Capital ACG52RBI1N Specifications Sheet

ACG52RBI.1 N/L
52” Built In Open Grill BBQ with Solid Flat Plate
Features and Benets:
Warranty 2 Years
Quality Handcrafted Stainless Steel Product
Flame Failure with Auto Re-Ignition
30Mj Infrared Zone Burner
Thermostat in hood Hood-mounted thermostat allows for accurate temperature reading
Stainless Steel Solid Plate (10mm Thick) Stainless Steel teppanyaki grill plate included as standard.
Integrated Halogen Lighting System
2 x 18Mj Flush Mounted Rotisserie Burner
Electronic Ignition Designed for reliable ignition of ame.
Standard Accessories Included
304 grade stainless steel encased ceramic rods and channelled grates for grease drainage.
Stainless steel W-shaped precision burners with ame failure and
auto re-ignition.
Flame failure with auto re-ignition if ame goes out. This is designed for the
highest levels of safety and performance.
High power infrared zone burner providing fast heat up and reducing cooking times.
3 powerful integrated halogen lights strategically located to ensure the best lighting whilst cooking.
Flush mounted infrared rotisserie motor for clean look with a high capacity concealed motor and 2 rotisserie forks provided.
Included with the purchase of a Capital BBQ is a vinyl cover, chopping board, and teppanyaki grill plate valued at $1,248
Lift Assist Stainless Steel Hood Spring assisted lid to provide smooth and easy use of hood.
Amperage Requirement 10 AMP GPO Required
Gas Type Choice of Natural or ULPG
Handcrafted with Precision in California, U.S.A.
40-44 Mark Anthony Drive, Dandenong South VIC 3175 Phone: 1300 762 219 Fax: 03 9706 6904 Website: www.arisit.com
Units are designed and manufactured in California, U.S.A. by dedicated boutique specialist manufacturer.
Distributed by Arisit Pty Ltd
ACG52RBI.1 N/L
A
B
C
D
E
222
ACG40RBI
ACG52RBI
584mm (closed lid)
700mm (open lid)
(both models)
732mm (closed lid)
770mm (open lid)
102mm
min.
732mm (closed lid)
770mm (open lid)
85mm
85mm
1283mm
1303mm
998mm
978mm
629mm
min. 20mm
629mm
508mm
508mm
400mm
551mm
238mm
CCE3DRWSS
CCE2DRWSS
CCE1DRWSS
PSQ40ADS
PSQ30ADS
min. 20mm
10mm overhang
from bench
52” Built In Open Grill BBQ with Solid Flat Plate
* Floor base 272mm min. from bottom of benchtop. A minimum 50mm clearance is required directly below the barbecue.
Model ACG52RBI.1 N/L
Control Panel Die-Cast Chrome Plated; Black Trim & S/S Bevel
Gas Type Available in Both Natural Gas & ULPG (must be ordered to suit gas)
Total Mj Consumption
LPG Gas Bottle Requirement Minimum 4.5kg, Maximum 9kg Gas Bottle
Standard Accessories Included Birchwood Chopping Board & Vinyl Cover
Gas Hose for Natural Gas 1/2 Gas Pipe Line to be Used
Flame Failure YES
Auto Re-Ignition YES
Product Dimensions (W) 1321mm x (D) 732mm x (H) 584mm
Cut Out Product Dimensions (W) 1283mm (back) / 1303mm (front) x (D) 629mm x (H) 250mm
WARNING: Technical specications and product sizes can be varied by the manufacturer, without notice. Cut outs for appliances should only be physical product measurements. The above information is indicative only.
40-44 Mark Anthony Drive, Dandenong South VIC 3175 Phone: 1300 762 219 Fax: 03 9706 6904 Website: www.arisit.com
135.6 Mj/hr (NG)
150.0 Mj/hr (ULPG)
Distributed by Arisit Pty Ltd
Loading...
+ 1 hidden pages