Cantek CTW-POE-EX01A Specsheet

W-POE/EX01A

W-Poe/EX01A can be installed at a greater distance than 100m (328 ft.) from
one another by connecting W-Poe/EX01A for every extra 100m (328 ft.) of
cable, both Ethernet and Poe can be extended to 200 m (656 ft.), 300 m (984
ft.) or even greater distances; depending on camera model and power source.
W-Poe/EX01A does not require any additional power supply and the
connected network camera is fed by a single Poe switch or midspan which
simplifies installation. W-Poe/EX01A offers two enthernet ports, which are both
configured automaticall for linkspped, duplex and crossover and the full-rate
network throughout is maintained.

W-POE-EX01A

Winic Technologies USA Inc.

42 Central avenue, Farmingdale, New York 11735 Tel:
[phone]
Fax: [phone]
Email:[e-mail]

W-POE-EX01A