Cantek CTW-12VDC-4P-10A Specsheet

W-12VDC-4P/10A

Camera DC Power Supply

Model

W-12VDC-4P/10A

Features

> Input 110/220 V AC
> Output 12V DC，4channels
> 10 Amp Supply Current
> Integral Surge Protection
> Individual LED Power Indication
> Individual PTC Output Protection
> Max. Amp: 2.5Amp/ch

W-12VDC-4P/10A

Model

W-12VDC-4P/10A

Specification

60W12V10A4P

Shape Dimension

24.5×20.8×8.1cm

Weight

2.02KG

Input

Input Voltage

110/220VAC

Input Voltage Frequency

50Hz～60Hz

Average Input Current

100Vac≤1.6A

Efficiency

≥80%

Output

Output Voltage

12VDC±5%

Output Current
10A，4channels for 4 sets load

Output Ripple Noise（Vp-p）

110mVp-p@25℃/
Rated input voltage & Output rated load

reply time of starting up

≤3S Input 100Vac，Output rated load

Fuse

Type /Rating

PTC 2.5A/60V

Protection

Over voltage protection

When over voltage occurs, it will be switch to
self-protection status to protect the load.

Over current protection

When over current occurs, the corresponding channel
output will automatically switch to self-protection status,
and the other channels output work normally, when
clearing of fault, then switch back to normal.

short-circuit protection

When short-circuit occurs, individual PTC fuse will break
the circuit, when clearing of fault, it switch back to normal
automatically.

Circumstances

Working Temperature

0℃～+50℃

Storage temperature

-20℃～+80℃

RH

20％～90％

Heat release

Natural heat dissipation

Connection
Input

Three-pin socket

Output

4channels output

Dielectric Strength
Input to output

1500Vac/60S leakage current≤1.5ma

Input to FG

1500Vac/60S leakage current≤2.0ma

FG to output

500Vac/60S leakage current≤1.5ma

Insulating strength

Input to output

≥20MΩ/500VDC@25℃

Leakage Current

≤0.02ma @AC110V（220V）/25℃

RG

≤0.012Ω@DC8V/25A/25℃

Inspection Equipment

YF9901 Digital Power Meter MW –MOS-620 20MHz Oscillograph

DZ2672A Hi-pot Tester VC9802A DMM

IT815 300W/0-120V Electronic Load DZ2620 Leak Resistance Tester

WB2678A RG Tester

Specifications