COFFEE TABLE
PRODUCT NO. TWS32NB
MODEL N0. 088-0768-6
ASSEMBLY INSTRUCTIONS
Toll-free: 1-877-539-7436
IMPORTANT: Read this manual carefully before beginning assembly of this product.
Keep this manual for future reference.
2
IMPORTANT: Retain for future reference and read carefully.
1 A
2 B
C
TABLE TOP - 1
LEG - 4
SCREW ST4.2*16 - 4
WASHER d6.5*D13*1.0 - 8
D
BOLT CAP - 8
E
HEX KEY WRENCH 4 MM - 1
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
!
!
!
!
Parts List 2
Assembly 3
TABLE OF CONTENTSPARTS LIST
BOLT M6*16 - 8
3
BASE ASSEMBLY - 1
4
CENTRE CONNECTOR - 1
3
MODEL NO. 088-0768-6
Attention:
Make sure that each bolt needed for all steps matches the corresponding figure to ensure
proper assembly.
Step 1:
Requires: 2, 3, and A
Place the base assembly (3) onto a non-abrasive surface, such as a carpet, with its leg tabs
facing upwards. Insert the tabs on the base assembly (3) into the legs (2). Fasten them
together by using screws (A).
ASSEMBLY
2
2
2
2
2
3
2
2
3
2
2
1
A
A
Step 2:
Requires: 1, 2, B, C, D, and E
Place the table top (1) onto a non-abrasive surface, such as a carpet, with its underside
facing upwards. Fasten the legs (2) to the underside of the table top (1) rim by using
bolts (B) and washers (C). Fully tighten with hex key (E).
B
B
D
D
EC
C
2
2
2
Step 3:
Requires: 2, 4, B, C, D, and E
Fasten the centre connector (4) to the middle of the legs (2) by using bolts (B) and washers (C).
Fully tighten with hex key (E). Make sure that all of the bolts have been tightened completely
and cover them with bolt caps (D).
B
C
Step 4:
Turn the table to its upright position.
MODEL NO. 088-0768-6
Cleaning and Maintenance
• Wash with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance
and safety of your table.
• In order to prolong the life and beauty of your table, we recommend that it be stored in a dry and
protected area during off-season periods.
4
ASSEMBLY
2
4
B D
D
EC
Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
Loading...