POE-SW24P-2G-440
24-ports 100Mbps Unmanaged PoE Switch
Overview
POE-SW24P-2G-440 is an 24 10/100Mbps ports unmanaged switch that requires no configuration
and provides 24 PoE (Power over Ethernet) ports. It can automatically detect and supply power
with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is
transmitted along with data in one single cable allowing you to expand your network to where
there are no power lines or outlets, where you wish to fix devices such as IP Cameras or IP
Phones, etc.
Features
IEEE 802.3at and IEEE 802.3af Power
over Ethernet (PoE) compliant
24x10/100Mbps Auto-MDIX PoE ports
Provides up to 30 watts per PoE port
PoE power budget 370W
4 KV surge protection for PoE ports
IEEE 802.3x flow control support
Plug-and-play installation
8.8 Gbps swit
2.75 Mbits RAM Data Buffer
4K MAC address entries
Sturdy metal enclosure
ching fabric
HK
TX1550nm/RX1310nm, LC, single
HK
TX1550nm/RX1310nm, LC, single
POE-SW24P-2G-440
24-ports 100Mbps Unmanaged PoE Switch
Specifications
POE-SW24P-2G-440
Port
Standard
Power Budget
, 10/100Mbps RJ45 ports
, 1000M Combo Port
IEEE802.3,802.3u,802.3x, 802.3af, 802.3at
.8Gbps
.55Mpps
1-8
-and-forward
802.3x full duplex
802.3af, IEEE802.3at
On:250m,10M,CAT 5e
Off:100m
-240V AC, 50/60Hz
440W
KV
: 0℃-40℃
: 10%-90% , non-condensing
: -40℃-70℃
: 5%-90% , non-condensing
.29kg
mm*285mm*43mm
-1.25G-20-1550: 1000M SFP module,
-155M-20-1550: 100M SFP module,
-mode single-fiber, 20km
-mode single-fiber, 20km