

The extractor stops in

the middle of

operation.

Check that:

t 5IFSFJTOPUBQPXFSPVUBHF t 5IFPNOJQPMBSEFWJDFIBTOPUUSJQQFE

Troubleshooting

Aftersales service

NOTE

When contacting Caple Service, please provide the appliance details shown on the appliance labels (Type Fig.13-A and equipment Fig.1-B and also the production date Fig.13-C). This information is stated on the rating label and the production date is placed on the lower side of the downdraft.

Any service or repairs should be carrier out by a qualified person, please contact Caple Service either by telephone 0117 938 7420 or by email service@caple.co.uk

Page 15