Cantek CT-POE-SW16PG-2GF-250 Specsheet

CT-POE-SW16PG-2GF-250

POE-SW16PG-2GF-250

16 ports High Power PoE Fiber switch 10/100/1000Mbps UpLink

Features

• Fully IEEE802.3af/at standard compliant

• Support PoE power up to 15.4W/30W for each PoE ports

• Auto detect powered device(PD)

• Safe and reliable power to most of PoE end device

• 10/100/1000Mbps Supported

Introduction

Winic 16 ports PoE Switches is 10/100/1000Mbps unmanged PoEswitches. It is designed for
growing businesses that want control over their network.. Easy Installation and Cable
Connection. As data and power are transmitted over one cable, the POE-SW16PG-2GF-250
does not need a second cable and electrical outlets on the wall, ceiling or any unreachable
place. Thus, it helps to lower the installation costs and simplify the installation effort. All the
RJ45 copper interfaces of the POE-SW16PG-2GF-250 support 10/100/1000Mbps auto­negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also
supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet
device without requiring special straight-through or crossover cables

CT-POE-SW16PG-2GF-250

POE-SW16PG-2GF-250

16 ports High Power PoE Fiber switch 10/100/1000Mbps UpLink

Specification:

Application:

Winic Technologies USA Inc.

42 Central avenue, Farmingdale, New York 11735
Tel: [phone]
Fax: [phone]
Email:[e-mail]
www.winictech.com

Design and specifications are subject to change without notice.