Caple C195 53 User Manual

C195/53 Integrated

Fridge Freezer

INSTRUCTIONS FOR

USE

Caple Quality Products

Consumer Help Line 0870 2411142

Thank you for purchasing this Caple appliance which, if these instructions are followed, will
give you many years trouble free service.

Please keep these instructions for use close at hand and available to anyone
other than yourself who may use the appliance. By following all the
recommendations made in the instructions you will be able to make the best
possible use of your new appliance's facilities.

Should you have any queries on this product, please call our Customer Service
desk on: 0870 2411142

Please be ready to supply details of your appliance. We will need to know the
Model Number and Serial number. You will find these details on the data badge
which is attached to the inside cabinet.

GUARANTEE

This appliance is guaranteed for a period of 12 months against faulty materials. In the
unlikely even of a service engineer being required please call our help desk on 0870

2411142. You will need to provide the engineer with a copy of the invoice to

confirm date of purchase. Without this information work will be on a chargeable basis.

This appliance is designed for domestic use only. Use for any other purpose will
invalidate any warranty claim.

The manufacturer declines all liability for any direct or indirect damage if these regulations
are not complied with.

SAFETY WARNINGS

Read them attentively, before installing and using the appliance.

• Always keep the instruction handbook. Should the appliance be sold, pass it on to its
new owner.

• The appliance must be used only for household cool storage and/or freezing of foods.

• Packaging materials, such as plastic bags, polystyrene and plastic clasps, must not be

kept within children's reach, as they are potential sources of danger.

• Do not let children play with the appliance e.g. by sitting in the drawers, rocking or
clinging onto the door. The refrigerator might overturn, or some objects placed on top
might fall.

• Do not use the plinth, drawers, and doors, wire shelves as a footboard or support.

• Take care not to damage the pipes of the cooling circuit while placing, installing and

cleaning the appliance.

• Make sure that no electric appliances or components are installed near the vents. (E.g.
fans, switches, power sockets etc.)

• After installing the appliance make sure that it does not stand on the power cable.

• We suggest you do not use extension leads or multiple plugs to plug the refrigerator to

the mains (line).

• Before commencing any cleaning and maintenance jobs, unplug the appliance or switch
off the main power switch of the local power system.

• To unplug the appliance from the mains power supply, remove the plug. without pulling
its power cable.

• Do not place liquids in glass containers in the deep-freeze compartment because they
might explode.

• Prevent all fires or sparks inside the appliance.

• Do not consume foodstuffs when their maximum storage date has expired, as they might

cause food poisoning.

• Do not block the vent slits or grilles required in the appliance or in the enclosing cabinet.

• While defrosting never use metal objects to speed the defrost process. Failure to heed

this warning might lead to irreparable damage to the refrigerating circuit.

• Do not use electric appliances (such as ice cream machines, deodorizers etc) inside the
appliance.

• All maintenance, including replacing the power cable, must be carried out by the
technical support service. Otherwise the user might cause serious hazards.

• This appliance is designed to food-grade standards and conforms with European directive
89/109/EU. This appliance has been developed, manufactured and marketed in
compliance with: Low voltage directive 73/23/EU Directive EMC 89/336/EU Marking
directive CE 93/68/EU. Energy efficiency directive 96/57/EU

ENVIRONMENTAL INFORMATION

• This appliance has been designed and manufactured to optimize environmental
protection measures.

• To ensure the same environmental friendliness when the appliance is dismantled, as it
contains some pollutants or flammable materials such as the compressor lubricating oil,
we suggest that you never dispose of the appliance haphazardly and contact local
authorised pickup and disposal specialist.

• Do not throw the packaging of your appliance straight into the bin, sort the various
materials (e.g. polystyrene, cardboard, plastic bags) according to local waste disposal
guidelines and effective regulations.

• This appliance is CFC-free (the refrigerating circuit contains R134a) or HFC-free (the
refrigerating circuit contains R600a ISOBUTANE). To check the gases used refer to the
specification plate on the appliance.

• For appliances with ISOBUTANE (R600a) ISO-butane is an environmentally friendly but
flammable natural gas. Therefore, it is important to ensure that the refrigerating circuit
tubes are not damaged, before connecting the appliance to the mains power supply.

INSTALLATION

Two workers, so as not to injure people or damage things, should install the appliance.

If damage occurs while the appliance is being dispatched, advise the supplier immediately
before connecting it.

Read the climatic class of the appliance on the specification plate located on the inner left
side: -

• If: iSNi (works at ambient temperatures ranging ) from +10°C to +32°C

• If: iNi (works at ambient temperatures ranging) from +16°C to +32°C

• If: iSTi (works at ambient temperatures ranging) from +18°C to +38°C

• If: iTi (works at ambient temperatures ranging) from +18°C to +43°C.

Install the appliance in a dry and well-aired place, away from heat sources, such as
radiators, stoves, cookers, sunrays etc.

The appliance must be installed on stable and flat surface, by adjusting the feet, if any.

A gap of at least 20mm and 100mm must be left between the rear of the appliance and the
wall towards any wall-mounted units above the appliance.

Do not place on the refrigerator/freezer any heat-emitting appliances such as: microwave
ovens, toasters etc.

Should the refrigerator be enclosed, in the kitchen cabinet make sure airing gap A is at least
200 cm3, and the venting duct on the rear of the cabinet is at least 50mm deep, follow the
instructions in the figures about installation.

Make sure that no appliances or electric components are installed near the vents

CAUTION

Easy access must be provided to the appliance power socket so that it can be
unplugged if necessary. If this cannot be done, connect the appliance to the
mains (line) via a two-way switch with an opening contact of at least 3 mm,
located in an accessible place.

ELECTRICAL CONNECTION

The appliance must be by law, plugged into a socket fitted with an earth
(ground) contact. Therefore the appliance is supplied with an earthed plug that
must be plugged into a compatible socket. The manufacturer declines all
responsibility for any injuries or damage caused by the non-compliance with this
regulation.

Check the voltage shown on the specification plate located on the inner left side of the unit,
and make sure that it matches the mains voltage.

How to replace the internal lamp bulb:

Remove the power plug or switch off the main power switch of the local electric system
before replacing the bulb. Use only bulbs with a power equal to the value given on the bulb
guard (e.g. max 15W).

GETTING TO KNOW THE APPLIANCE.

The refrigerator you have purchased, with model variations, is designed to store fresh foods
and, if supplied with a Deepfreeze compartment it can store frozen foods and freeze fresh
foods (see paragraph on freezing).

Temperature control.

The thermostat lets you regulate the temperature gradually.

• Setting 0 means appliance off.

• Setting 1 means minimum operation.

• Setting 7 means maximum operation.

Remember that thermostat regulations are sensitive to variations owing to the ambient
temperature, amount of stored food, location and how often the doors are opened.

By experience you will learn the best regulation for your needs.

The space inside the refrigerator can be organized varyingly by moving the wire shelves and
solid shelves to suit your requirements. To move the shelves, lift the rear, pull them
forwards until the front slides out of the runners, turn them down and pull them out fully,
select the required position and insert the shelf by repeating the above steps in reverse
order.