CAPKOLD INA-3-100SA User Manual

CapKold Cook-Chill Production Systems

Cook-Chill Kettle with
Non Tilt-Out Inclined Agitator

r INA/3-50SA [50 Gal.]
r INA/3-100SA [100 Gal.]
r INA/3-150SA [150 Gal.]
r INA/3-200SA [200 Gal.]
r INA/3-300SA [300 Gal.]

General Description:

CapKold Model INA/3-___SA (specify capacity) hemispheric bottom
steam jacketed kettle, 2/3 jacket, with patented inclined agitator, to
ensure gentle yet thorough mixing of a broad range of products and
enhanced suspension of ingredient solids during product transfer. 100
PSI maximum operating jacket pressure, 3” air operated drop down
product discharge valve and variable speed agitator drive standard.

Kettles

Kettle Construction:

• Hemispherical bottom jacket is designed for up to 100 PSI

working pressure and built to ASME code and National Board
registered. Kettle will operate dependably at any steam pressure
between 15 PSI and 100 PSI

• Capacities are working output gallons

• Spiral baffle within jacket for more efficient circulation of

cooling water

• Type 316 stainless steel inner hemisphere and all wetted parts.
Type 304 elsewhere

• Interior and exterior of kettle finished to a No. 4 Sanitary Finish

• 3” air operated, drop down, stainless steel, product transfer valve

mounted flush to kettle bottom

• Stainless steel legs with adjustable stainless steel floor

mounting flanges

• 3/4” swing spout faucet mounted at kettle rim

• Manufactured to latest sanitary standards and HACCP compliant

• NSF listed

Agitator Design:

• Inclined, easily removable agitator and breaker bar, with

removable nylon edge scraping blades which scrape entire heat
exchange surface

• Variable speed gear motor drive with 7-36 rpm

operating range

• Heavy duty T.E.F.C. motor

Control Systems:

• Flush mounted temperature sensor

• Emergency stop switch mounted near kettle rim

• Vacuum breaker and safety valve supplied and factory mounted

• Kettle-mounted control valve box pre-piped for single point

utility connections

Options:

r Agitator located ±45°, ±90° of rear centerline
r Pinned agitator for heavy, viscous products
r Remote control valve boxes
r 3” manual ball valve with 90º elbow
r Prison package

Accessories:

r 2 piece hinged cover (1/3 solid, 2/3 open grate)
r 2 piece solid cover

Note:

• Recommend 50-75 PSI (min) steam for rapid cooking

• Larger sizes (Consult factory for specifications)

• Single or dual kettle control panel required to operate

(See Spec CKCP)

1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net

Please reference our website for the most
updated product information and specifications.

Groen CapKold Kettles, Page 2

CKINA3 160399A

Revised 08/06

CKINA3 Kettle W/Non Tilt-Out Inclined Agitator & Pre-Piped Valve Box

160400 REV A

TEMPERATURE

SENSOR

-90˚ +45˚ +90˚

D

3” AIR
OPERATED DROP
DOWN VALVE

-45˚
OPTIONAL AGITATOR

AND DRIVE ORIENTATIONS

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.